TN Parting out 77 Silverado - The 1947 - Present Chevrolet & GMC Truck Message Board Network

77c10 · 08-06-2013, 09:10 PM

Bear with me if I do something wrong, this is my 1st time posting in the classified section.

I am parting out this truck or will entertain selling it whole as is. No title!!! A/C truck and it looks like all the components are there. Rust in the bed floor and around the wheel wells and inner fenders and core support under the battery. Interior is not in very good shape. Truck has a 350 4 barrel engine that starts and runs and a 700r4 that has an issue. It will go forward but has no reverse.

Let me know what you are looking for and I will get back with you.

hotrod_991 · 08-06-2013, 11:06 PM

hows the dash look?

77c10 · 08-07-2013, 07:59 AM

Quote:

Originally Posted by hotrod_991

hows the dash look?

I will get a couple pics of it tonight, best I remember it was cracked.

77ChevySharkBite · 08-07-2013, 09:15 AM

What about the rear bumper brackets? Headlight bezels as well?

77c10 · 08-07-2013, 10:53 AM

Quote:

Originally Posted by 77ChevySharkBite

What about the rear bumper brackets? Headlight bezels as well?

How's $50 plus the ride sound for both the brackets and bezels?

77ChevySharkBite · 08-07-2013, 11:09 AM

Quote:

Originally Posted by 77c10

How's $50 plus the ride sound for both the brackets and bezels?

I'll take the brackets for sure, but could you get me some pictures of the bezels or tell me the condition also could you get shipping cost to 77034 zip code.

Rnd · 08-07-2013, 12:58 PM

If the A/C compressor is functional I would be interested

77c10 · 08-07-2013, 01:02 PM

Quote:

Originally Posted by Rnd

If the A/C compressor is functional I would be interested

I honestly have no way to check it. I do know that the clutch spins on it.

77c10 · 08-07-2013, 01:04 PM

Quote:

Originally Posted by 77ChevySharkBite

I'll take the brackets for sure, but could you get me some pictures of the bezels or tell me the condition also could you get shipping cost to 77034 zip code.

I will get you some pics of the bezels after work today. I can tell you while they are not perfect they are better than most I have seen on daily drivers. I assume they are GM originals.

Let me get a weight on the brackets and I will get you a shipping rate.

77ChevySharkBite · 08-07-2013, 01:46 PM

Quote:

Originally Posted by 77c10

I will get you some pics of the bezels after work today. I can tell you while they are not perfect they are better than most I have seen on daily drivers. I assume they are GM originals.

Let me get a weight on the brackets and I will get you a shipping rate.

Okay sounds great man!

77c10 · 08-07-2013, 07:41 PM

Quote:

Originally Posted by 77ChevySharkBite

Okay sounds great man!

Got a couple pics of the bezels. Wanna pm me your e-mail address?
Posted via Mobile Device

79_3+3 · 08-07-2013, 07:54 PM

How do the bumper guards look?

77ChevySharkBite · 08-07-2013, 08:06 PM

Pm sent
Posted via Mobile Device

77c10 · 08-07-2013, 08:19 PM

Quote:

Originally Posted by 79_3+3

How do the bumper guards look?

I will take a couple pics and send them to you. Pm me your e-mail address.
Posted via Mobile Device

77c10 · 08-07-2013, 08:58 PM

Quote:

Originally Posted by 79_3+3

How do the bumper guards look?

One is in very good shape but the chrome is peeling off the other. Will post pics of both shortly.
Posted via Mobile Device

77c10 · 08-07-2013, 08:59 PM

Quote:

Originally Posted by hotrod_991

hows the dash look?

Cracked pretty bad. Can't really get a decent picture of it. I will keep on trying if you want me to.
Posted via Mobile Device

77c10 · 08-08-2013, 09:10 AM

Quote:

Originally Posted by 77c10

One is in very good shape but the chrome is peeling off the other. Will post pics of both shortly.
Posted via Mobile Device

70sarver · 08-08-2013, 10:20 AM

Is the carb a quadrajet, if so can you get me some pics and the numbers off it

Thanks

77c10 · 08-08-2013, 10:54 AM

Quote:

Originally Posted by 70sarver

Is the carb a quadrajet, if so can you get me some pics and the numbers off it

Thanks

Yes it is and yes I will. PM me your e-mail address please.

79_3+3 · 08-08-2013, 11:58 AM

Quote:

Originally Posted by 77c10

Thank you for the pictures, but I'll have to pass on these.

Thanks and have a good one!

Recian · 08-08-2013, 07:18 PM

Can't see pic is too small. What kind of carb is on it?

