Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-05-2013, 09:02 AM | #1 |
Registered User
Join Date: Oct 2012
Location: Sumner, IA
Posts: 213
|
Drop Topping without Lowering
My current project is a 3-window 50 at a somewhat standard height. I've kicked around for my next project a drop topped, lowered, fenderless truck. I got to thinking that maybe I combine the two (garage space is a premium, afterall) and wondered what an open top truck would look at its standard height.
Thoughts? Opinions? Anyone done this before?
__________________
James "Bierkan" Vierkant 1950 3100 on a 1972 C10 Chassis Truck Blog Motorcycle Blog |
09-05-2013, 10:14 AM | #2 |
Registered User
Join Date: Aug 2013
Location: Ruidoso, NM
Posts: 290
|
Re: Drop Topping without Lowering
Just to confirm you mean a convertable top? If so, I saw one on EBAY awhile ago and it sucked. I showed my wife and she didn't like it either.
Now if room is an issue and you want something different, you could angle chop it like my extended cab. |
09-05-2013, 12:20 PM | #3 |
Registered User
Join Date: Oct 2012
Location: Sumner, IA
Posts: 213
|
Re: Drop Topping without Lowering
Yea, convertible without the cloth top and mechanism. No, I want to see the sun and don't like feeling cramped, no chop for me. I'm not that skilled a fabricator, anyway. :-)
__________________
James "Bierkan" Vierkant 1950 3100 on a 1972 C10 Chassis Truck Blog Motorcycle Blog |
09-05-2013, 02:23 PM | #4 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,708
|
Re: Drop Topping without Lowering
Stock height trucks look like the pits minus the top as Alaska Gasser said above.
Somewhere in my pile of photos from before I had digital I have a couple of photos of a truck that was at the Goodguys show at Puyallup several years ago. I'm not sure what they used for suspension but it sat real low and didn't have running board meaning the bottoms of the doors were about five inches off the ground. It had a shortened bed and they had built a convertible style windshield header rather than just cut the sheet metal down above the windshield. it was complete with all four fenders and hood. These cabs weren't designed so you can remove the fenders and have them look presentable like 1936 and earlier cabs can. I've seen one that was half way presentable and that truck had a full hood with custom built hood sides running up to a trimmed down grill that was GMC if I remember right. It didn't spin my wheels but it did look finished when you looked at unlike most of them that you see that have that rat rod " I spent one whole Saturday putting it together and now it's done" look.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-05-2013, 03:06 PM | #5 |
Senior Member
Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,624
|
Re: Drop Topping without Lowering
Here's a few pic's ....
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
09-05-2013, 03:33 PM | #6 |
Registered User
Join Date: Oct 2012
Location: Sumner, IA
Posts: 213
|
Re: Drop Topping without Lowering
Yeah, I was planning on leaving the fenders on this truck. The fenderless idea was on my next project. Lowering this one wouldn't be tough - just like lowering a 1972 C10. However, I'm planning on this being a semi-daily driver and would rather keep the clearance.
Pretty much every truck I've seen with a dropped top has been lowered. It *could* look like a highboy, albeit a very weird highboy.
__________________
James "Bierkan" Vierkant 1950 3100 on a 1972 C10 Chassis Truck Blog Motorcycle Blog |
09-05-2013, 03:34 PM | #7 |
Registered User
Join Date: May 2000
Location: Flin Flon, Manitoba, Canada
Posts: 8,853
|
Re: Drop Topping without Lowering
tough to find one that isn't chopped. If it was me, I'd lean more towards that cool little orange number posted above. That is so damn cool looking!!!
__________________
My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795 |
09-05-2013, 06:50 PM | #8 |
Registered User
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
|
Re: Drop Topping without Lowering
This is the nicest one I've seen!
|
09-05-2013, 07:28 PM | #9 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,708
|
Re: Drop Topping without Lowering
The green one in post 7 and the green one in post 8 both look pretty well thought out.
