KS Christmas BONANZA ALOT of 67-72 truck parts!! - Page 40 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hubscrub · 07-10-2013, 09:55 PM

Quote:

Originally Posted by teeitup

Hubscrub, Here they are, I don't see any cracks but will take them off Sat to make sure. I did notice the pass side one has one stud thats weathered, it may need replaced.

Great!, i'll take them when you get them off, pm me info when possible thanks

woodfork1 · 07-11-2013, 08:49 AM

Do you have a good AC condenser for a 1971 C10?

Sairsyfairy · 07-11-2013, 09:18 AM

Do you happen to have headlight bezels for a 67 GMC? Also a fan shroud for a 350?

70 stepside · 07-11-2013, 03:03 PM

Good Afternoon, Looking for passenger stepside fender, and a 71-72 throttle pedal with plastic seat along with cable. How much? 85043

crimespree · 07-12-2013, 01:11 AM

Quote:

Originally Posted by teeitup

Hubscrub, I'll get pics tonight, $45 plus shipping for a pair

crimespree, all I have are the inner backing plates, sorry

Thanks Randy

How much are those going for nowadays? I have no side mirrors to speak of so I would still need the backing plates. and I don't think lmc has them in their mirror package.

teeitup · 07-12-2013, 06:26 AM

Hubscrub, I should have time Sat to ge them off and get a quote and better pics

woodfork1, I'll look

Sairsyfairy, sorry no 67 gmc bezels, I only have one shroud and it has a chunk missing on lower side

70 stepside, sorry no step fenders, I have complete gas pedal assembly for $41 shipped

crimespree, I have not tried to get the screws out of these, they may take some work to get broke loose, $16 shipped for the pair

Thanks Randy

70 stepside · 07-12-2013, 09:59 AM

Im intetested in gas pedal assembly. Do you have a picture of the gas pedal assembly?
Posted via Mobile Device

Hubscrub · 07-13-2013, 08:18 AM

Quote:

Originally Posted by teeitup

Hubscrub, I should have time Sat to ge them off and get a quote and better pics

Thanks Randy

thanks, sounds good sent you a pm of my shipping info for you quote

teeitup · 07-13-2013, 06:14 PM

Hubscrub, pass side ended up being cracked, I have this drivers side, $20 plus shipping

teeitup · 07-13-2013, 06:15 PM

70stepside, here it is

Hubscrub · 07-13-2013, 06:31 PM

Quote:

Originally Posted by teeitup

Hubscrub, pass side ended up being cracked, I have this drivers side, $20 plus shipping

ok thats fine

70 stepside · 07-13-2013, 10:09 PM

Just PM you Teeitup i want the pedal set up....many thanks
Posted via Mobile Device

Hubscrub · 07-16-2013, 05:35 PM

Quote:

Originally Posted by teeitup

Hubscrub, pass side ended up being cracked, I have this drivers side, $20 plus shipping

Payment sent

teeitup · 07-17-2013, 03:39 PM

Hubscrub, I'll get it boxed up and shipped out this week, Thanks Randy

70 stepside · 07-17-2013, 03:49 PM

Teeitup...i sent payment this padt
Saturday for gas pedal.
Posted via Mobile Device

70 stepside · 07-17-2013, 03:53 PM

Let me know if you need anything else,

thanks again
Tom
Posted via Mobile Device

dazza · 07-18-2013, 12:19 PM

I don't believe driver's or passenger side is different but I'm looking for the driver's door latch handle mech as circled in the picture. Price shipped to 94505?

teeitup · 07-18-2013, 01:37 PM

dazza, sorry sold the oens I had. Also they are different drivers and pass, spring tension and 67-71 is shorter and 72 is longer. Thanks Randy

KMC3420 · 07-18-2013, 02:20 PM

How much for a 5 lug center cap with the yellow bow tie, if you still have one left?

dazza · 07-18-2013, 03:00 PM

ok, thanks for clarifying the differences. Also. I didn't see in your photos but how about a SWB, in front of rear tire, left side fender brace?

dazza · 07-18-2013, 03:06 PM

Just reading again what you said about the differences. Are you saying the drivers side and the passengers side have different spring tensions? If that's the case, I'm going to have to get both sides because one spring is broke and there is no way to compare, unless you or somebody may know how to tell the diff. no part number that I can see.

70RedBlurr · 07-18-2013, 03:44 PM

I am doing a four speed swap and need the engine bracket that holds the pivot ball for the zbar on a small block chevy, a stock air intake for a four barrel carb on a small block chevy, bolts to retain the fan shroud to radiator support brackets, and the bracket that allows the power steer pump to adjust, attaches to the block somehow, on a longwater pump? Let me know what you have and some photos would be great. I am located in CA.

Thanks

cltmatt · 07-18-2013, 04:19 PM

I am looking for a 2 piece driveshaft for a 1972 chevy shortbox with a 402 th400 shortshaft.Do you have anything? Thanks

teeitup · 07-20-2013, 09:11 AM

KMC3420, I'll look Sun

dazza, I have a door handle regs on a 71 I'm parting, I'll see if they are any good. Sorry no fender brace

70redblur, sorry none of that right now

cltmatt, sorry none of them

Thanks Randy

Hubscrub · 07-21-2013, 03:53 PM

Manifold arrived, good doing business with you thanks.

