1967 GMC C1500 SS 4.1L build thread - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Druman · 07-22-2013, 08:56 AM

Name: paint 13.jpg
Views: 1105
Size: 30.5 KB

after removing all the paint and one inch of bondo. i found out that someone put a 68 fender on the rt side.

Druman · 07-29-2013, 03:30 PM

Name: 130728_0009.jpg
Views: 1049
Size: 80.1 KB

Name: 130728_0005.jpg
Views: 1060
Size: 93.5 KB

Name: 130728_0004.jpg
Views: 1042
Size: 94.4 KB

finally finished the grill, covered it in a little pistachio.

Bow Commander · 07-29-2013, 08:05 PM

Looking great! It's come a long way!
Posted via Mobile Device

67_C-30 · 07-29-2013, 09:56 PM

Looking good! I live about 15 miles from Salem. Kudos for sticking with the 6 banger. The racing stripe on the valve cover makes it look surprisingly peppy!

Just an observation here - so don't take it personal - but I'd lose that rear bumper! JMO...

Druman · 07-30-2013, 10:24 AM

Quote:

Originally Posted by Bow Commander

Looking great! It's come a long way!
Posted via Mobile Device

thank you,

Druman · 07-30-2013, 10:37 AM

Quote:

Originally Posted by 67_C-30

Looking good! I live about 15 miles from Salem. Kudos for sticking with the 6 banger. The racing stripe on the valve cover makes it look surprisingly peppy!

Just an observation here - so don't take it personal - but I'd lose that rear bumper! JMO...

Thank you for the kudos it means allot. Some of my closest friends and family tried there best to push away from the 250L but there is just something classy about resto mode. The bumper will have its day. I have to get a few things done on the honey do list before I get to deep into customizing.

Comments and suggestions are always welcome.

Druman · 08-05-2013, 12:35 PM

Name: 130805_0003.jpg
Views: 986
Size: 99.6 KB

bumper installed and bed painted.

Druman · 09-09-2013, 01:58 PM

Name: Cnotch LT.jpg
Views: 937
Size: 38.3 KB

Name: Cnotch RT.jpg
Views: 937
Size: 38.2 KB

Name: 130908_0004.jpg
Views: 934
Size: 24.3 KB

finally installed my C-notch and center caps.

Druman · 09-09-2013, 02:07 PM

Name: 130908_0006.jpg
Views: 942
Size: 23.9 KB

zammer · 09-14-2013, 09:38 AM

looks good in sucha short period, good job!

Druman · 09-17-2013, 10:17 AM

Quote:

Originally Posted by zammer

looks good in sucha short period, good job!

Thank you, kudos always makes for a good motivational tool for forward progression on this old rig. next order of business is the front drum brakes(refurbishment)

Druman · 09-24-2013, 08:44 AM

Name: 130919_0001.jpg
Views: 848
Size: 53.8 KB

Name: 130919_0002.jpg
Views: 849
Size: 53.6 KB

working on getting the front rubber and brakes referb.

**steelhorse** · 09-24-2013, 10:13 AM

Nice work. I like the 6cyl but also like the red better. Just my preference.

Druman · 09-30-2013, 12:04 PM

Name: 130927_0004.jpg
Views: 790
Size: 38.6 KB

Name: 130927_0009.jpg
Views: 800
Size: 27.5 KB

Name: 130928_0001.jpg
Views: 803
Size: 37.3 KB

right side done on to the left.

Druman · 10-15-2013, 10:01 AM

well after all that work of replacing all brake components I started bleeding the brakes and found out the wheel cylinders where not remand right the bleeder screw leaked, the line leaked and the old master cylinder leaked all under my dash. Back to the drawing board. Returning all parts to day so I can try a new manufacture. I know what you all are thinking just do a disc brake conversion. Well I am part of the government shutdown so that will have to wait. Drum brake repair for now.
Name: 131002_0003.jpg
Views: 775
Size: 32.1 KB

Name: 131002_0003.jpg
Views: 775
Size: 32.1 KB

Name: 131012_0008.jpg
Views: 772
Size: 42.5 KB

Name: 131013_0001.jpg
Views: 769
Size: 28.5 KB

Name: 131013_0003.jpg
Views: 769
Size: 36.6 KB

Name: 131013_0004.jpg
Views: 762
Size: 28.2 KB

trac209 · 10-15-2013, 10:49 AM

One word for you"wicked". Awesome work

Druman · 10-15-2013, 03:44 PM

Quote:

Originally Posted by trac209

One word for you"wicked". Awesome work

Thank you for that.

Druman · 10-15-2013, 03:47 PM

Name: 131007_0002.jpg
Views: 727
Size: 40.9 KB

Name: 131007_0003.jpg
Views: 755
Size: 41.4 KB

sonnyman28 · 10-21-2013, 09:39 AM

Nice truck!!

Mr Chevorlet · 10-21-2013, 09:59 AM

Very nice, moving right along.

DGulliver · 10-21-2013, 10:10 AM

Lookin' good!

jhama78 · 10-21-2013, 11:31 AM

Sweet looking ride, where did you find the bullet center caps to fit the stock wheels?

Druman · 10-22-2013, 10:04 AM

Quote:

Originally Posted by jhama78

Sweet looking ride, where did you find the bullet center caps to fit the stock wheels?

