New member from DFW, first truck build not starting where I thought!

[Claytona08]

Originally Posted by cyclefreak207

My brother built a pretty nice shop out at his place, but he lives like 45-hour depending on traffic conditions. but I have a detached garage at my apt that I pay an extra 40$ a month for... not too bad, I still keep all my tools in teh apartment though :p

I want to build a shop at my house but my wife thinks it's a waste of money and I don't have much land. A 1/4" acre lot doesn't leave much room for a shop....lol. Looks like I need a new piece of property.

[cyclefreak207]

Originally Posted by Claytona08

I want to build a shop at my house but my wife thinks it's a waste of money and I don't have much land. A 1/4" acre lot doesn't leave much room for a shop....lol. Looks like I need a new piece of property.

Agreed! mo bigga is mo betta! And I don't know if I mentioned on the last page, I'm dropping my bike at my brothers to see if he can get me the two sensors (that we think we need) so I can start riding my bike to work and around to save money on gas! We've rebuilt the whole motor, gone through all the wiring (not my favorite, or my forte) and the last thing we can figure is crank position sensor and/or cam position sensor.

[Claytona08]

Originally Posted by cyclefreak207

Agreed! mo bigga is mo betta! And I don't know if I mentioned on the last page, I'm dropping my bike at my brothers to see if he can get me the two sensors (that we think we need) so I can start riding my bike to work and around to save money on gas! We've rebuilt the whole motor, gone through all the wiring (not my favorite, or my forte) and the last thing we can figure is crank position sensor and/or cam position sensor.

Sweet, good luck with that!

[cyclefreak207]

Hopefully it's the fix... or else I'm just going to leave my tailgate down and let it fall out on the highway. If it works, I'll be back to murdering street! lol

[Sodell]

Originally Posted by Claytona08

?
Posted via Mobile Device

Had one of those old man moments, posted on the wrong thread..lol

[Claytona08]

Originally Posted by Sodell

Had one of those old man moments, posted on the wrong thread..lol

Haha, not a problem. I have the Platinum C10 project. Check out my paint choices on my thread and give me some input if you don't mind.
Posted via Mobile Device

[cyclefreak207]

So no truck updates from over the weekend :p butttt,
Took my bike out to my brothers to find out they're working on a 71 long bed, VERYYY clean, some guy brought it to him after he'd seen how we did mine.

And went to the movies sunday, saw that White House Down movie. EXCELLENTTTT! lol
Had to share, it was that good haha.

[cyclefreak207]

Originally Posted by Claytona08

Haha, not a problem. I have the Platinum C10 project. Check out my paint choices on my thread and give me some input if you don't mind.
Posted via Mobile Device

Haven't decided on paint yet? Those wheels will look killer with whatever color you decide though for sure!

[77ChevySharkBite]

Nice!!! Yeah I agree I think a shop is a must.

For me my shop, is going to be my man cave and business area. I want to build one at my parent's house but I'll be breaking home owner's code

I've actually thought about taking a bit of a risk and opening my own shop and do a little bit of everything restore car/trucks, oil changes, audio, make it like a 1 stop shop and not rip everybody off like some places do.

[cyclefreak207]

Originally Posted by 77ChevySharkBite

Nice!!! Yeah I agree I think a shop is a must.

For me my shop, is going to be my man cave and business area. I want to build one at my parent's house but I'll be breaking home owner's code

I've actually thought about taking a bit of a risk and opening my own shop and do a little bit of everything restore car/trucks, oil changes, audio, make it like a 1 stop shop and not rip everybody off like some places do.

Me and one of the guys from work were talking about that last idea... but it's jsut so risky... it could be REALLY good and successful, or REALLY bad and fail... scares me...

[77ChevySharkBite]

Originally Posted by cyclefreak207

Me and one of the guys from work were talking about that last idea... but it's jsut so risky... it could be REALLY good and successful, or REALLY bad and fail... scares me...

Well I'm not genius but the smart idea or the way I was planning to do it, me and a good friend is rent out a building something small that you could fit a few cars/trucks in, and start small and you know if it hits and business starts booming find something bigger to go after. Not go out and build this crazy huge shop and fall flat on your face, but also man it takes word of mouth to help you out as well, they say that's the best business is word of mouth.

