![]() |
![]() |
#1 |
Registered User
Join Date: Nov 2012
Location: DFW, TX
Posts: 298
|
lazy temp gauge
Guys
I have a 71 with temp gauge (not sure if some just came with lights, but i have the gauge) Anyway, i seem to have a lazy temp gauge. meaning that it just starts moving when the temp is 180 ish. This gauge always kinda did this and i thought maybe temp sensor. Well, i just completed my 5.3 4l60 swap and i have a temp sensor in the head from a 98 Camaro (works with the pcm and has a port for a gauge). So watching hptuners, I can calibrate the temp in the pcm with the temp on the gauge. I did ground the sensor wire and the gauge did peg full hot. So i believe the wiring is correct. Maybe the 5.3 doesnt flow coolant till the tstat opens? So do any of you other guys have a gauge that always reads low? thanks! |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2013
Location: billings, mt
Posts: 703
|
Re: lazy temp gauge
mine's in the top of the thermostat housing so no temp until the stat opens up. does the same thing kinda slowly moves off of cold a little ways then hangs there until the stat opens up.
__________________
1969 Chevy C10 2wd stepside longbox |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2010
Location: Upland Ca
Posts: 4,143
|
Re: lazy temp gauge
At normal operating temp my gauge reads just off the cold line.
Posted via Mobile Device
__________________
1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|