Summit P/N gor-hc216bt $28.91 after shipping. Oh and they don't fit I had the same problem that every 6 lug 3.5 bore person had I just made them fit. They are 3.30 bore I cut little relief cuts in the flange and bent them out to 3.5 and trimmed the center bore on the rim a little. I was told that someone on eBay(lug king) or something like that is selling a 3.75 size bore. If you buy those all you will have to do is open the rims bore a little no relief cutting or bending involved. I hope this helps.
Later
DRU

Druman · 10-22-2013, 10:11 AM

thanks for all the awsome feedback guys. heres where i am after rebuilding the front brakes for the second time and replaceing the master cylinder.
Name: 131019_0001.jpg
Views: 647
Size: 33.5 KB

Name: 131019_0001.jpg
Views: 647
Size: 33.5 KB

Name: 131019_0007.jpg
Views: 641
Size: 28.5 KB

Name: imagesCABRFHMD.jpg
Views: 647
Size: 35.1 KB

Name: 131019_0005.jpg
Views: 648
Size: 30.7 KB

Druman · 10-22-2013, 10:23 AM

oh and by the pics you see i replaced my stock shocks with what i was told was i three inch drop shock from CPP, but as you can tell by the pic also is that there is only a 1 1/4 defrance bettween the two as far as travel. Name: 131019_0004.jpg
Views: 625
Size: 47.7 KB

Name: 131019_0004.jpg
Views: 625
Size: 47.7 KB

07-22-2013, 08:56 AM	#26
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread after removing all the paint and one inch of bondo. i found out that someone put a 68 fender on the rt side. __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096 Last edited by Druman; 07-22-2013 at 09:01 AM.

07-29-2013, 03:30 PM	#27
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread finally finished the grill, covered it in a little pistachio. __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

07-29-2013, 08:05 PM	#28
Bow Commander Registered User Join Date: Sep 2012 Location: Springfield Oregon Posts: 156	Re: 1967 GMC C1500 SS 4.1L build thread Looking great! It's come a long way! Posted via Mobile Device

07-29-2013, 09:56 PM	#29
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Looking good! I live about 15 miles from Salem. Kudos for sticking with the 6 banger. The racing stripe on the valve cover makes it look surprisingly peppy! Just an observation here - so don't take it personal - but I'd lose that rear bumper! JMO... __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

08-05-2013, 12:35 PM	#32
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread bumper installed and bed painted. __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

09-09-2013, 01:58 PM	#33
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread finally installed my C-notch and center caps. __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

09-09-2013, 02:07 PM	#34
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

09-14-2013, 09:38 AM	#35
zammer Addicted user Join Date: Sep 2009 Location: Edmonton, Alberta Posts: 370	Re: 1967 GMC C1500 SS 4.1L build thread looks good in sucha short period, good job! __________________ 1972 2wd Blazer - 95% completed 2015 Silverado 1500 4wd -z 2008 AERO 9-7X (TBSS cousin) LS2 1970 Jimmy 4wd - future project

09-24-2013, 08:44 AM	#37
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread working on getting the front rubber and brakes referb. __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

09-24-2013, 10:13 AM	#38
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	Re: 1967 GMC C1500 SS 4.1L build thread Nice work. I like the 6cyl but also like the red better. Just my preference.

09-30-2013, 12:04 PM	#39
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread right side done on to the left. __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

10-15-2013, 10:01 AM	#40
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread well after all that work of replacing all brake components I started bleeding the brakes and found out the wheel cylinders where not remand right the bleeder screw leaked, the line leaked and the old master cylinder leaked all under my dash. Back to the drawing board. Returning all parts to day so I can try a new manufacture. I know what you all are thinking just do a disc brake conversion. Well I am part of the government shutdown so that will have to wait. Drum brake repair for now. __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

10-15-2013, 10:49 AM	#41
trac209 Registered User Join Date: Dec 2011 Location: winnipeg Posts: 1,107	Re: 1967 GMC C1500 SS 4.1L build thread One word for you"wicked". Awesome work

10-15-2013, 03:47 PM	#43
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

10-21-2013, 09:39 AM	#44
sonnyman28 Registered User Join Date: May 2006 Location: Alabama Posts: 46	Re: 1967 GMC C1500 SS 4.1L build thread Nice truck!!



Register or Log In To remove these advertisements.

10-21-2013, 09:59 AM	#45
Mr Chevorlet Rusty Nuts Join Date: Sep 2008 Location: Clever Missouri Posts: 1,338	Re: 1967 GMC C1500 SS 4.1L build thread Very nice, moving right along. __________________ (Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414

10-21-2013, 10:10 AM	#46
DGulliver Registered User Join Date: Jul 2009 Location: Southern TN Posts: 227	Re: 1967 GMC C1500 SS 4.1L build thread Lookin' good! __________________ '72 Chevrolet Step Side 350/TH350, '63 C10 Step V8 '74 Trans Am 400, '80 Trans Am Indy Pace Car Mercedes AMG S55, SLK230 Kompressor, GL450 '96 Dodge Indy Ram Official Indy Truck '99 Porsche 911 Carrera

10-21-2013, 11:31 AM	#47
jhama78 Registered User Join Date: Aug 2004 Location: Eastern Shore VA Posts: 366	Re: 1967 GMC C1500 SS 4.1L build thread Sweet looking ride, where did you find the bullet center caps to fit the stock wheels? __________________ -j-rod '06 3500 LWB CC 4wd, 8.1 Allison

10-22-2013, 10:11 AM	#49
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread thanks for all the awsome feedback guys. heres where i am after rebuilding the front brakes for the second time and replaceing the master cylinder. __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

10-22-2013, 10:23 AM	#50
Druman Registered User Join Date: Jun 2013 Location: Deatsville, AL Posts: 70	Re: 1967 GMC C1500 SS 4.1L build thread oh and by the pics you see i replaced my stock shocks with what i was told was i three inch drop shock from CPP, but as you can tell by the pic also is that there is only a 1 1/4 defrance bettween the two as far as travel. __________________ 67 GMC C1500 SS 4.1L if you get bored ck out my build.http://67-72chevytrucks.com/vboard/showthread.php?t=587096

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.