Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lchall · 07-02-2013, 08:36 AM

I'd be interested as well.

chevyguy_72 · 07-02-2013, 08:39 AM

I would be in for one... or two...

Number98 · 07-02-2013, 11:51 AM

Quote:

Originally Posted by Daveboyd

I am tossing around the idea of doing a Group Buy this month. Anyone Interested?

Do you offer a Burb tank? If so I am interested.

Gus350 · 07-02-2013, 01:10 PM

Quote:

Originally Posted by Bennett--G4L

I'm interested in this, also do you have a top fill tank with the fill mounted closer to the center instead of towards the side of the tank

I would be interested in one like this also..

wkends · 07-03-2013, 10:54 PM

Yes, put me down for a buy.

Sammy · 07-05-2013, 09:38 AM

Carb setup, rollover vent, and float in for a possible deal.

C20-67_N_MO · 07-06-2013, 08:13 AM

Quote:

Originally Posted by Sammy

Carb setup, rollover vent, and float in for a possible deal.

Same here.

I may not be quiet ready for this yet but this is one smoking deal!

C10_ustacould · 07-06-2013, 10:15 AM

I'm interested... I need an efi tank with bed fill, sending unit, and roll over valve. LMK

allons · 07-06-2013, 10:25 AM

I'm interested in a group buy! My build is at the point where the tank is next. I've got a LWB 1/2 ton. The rear cross members behind the track bar mount have been removed and a new cross member added to the very rear of the frame rails so that I can get as large (capacity) tank as possible. Mine is set up for a side fill. LMK!

john@thepier · 07-06-2013, 07:08 PM

I also will be needing a tank, put me in for a group buy price. John

C20-67_N_MO · 07-07-2013, 07:21 AM

Quote:

Originally Posted by C20-67_N_MO

Same here.

I may not be quiet ready for this yet but this is one smoking deal!

Adding that I need bed fill tank.

hozeman469 · 07-07-2013, 03:29 PM

Hey I'll jump in on this as well.Will be needing one before long.

lynnfield · 07-07-2013, 10:58 PM

Dave, I just ordered one from you, due to ship out this week, wednesday you said. I could wait for the group buy, I won't need it til the end of the month. Greg

blazed870 · 07-08-2013, 04:57 PM

I'm in for the group buy

Beaumont@ · 07-09-2013, 12:46 AM

Yes I am interested in the group buy

kpc01 · 07-10-2013, 12:12 AM

I've read through this thread a few times and also looked through the othe forums but hoping someone can chime in with some real life knowledge. I am looking to get an EFI side fill tank for mjy 64 suburban that will also have the porterbuilt setup. From what I can tell this will work for me but looking for some 63-66 people that have this tank for some feedback please. if it will work I'll jump in this group buy!

msgross · 07-10-2013, 01:12 AM

amazing how popular these have become... I helped design the first tank that Dave started making for our trucks. Others have kits out there but the prices are way higher...

BTW, I still have mine sitting in storage! I like the newer designs with the curved rear portion.

**Clyde65** · 07-10-2013, 08:31 AM

I got one a year+ ago, it fit like a glove and has worked flawlessly since. I replaced a poly tank that worked but wasn't very big or nice to look at.

If I remember correctly, all group buys are through Pro Performance guys, yes you can go through Dave's website to purchase, but I think PP has the GB.

Good luck to all!

chevyguy_72 · 07-10-2013, 11:36 AM

Quote:

Originally Posted by Clyde65

I got one a year+ ago, it fit like a glove and has worked flawlessly since. I replaced a poly tank that worked but wasn't very big or nice to look at.

If I remember correctly, all group buys are through Pro Performance guys, yes you can go through Dave's website to purchase, but I think PP has the GB.

Good luck to all!

Actually Dave posted back on the 1st that he was thinking of doing the group buy this month...

C10_ustacould · 07-10-2013, 08:58 PM

Is this going to happen?

**mfm3** · 07-11-2013, 02:13 AM

Seriously interested and ready to pull the trigger.

Sammy · 07-11-2013, 08:46 AM

Likewise.. Dave no more teaser posts lets roll, awaiting your post.

kpc01 · 07-11-2013, 09:12 AM

Quote:

Originally Posted by Clyde65

I got one a year+ ago, it fit like a glove and has worked flawlessly since. I replaced a poly tank that worked but wasn't very big or nice to look at.

If I remember correctly, all group buys are through Pro Performance guys, yes you can go through Dave's website to purchase, but I think PP has the GB.

Good luck to all!

Clyde,

My frame should be the same as yours so good to know it will mount up. refresh my memory, how low is your truck? Also any idea on how low the tank hangs below the frame? Hoping to go all the way down with porterbuilt so thinking I may have to mount the tank inside the frame rails for a little extra clearance, but curious about how low it hangs below the frame on yours?