07-11-2013, 08:49 AM	#977
woodfork1 Registered User Join Date: Dec 2012 Location: Houma, LA Posts: 95	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Do you have a good AC condenser for a 1971 C10?

07-11-2013, 09:18 AM	#978
Sairsyfairy Registered User Join Date: Jun 2013 Location: Pottstown, Pennsylvania Posts: 6	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Do you happen to have headlight bezels for a 67 GMC? Also a fan shroud for a 350?

07-11-2013, 03:03 PM	#979
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Good Afternoon, Looking for passenger stepside fender, and a 71-72 throttle pedal with plastic seat along with cable. How much? 85043

07-12-2013, 06:26 AM	#981
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Hubscrub, I should have time Sat to ge them off and get a quote and better pics woodfork1, I'll look Sairsyfairy, sorry no 67 gmc bezels, I only have one shroud and it has a chunk missing on lower side 70 stepside, sorry no step fenders, I have complete gas pedal assembly for $41 shipped crimespree, I have not tried to get the screws out of these, they may take some work to get broke loose, $16 shipped for the pair Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-12-2013, 09:59 AM	#982
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Im intetested in gas pedal assembly. Do you have a picture of the gas pedal assembly? Posted via Mobile Device

07-13-2013, 06:14 PM	#984
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Hubscrub, pass side ended up being cracked, I have this drivers side, $20 plus shipping Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-13-2013, 06:15 PM	#985
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! 70stepside, here it is Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-13-2013, 10:09 PM	#987
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Just PM you Teeitup i want the pedal set up....many thanks Posted via Mobile Device

07-17-2013, 03:39 PM	#989
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Hubscrub, I'll get it boxed up and shipped out this week, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-17-2013, 03:49 PM	#990
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Teeitup...i sent payment this padt Saturday for gas pedal. Posted via Mobile Device

07-17-2013, 03:53 PM	#991
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Let me know if you need anything else, thanks again Tom Posted via Mobile Device

07-18-2013, 12:19 PM	#992
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: Christmas BONANZA ALOT of 67-72 truck parts!! I don't believe driver's or passenger side is different but I'm looking for the driver's door latch handle mech as circled in the picture. Price shipped to 94505? Attached Images __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

07-18-2013, 01:37 PM	#993
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! dazza, sorry sold the oens I had. Also they are different drivers and pass, spring tension and 67-71 is shorter and 72 is longer. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-18-2013, 02:20 PM	#994
KMC3420 Registered User Join Date: Dec 2012 Location: Harrison, AR Posts: 1,065	Re: Christmas BONANZA ALOT of 67-72 truck parts!! How much for a 5 lug center cap with the yellow bow tie, if you still have one left? __________________ Keagan 68 SWB C-10 original 350 A/C 503 Mean Green

07-18-2013, 03:00 PM	#995
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: Christmas BONANZA ALOT of 67-72 truck parts!! ok, thanks for clarifying the differences. Also. I didn't see in your photos but how about a SWB, in front of rear tire, left side fender brace? Attached Images __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----



Register or Log In To remove these advertisements.

07-18-2013, 03:06 PM	#996
dazza Registered User Join Date: Aug 2002 Location: California Posts: 971	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Just reading again what you said about the differences. Are you saying the drivers side and the passengers side have different spring tensions? If that's the case, I'm going to have to get both sides because one spring is broke and there is no way to compare, unless you or somebody may know how to tell the diff. no part number that I can see. __________________ --------------------------------------------------------- I'm not crazy, I'm chosen, there's a difference. ---------------------------- '72 K10 SWB, 350, sm465/np205 ---- ----

07-18-2013, 03:44 PM	#997
70RedBlurr Registered User Join Date: Dec 2007 Location: Central Coast Posts: 77	Re: Christmas BONANZA ALOT of 67-72 truck parts!! I am doing a four speed swap and need the engine bracket that holds the pivot ball for the zbar on a small block chevy, a stock air intake for a four barrel carb on a small block chevy, bolts to retain the fan shroud to radiator support brackets, and the bracket that allows the power steer pump to adjust, attaches to the block somehow, on a longwater pump? Let me know what you have and some photos would be great. I am located in CA. Thanks

07-18-2013, 04:19 PM	#998
cltmatt Registered User Join Date: May 2008 Location: clear lake, wisconsin Posts: 1	Re: Christmas BONANZA ALOT of 67-72 truck parts!! I am looking for a 2 piece driveshaft for a 1972 chevy shortbox with a 402 th400 shortshaft.Do you have anything? Thanks

07-20-2013, 09:11 AM	#999
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Christmas BONANZA ALOT of 67-72 truck parts!! KMC3420, I'll look Sun dazza, I have a door handle regs on a 71 I'm parting, I'll see if they are any good. Sorry no fender brace 70redblur, sorry none of that right now cltmatt, sorry none of them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-21-2013, 03:53 PM	#1000
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Christmas BONANZA ALOT of 67-72 truck parts!! Manifold arrived, good doing business with you thanks. __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.