Is anyone making a billet hinge for 60-66 trucks ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lenguini · 06-19-2013, 12:19 AM

Is anyone making a billet hinge for 60-66 trucks ? I have talked with Ring Brothers,but no luck.I see them for 67 through 72 but........

Someone must make them ?

62-One-Ton · 06-19-2013, 01:36 AM

Porterbuilt all the way. I know they're not billet but they are freakin sweet.
Posted via Mobile Device

**MisterC** · 06-19-2013, 11:27 AM

Quote:

Originally Posted by 62-One-Ton

Porterbuilt all the way. I know they're not billet but they are freakin sweet.
Posted via Mobile Device

If only they'd kick out the gas assisted version for our models

**rideblue00** · 06-19-2013, 11:46 AM

those are sweet!

Modges'66 · 03-01-2015, 07:08 PM

I was looking myself and just spotted this!
Eddie Motorsports...

http://www.autopressreleases.com/vie...se.php?id=1856

Modges'66 · 03-01-2015, 07:16 PM

It seems that Classic Parts also has them now.

http://www.classicparts.com/1960-66-.../#.VPOdpkK4k0o

LDO · 03-01-2015, 07:24 PM

I've only seen them for the 55-57 trucks and I will tell you that they don't open the hood all the way when compared to the stock hinge.

NevEno · 03-01-2015, 07:28 PM

Classic parts of America has 1960-66 Billet Hood Hinges for 674.95 a set.

http://www.classicparts.com/Fender-H...oducts/236/6/0

**MisterC** · 03-01-2015, 07:30 PM

Laidbackrecreations carries them and they're board vendors with a great reputation for service and great pricing

http://67-72chevytrucks.com/vboard/s...d.php?t=642901

AustinBelair · 03-02-2015, 01:33 AM

Quote:

Originally Posted by Modges'66

It seems that Classic Parts also has them now.

http://www.classicparts.com/1960-66-.../#.VPOdpkK4k0o

Those are pretty but good grief, I'd never pay that much for hood hinges.

**joedoh** · 03-02-2015, 01:39 AM

they are direct replacement? thats a lotta ducks for hinges that still hit the tire on a lowered truck if so. on the other hand, they are stunning!

watkins boyz · 04-07-2015, 06:08 PM

has anyone used these?

lenguini · 04-08-2015, 01:49 AM

Will be buying a set in the future,nice looking hinge...about time!

watkins boyz · 04-08-2015, 09:57 PM

Quote:

Originally Posted by lenguini

Will be buying a set in the future,nice looking hinge...about time!

well let me know cuz the eddie motorsports ones I got will not let the hood close in the back I have the weakest shocks they make and still nothing . no shocks it will open and close fine but not with shocks. plus there customer service sucks the owner was a complete ass basically told me tough **** . 800 bucks and out of luck

lenguini · 04-09-2015, 02:56 AM

Quote:

Originally Posted by watkins boyz

well let me know cuz the eddie motorsports ones I got will not let the hood close in the back I have the weakest shocks they make and still nothing . no shocks it will open and close fine but not with shocks. plus there customer service sucks the owner was a complete ass basically told me tough **** . 800 bucks and out of luck

Sorry to hear the bad news,they sound like a bunch of a holes...time for the better business bureau.Maybe your credit card company can help?

Im gonna rethink think buying any,probably another piece of crap made in china !

blazins10 · 04-12-2015, 11:25 AM

Quote:

Originally Posted by MisterC

If only they'd kick out the gas assisted version for our models

Ph now offers gas assist for 60-66, I have them , they're great

http://pbfab.com/shop/60-66-cowl-mou...s-gas-assisted

06-19-2013, 12:19 AM	#1
lenguini Registered User Join Date: Oct 2010 Location: Kelowna B.C. Posts: 743	Is anyone making a billet hinge for 60-66 trucks ? Is anyone making a billet hinge for 60-66 trucks ? I have talked with Ring Brothers,but no luck.I see them for 67 through 72 but........ Someone must make them ? Attached Images __________________ Always a place in my heart for old Chevy trucks: My build thread-project truck dream 65" http://67-72chevytrucks.com/vboard/s...d.php?t=510863

06-19-2013, 01:36 AM	#2
62-One-Ton Registered User Join Date: Feb 2012 Location: Rescue, CA Posts: 255	Re: Is anyone making a billet hinge for 60-66 trucks ? Porterbuilt all the way. I know they're not billet but they are freakin sweet. Posted via Mobile Device __________________ Project Change of Plans: http://67-72chevytrucks.com/vboard/s...d.php?t=513135 '62 C10 SWB '03 Express Van 5.3l Dead (parting out and using motor) '99 Silverado 4.8l 5 speed 4wd

06-19-2013, 11:46 AM	#4
rideblue00 Senior Member Join Date: Feb 2010 Location: Lambertville, MI Posts: 1,861	Re: Is anyone making a billet hinge for 60-66 trucks ? those are sweet!

03-01-2015, 07:08 PM	#5
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Is anyone making a billet hinge for 60-66 trucks ? I was looking myself and just spotted this! Eddie Motorsports... http://www.autopressreleases.com/vie...se.php?id=1856 __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

03-01-2015, 07:16 PM	#6
Modges'66 Registered User Join Date: Feb 2012 Location: Grand Rapids, Michigan, otherwise known as Beer City U.S.A. Posts: 1,081	Re: Is anyone making a billet hinge for 60-66 trucks ? It seems that Classic Parts also has them now. http://www.classicparts.com/1960-66-.../#.VPOdpkK4k0o __________________ My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=512904

03-01-2015, 07:24 PM	#7
LDO Registered User Join Date: Feb 2011 Location: Senatobia, MS Posts: 1,295	Re: Is anyone making a billet hinge for 60-66 trucks ? I've only seen them for the 55-57 trucks and I will tell you that they don't open the hood all the way when compared to the stock hinge. __________________ Once a Marine, always a Marine! My (Her) 57 Build "Beverly" My 66 Build "Betty" My 85 C10 "Old Blue" Help Me Find "Old Blue" OLD BLUE PART II

03-01-2015, 07:28 PM	#8
NevEno Registered User Join Date: Aug 2014 Location: oklahoma Posts: 357	Re: Is anyone making a billet hinge for 60-66 trucks ? Classic parts of America has 1960-66 Billet Hood Hinges for 674.95 a set. http://www.classicparts.com/Fender-H...oducts/236/6/0 __________________ You can find me on Instagram @neveno_cten

03-01-2015, 07:30 PM	#9
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: Is anyone making a billet hinge for 60-66 trucks ? Laidbackrecreations carries them and they're board vendors with a great reputation for service and great pricing http://67-72chevytrucks.com/vboard/s...d.php?t=642901 __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

03-02-2015, 01:39 AM	#11
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: Is anyone making a billet hinge for 60-66 trucks ? they are direct replacement? thats a lotta ducks for hinges that still hit the tire on a lowered truck if so. on the other hand, they are stunning! __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

04-07-2015, 06:08 PM	#12
watkins boyz Registered User Join Date: Oct 2012 Location: kalkaska mi Posts: 54	Re: Is anyone making a billet hinge for 60-66 trucks ? has anyone used these?

04-08-2015, 01:49 AM	#13
lenguini Registered User Join Date: Oct 2010 Location: Kelowna B.C. Posts: 743	Re: Is anyone making a billet hinge for 60-66 trucks ? Will be buying a set in the future,nice looking hinge...about time! Attached Images __________________ Always a place in my heart for old Chevy trucks: My build thread-project truck dream 65" http://67-72chevytrucks.com/vboard/s...d.php?t=510863

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.