The one in post 8 is probably the best looking one I have seen that had the top cut off to make an open truck. The header on the top of the windshield actually looks like a convertible windshield header while when you look at the gold one in post 7 it looks like someone did a quickie saw job and didn't plan it very well. Attention to the little details means a bunch in the end.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-05-2013, 07:40 PM | #10 |
Registered User
Join Date: Nov 2011
Location: Claudville Va
Posts: 6
|
Re: Drop Topping without Lowering
The green one in #8 looks like the lift off top is behind it.
|
09-05-2013, 07:48 PM | #11 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,708
|
Re: Drop Topping without Lowering
That it is. I've seen photos of it somewhere with the top on it. I didn't realize that until you pointed out the top.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-05-2013, 07:54 PM | #12 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,708
|
Re: Drop Topping without Lowering
This one was in the 2011 Portland roadster show.
No photos with the top off though.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-05-2013, 10:45 PM | #13 |
Registered User
Join Date: Sep 2011
Location: Golden Valley,MN
Posts: 639
|
Re: Drop Topping without Lowering
The green truck in post 8 is a forum member's.
Check out his build thread, Oldman3 http://67-72chevytrucks.com/vboard/s...d.php?t=459839
__________________
My build http://67-72chevytrucks.com/vboard/s...d.php?t=495795 |
09-06-2013, 04:38 PM | #14 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Drop Topping without Lowering
all the above would look like dog poo without lowering them.
the nice looking ones without running boards are seriously low. the little blue on is a foot lower than stock and has a sectioned cab.
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
09-06-2013, 05:26 PM | #15 |
Registered User
Join Date: Oct 2012
Location: Sumner, IA
Posts: 213
|
Re: Drop Topping without Lowering
Thanks. I'll keep thinking about it. Still leaning toward keeping this one stock-ish appearing and keep these ideas for the next project. This one will be the parts hauler for the next!
__________________
James "Bierkan" Vierkant 1950 3100 on a 1972 C10 Chassis Truck Blog Motorcycle Blog |
09-06-2013, 08:25 PM | #16 |
Registered User
Join Date: Aug 2011
Location: Tucson, AZ
Posts: 917
|
Re: Drop Topping without Lowering
Initally I thought the same as most everyone else but got to thinking. I had a 1970 Blazer back in the day and those tops came completely off. So when it was off, it looked like a convertible truck for the most part and i think it looked pretty good....and it was higher than stock with bigger tires. I don't think the AD lends itself to doing it but the TF could, I think, but it would need a windshield grafted on that was swept back and curved around to take up a little of the door bulk. Ones like on the Olds and Caddy's would work, you'd just have to fine one close enough to the right width so you could use the stock glass. I'd still have to lower it, but I've kicked around the idea some.
|
09-06-2013, 08:51 PM | #17 |
Senior Member
Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,624
|
Re: Drop Topping without Lowering
OR .... you could buy one of these ....
They're in the mid $ 20's now.
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
09-06-2013, 10:54 PM | #18 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,708
|
Re: Drop Topping without Lowering
I've got a cab or what's left of it that one of my buddies cut the roof off to use to repair his cab years ago that has always been on the back burner to build a topless truck out of. I keep thinking an S=10 or G body will show up cheap enough that I can cabbage onto the chassis and set it down on the frame with no risers and no running boards. That would be about ten projects back though.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
09-07-2013, 02:00 PM | #19 |
Registered User
Join Date: Aug 2011
Location: Tucson, AZ
Posts: 917
|
Re: Drop Topping without Lowering
I really liked those things when they first came out until I saw the rear. To me it looks like some guy was on a deadline, spent all his time doing the front 3/4 of it which is pretty retro sweet, then had to finish up late one night so he could turn it in the next morning.
|
09-07-2013, 02:17 PM | #20 | |
Senior Member
Join Date: Aug 2010
Location: Shasta Lake, CA.
Posts: 1,624
|
Re: Drop Topping without Lowering
Quote:
That's why I added the chrome strip on the hood and the spoiler, centered the Corvette emblem with the tail lights and added 5" tail pipe tips on the rear.
__________________
Glen & Jane's Rides ‘57 GMC NAPCO Long Bed V8 4 speed Bought 2008 7 other cars & trucks , 5 trailers '56 Chevy Long Bed I6, 4 speed Bought 1990 Sold 8.22.2020 ’56 GMC Suburban Pickup V8, 4 speed Hydramatic Bought 1996 Sold 10.11.2020 My Other Tinkerings http://67-72chevytrucks.com/vboard/s...75#post8967275 |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|