**Clyde65** · 07-11-2013, 10:03 AM

Quote:

Originally Posted by kpc01

Clyde,

My frame should be the same as yours so good to know it will mount up. refresh my memory, how low is your truck? Also any idea on how low the tank hangs below the frame? Hoping to go all the way down with porterbuilt so thinking I may have to mount the tank inside the frame rails for a little extra clearance, but curious about how low it hangs below the frame on yours?

My truck is about 4.5-5" dropped in the back. It hangs about 4 or so inches below the rails IIRC. If you have your bed off and you are planning on raising the bed floor, you could mount it on top of the rails. Ill try and get you a pic of the tank and the placement in the morning.

C20-67_N_MO · 07-11-2013, 10:22 AM

Quote:

Originally Posted by mfm3

Seriously interested and ready to pull the trigger.

Quote:

Originally Posted by Sammy

Likewise.. Dave no more teaser posts lets roll, awaiting your post.

I'm with you guys as well.

Gonna give until Monday July 15, 2013 then I'm out.

07-02-2013, 08:36 AM	#751
lchall Registered User Join Date: Feb 2008 Location: St. Charles, MO Posts: 291	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'd be interested as well. __________________ 1967 Chevy SWB 1972 Chevy SWB 1972 Chevy SWB K20 4x4 1991 Ford F-150 2013 Dodge Ram 1500 4x4

07-02-2013, 08:39 AM	#752
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I would be in for one... or two...

07-03-2013, 10:54 PM	#755
wkends Registered User Join Date: Nov 2007 Location: Kentucky Posts: 37	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Yes, put me down for a buy.

07-05-2013, 09:38 AM	#756
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Carb setup, rollover vent, and float in for a possible deal. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

07-06-2013, 10:15 AM	#758
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm interested... I need an efi tank with bed fill, sending unit, and roll over valve. LMK __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

07-06-2013, 10:25 AM	#759
allons Registered User Join Date: Apr 2013 Location: West Liberty, Ohio Posts: 288	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm interested in a group buy! My build is at the point where the tank is next. I've got a LWB 1/2 ton. The rear cross members behind the track bar mount have been removed and a new cross member added to the very rear of the frame rails so that I can get as large (capacity) tank as possible. Mine is set up for a side fill. LMK!

07-06-2013, 07:08 PM	#760
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I also will be needing a tank, put me in for a group buy price. John

07-07-2013, 03:29 PM	#762
hozeman469 Registered User Join Date: Mar 2012 Location: Monroe, Louisiana Posts: 40	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Hey I'll jump in on this as well.Will be needing one before long.

07-07-2013, 10:58 PM	#763
lynnfield The Waco Kid Join Date: Oct 2009 Location: Waco, TX. Posts: 1,781	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, I just ordered one from you, due to ship out this week, wednesday you said. I could wait for the group buy, I won't need it til the end of the month. Greg

07-08-2013, 04:57 PM	#764
blazed870 Registered User Join Date: Jan 2009 Location: Bakersfield, CA Posts: 47	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm in for the group buy

07-09-2013, 12:46 AM	#765
Beaumont@ Registered User Join Date: Jul 2011 Location: Western Canada Posts: 239	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Yes I am interested in the group buy

07-10-2013, 12:12 AM	#766
kpc01 Registered User Join Date: Aug 2011 Location: DFW TX (Oak Point) Posts: 148	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I've read through this thread a few times and also looked through the othe forums but hoping someone can chime in with some real life knowledge. I am looking to get an EFI side fill tank for mjy 64 suburban that will also have the porterbuilt setup. From what I can tell this will work for me but looking for some 63-66 people that have this tank for some feedback please. if it will work I'll jump in this group buy!

07-10-2013, 01:12 AM	#767
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank amazing how popular these have become... I helped design the first tank that Dave started making for our trucks. Others have kits out there but the prices are way higher... BTW, I still have mine sitting in storage! I like the newer designs with the curved rear portion. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-10-2013, 08:31 AM	#768
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I got one a year+ ago, it fit like a glove and has worked flawlessly since. I replaced a poly tank that worked but wasn't very big or nice to look at. If I remember correctly, all group buys are through Pro Performance guys, yes you can go through Dave's website to purchase, but I think PP has the GB. Good luck to all! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

07-10-2013, 08:58 PM	#770
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Is this going to happen? __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD



Register or Log In To remove these advertisements.

07-11-2013, 02:13 AM	#771
mfm3 Active Member Join Date: Feb 2013 Location: DFW TX Posts: 133	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Seriously interested and ready to pull the trigger.

07-11-2013, 08:46 AM	#772
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Likewise.. Dave no more teaser posts lets roll, awaiting your post. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.