KY Pressed Steel Model Trucks: 1969 Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**hooverfish** · 09-09-2013, 09:45 PM

I have a set of 4 steel model trucks that I am selling. They are made by KJ and are large, heavy duty trucks. They each represent one of 4 assembly plants: Atlanta, Flint, St Louis, and Fremont Ca. All are dark blue paint.
They are 14 inches long and weigh about 2 - 3 lbs each. Graphics are pad printed (not decals), bumper & correct full size hubcaps are chrome plated steel (not plastic). I am asking $40 each and $12 shipping to lower 48. These are brand new and still in original boxes. Approximate size is 1:18 scale. Also, tailgate opens, rubber tires, etc. I like the little 'C 10' on the front fender.

**DREW67** · 09-09-2013, 09:53 PM

Do they have glass?

**Ironhorse** · 09-09-2013, 09:57 PM

Also interested. As DREW67 asked, do they have glass? VERY interested in the St. Louis truck model if affirmative on glass.

**hooverfish** · 09-09-2013, 10:33 PM

No glass .........

**special-K** · 09-10-2013, 06:00 AM

This is a great offering. These came out in '99 and these four are the only plants produced...this is a complete set for $160! Not bad,as that's what they sold for when available (& not just anywhere). They were hard to find from the get-go. I have a set or I'd be on these. The quality is equal to Tonkas made in the '50s.

Littletony · 09-10-2013, 06:20 AM

I will take them, pm me how you would like to be paid.
Posted via Mobile Device

**hooverfish** · 09-10-2013, 10:16 AM

Quote:

Originally Posted by special-K

This is a great offering. These came out in '99 and these four are the only plants produced...this is a complete set for $160! Mot bad,as that's what they sold for when available (& not just anywhere). They were hard to find from the get-go. I have a set or I'd be on these. The quality is equal to Tonkas made in the '50s.

Special-K, thanks for your comments.

**hooverfish** · 09-10-2013, 10:22 AM

Quote:

Originally Posted by Littletony

I will take them, pm me how you would like to be paid.
Posted via Mobile Device

Littletony, thanks ! But I do have one model truck already promised. You can take your pick of the 3 remaining (if you still want them). I intended the shipping charge of $12 for one truck so I will ship you the 3 trucks you want for $20 total shipping.
So let me know which of the 3 assembly plant trucks you prefer for $140 shipped, if that is acceptable to you I will PM the payment info.

Littletony · 09-10-2013, 10:36 AM

I really would like to have all four so I have the complete set. But I guess I will take the Alt, flint and St. Louis trucks.
Posted via Mobile Device

GobbleStalker · 09-10-2013, 10:46 AM

I would love one if available.

Littletony · 09-10-2013, 04:06 PM

Payment sent
Posted via Mobile Device

**hooverfish** · 09-10-2013, 05:35 PM

Trucks are sold, thanks.

Littletony · 09-13-2013, 05:13 PM

Trucks arrived today sir, they are beautiful. Thank you very much.
Posted via Mobile Device

09-09-2013, 09:45 PM	#1
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,141	Pressed Steel Model Trucks: 1969 Stepside I have a set of 4 steel model trucks that I am selling. They are made by KJ and are large, heavy duty trucks. They each represent one of 4 assembly plants: Atlanta, Flint, St Louis, and Fremont Ca. All are dark blue paint. They are 14 inches long and weigh about 2 - 3 lbs each. Graphics are pad printed (not decals), bumper & correct full size hubcaps are chrome plated steel (not plastic). I am asking $40 each and $12 shipping to lower 48. These are brand new and still in original boxes. Approximate size is 1:18 scale. Also, tailgate opens, rubber tires, etc. I like the little 'C 10' on the front fender. Attached Images __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job"

09-09-2013, 09:53 PM	#2
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,029	Re: Pressed Steel Model Trucks: 1969 Stepside Do they have glass? __________________ DREW67

09-09-2013, 09:57 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,287	Re: Pressed Steel Model Trucks: 1969 Stepside Also interested. As DREW67 asked, do they have glass? VERY interested in the St. Louis truck model if affirmative on glass. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

09-09-2013, 10:33 PM	#4
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,141	Re: Pressed Steel Model Trucks: 1969 Stepside No glass ......... __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job"

09-10-2013, 06:00 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Pressed Steel Model Trucks: 1969 Stepside This is a great offering. These came out in '99 and these four are the only plants produced...this is a complete set for $160! Not bad,as that's what they sold for when available (& not just anywhere). They were hard to find from the get-go. I have a set or I'd be on these. The quality is equal to Tonkas made in the '50s. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 09-10-2013 at 07:39 PM.

09-10-2013, 06:20 AM	#6
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Pressed Steel Model Trucks: 1969 Stepside I will take them, pm me how you would like to be paid. Posted via Mobile Device __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

09-10-2013, 10:36 AM	#9
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Pressed Steel Model Trucks: 1969 Stepside I really would like to have all four so I have the complete set. But I guess I will take the Alt, flint and St. Louis trucks. Posted via Mobile Device __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

09-10-2013, 10:46 AM	#10
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: Pressed Steel Model Trucks: 1969 Stepside I would love one if available. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

09-10-2013, 04:06 PM	#11
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Pressed Steel Model Trucks: 1969 Stepside Payment sent Posted via Mobile Device __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

09-10-2013, 05:35 PM	#12
hooverfish Senior Member Join Date: Oct 2012 Location: Lexington, Ky Posts: 2,141	Re: Pressed Steel Model Trucks: 1969 Stepside Trucks are sold, thanks. __________________ Larry 84 Chevy SWB, "Roy", dark blue orig paint, 6 cyl auto, PS, 88,000 miles. 72 Highlander LWB "Olive" med olive over lt yellow, air, 77,000 miles (sold) "It's a sorry man who can't find his wife a good job"

09-13-2013, 05:13 PM	#13
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Pressed Steel Model Trucks: 1969 Stepside Trucks arrived today sir, they are beautiful. Thank you very much. Posted via Mobile Device __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.