77c10 · 08-08-2013, 07:55 PM

Quote:

Originally Posted by Recian

Can't see pic is too small. What kind of carb is on it?

It is a quadrajet.
Posted via Mobile Device

Recian · 08-08-2013, 08:14 PM

Does it run good, no fuel leaks or anything crazy?

77c10 · 08-08-2013, 08:37 PM

Runs pretty good.
Posted via Mobile Device

Recian · 08-08-2013, 09:29 PM

I'm kinda new to these trucks but does that one have electric choke? If so I'm interested. How much u want shipped to 28562?
Posted via Mobile Device

08-06-2013, 09:10 PM	#1
77c10 Registered User Join Date: Aug 2011 Location: Gallatin, TN Posts: 782	Parting out 77 Silverado Bear with me if I do something wrong, this is my 1st time posting in the classified section. I am parting out this truck or will entertain selling it whole as is. No title!!! A/C truck and it looks like all the components are there. Rust in the bed floor and around the wheel wells and inner fenders and core support under the battery. Interior is not in very good shape. Truck has a 350 4 barrel engine that starts and runs and a 700r4 that has an issue. It will go forward but has no reverse. Let me know what you are looking for and I will get back with you. __________________ 77 C10, 6.0LS/4L80E, 3:73 12 bolt. Boss 338's 20" x 10" w/ 285/50/20 rear. 20" x 8.5" w/ 245/40/20 front. Vintage Air. Full Autometer gauges recessed in factory bezel (Thanks bigblock73!) Gm Storm Grey Metallic paint "Cool ain't ever cheap and cheap ain't ever cool"

08-06-2013, 11:06 PM	#2
hotrod_991 Registered User Join Date: Jul 2009 Location: Thibodaux, LA Posts: 479	Re: Parting out 77 Silverado hows the dash look? __________________ "Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint

08-07-2013, 09:15 AM	#4
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: Parting out 77 Silverado What about the rear bumper brackets? Headlight bezels as well? __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

08-07-2013, 12:58 PM	#7
Rnd Registered User Join Date: Apr 2013 Location: erie Pa Posts: 34	Re: Parting out 77 Silverado If the A/C compressor is functional I would be interested

08-07-2013, 07:54 PM	#12
79_3+3 Registered User Join Date: Apr 2011 Location: Wyoming, MI Posts: 15	Re: Parting out 77 Silverado How do the bumper guards look? __________________ John 1979 Chevy Scottsdale C20 3+3 2003 Chevy Suburban Z71 2006 Chevy Monte Carlo ~SOLD~

08-07-2013, 08:06 PM	#13
77ChevySharkBite Registered User Join Date: Aug 2012 Location: Houston, Texas Posts: 2,475	Re: Parting out 77 Silverado Pm sent Posted via Mobile Device __________________ Korwin 77 C10 Silverado Sharkbite LWB Build 67 Chevy C10 Frame Off 06 Dodge Magnum 2.7v6 aka swag wag! 2010 Honda Accord 2.4I4 DD aka Liquid Metal

08-08-2013, 10:20 AM	#18
70sarver Registered User Join Date: Mar 2011 Location: Bluefield VA Posts: 152	Re: Parting out 77 Silverado Is the carb a quadrajet, if so can you get me some pics and the numbers off it Thanks

08-08-2013, 07:18 PM	#21
Recian Registered User Join Date: Jul 2013 Location: New Bern Posts: 81	Re: Parting out 77 Silverado Can't see pic is too small. What kind of carb is on it?

08-08-2013, 08:14 PM	#23
Recian Registered User Join Date: Jul 2013 Location: New Bern Posts: 81	Re: Parting out 77 Silverado Does it run good, no fuel leaks or anything crazy?

08-08-2013, 08:37 PM	#24
77c10 Registered User Join Date: Aug 2011 Location: Gallatin, TN Posts: 782	Re: Parting out 77 Silverado Runs pretty good. Posted via Mobile Device __________________ 77 C10, 6.0LS/4L80E, 3:73 12 bolt. Boss 338's 20" x 10" w/ 285/50/20 rear. 20" x 8.5" w/ 245/40/20 front. Vintage Air. Full Autometer gauges recessed in factory bezel (Thanks bigblock73!) Gm Storm Grey Metallic paint "Cool ain't ever cheap and cheap ain't ever cool"

08-08-2013, 09:29 PM	#25
Recian Registered User Join Date: Jul 2013 Location: New Bern Posts: 81	Re: Parting out 77 Silverado I'm kinda new to these trucks but does that one have electric choke? If so I'm interested. How much u want shipped to 28562? Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.