[cyclefreak207]

Originally Posted by 77ChevySharkBite

Well I'm not genius but the smart idea or the way I was planning to do it, me and a good friend is rent out a building something small that you could fit a few cars/trucks in, and start small and you know if it hits and business starts booming find something bigger to go after. Not go out and build this crazy huge shop and fall flat on your face, but also man it takes word of mouth to help you out as well, they say that's the best business is word of mouth.

Yea, I hear that, but unfortunately just because of all my legal bills that I'm trying to finish taking care of money hasn't really been in the cards for me for the last 3 years... So most of my builds rely on hookups, good luck, and doing everything my self with good friends to help!

[77ChevySharkBite]

Originally Posted by cyclefreak207

Yea, I hear that, but unfortunately just because of all my legal bills that I'm trying to finish taking care of money hasn't really been in the cards for me for the last 3 years... So most of my builds rely on hookups, good luck, and doing everything my self with good friends to help!

Yeah I hear ya man, yeah it always a good thing to have good friends that can lend a hand when you need it!

[Claytona08]

Originally Posted by cyclefreak207

Haven't decided on paint yet? Those wheels will look killer with whatever color you decide though for sure!

Still undecided on the gray I am going to use. I want a gray that isn't to dark but is darker than silve

[Claytona08]

Originally Posted by 77ChevySharkBite

Yeah I hear ya man, yeah it always a good thing to have good friends that can lend a hand when you need it!

I got a 4 1/2 year old son that helps me out....lol

[77ChevySharkBite]

Originally Posted by Claytona08

I got a 4 1/2 year old son that helps me out....lol

Help is help! Don't matter the age

I'm praying that when I have kids I'll have one that's a car junkie.

[Claytona08]

Originally Posted by 77ChevySharkBite

Help is help! Don't matter the age

I'm praying that when I have kids I'll have one that's a car junkie.

Oh yeah. My son just wants to be around me at all times. Sometimes he slows me down (He gets confused when I ask him for different tools) but I wouldn't have it any other way!

[77ChevySharkBite]

Originally Posted by Claytona08

Oh yeah. My son just wants to be around me at all times. Sometimes he slows me down (He gets confused when I ask him for different tools) but I wouldn't have it any other way!

It's memories that are being made and won't ever be replaced. To me even though I'm older now the smallest moments are the biggest moments in a childs life.

[cyclefreak207]

Here's a few of my nephew! lol First one is him tightening the spark plugs in my 646 motor, and the second is helping out on the Gixxer tranny for the bobber haha.

[Claytona08]

Haha, Like Sharkbite said...Memories being made!

[cyclefreak207]

*636 motor

[77ChevySharkBite]

Gotta start them young that's all I'm saying

[cyclefreak207]

Originally Posted by 77ChevySharkBite

Gotta start them young that's all I'm saying

I wish I got started that young... My dad never wanted me working on cars, always wanted me to go to school. and get a degree or some noise like that lol.

And look where I am today

[77ChevySharkBite]

Originally Posted by cyclefreak207

I wish I got started that young... My dad never wanted me working on cars, always wanted me to go to school. and get a degree or some noise like that lol.

And look where I am today

Neither did I, my dad always knew I was passionate about cars as a general and wanted to restore one, we just never had the money to do so and we got it sort of now but still have our low points as you see and I have to stick with simple things but it's fine by me cause I'm building me a truck. I grew up around the Old School Hot Rods, went to car shows things like that but never experienced the build part of it. My parents only graduated high school, so they want me to get a degree and I want one for myself.

And your doing a great job man!

[cyclefreak207]

Yep! my mom only graduated high school, but my dad put himself through college at Rhodes in memphis TN, so he's always been a hard a*s about working for what you have, I hated it back then, but I love the fact that everything I have today is because I worked my a*s off for it! Feels good, but there's no way I was gonna go through college, just couldn't do it, wound up behind a desk anyways selling parts, but side jobbin it up, and building my own projects.