65 gmc rear leaf springs best way to lower it?

[Daking19]

I HAVE A 65 GMC AND IT HAS REAR LEAF SPRINGS. I DONT KNOW IF I WANT TO BAG IT YET, I PUT A SHACKLE DROP ON IT BUT ITS NOT LOW ENOUGH. DOES ANYONE KNOW A BETTER WAY TO LOWER IT. I HAVE SEEN SOME AXLE FLIP KITS BUT EVERYONE WANTS AN ARM AND A LEG TO INSTALL THEM.PLEASE IF ANYONE HAS ANY ADVISE PLEASE LET ME KNOW

[geezer#99]

First off it's not nice to yell on a forum.
Turn your 'caps' off when you're typing!

How many leafs in the spring pack?
You can remove a couple to lower it.

[Daking19]

lol sorry about the caps, i believe we removed the over load springs, i might just have to pony up the cash and intall the flip kit

[newbe351]

Early Classic Enterprises has 4" lowering leafs that will maintain your ride and load capacity. If that's not low enough, you can can put your drop shackles back on for a 6-inch drop, and you still don't have to notch the frame.....

[gimmy 64]

I took off all of the short springs and put on the longer shackle and got a little lower than you but not much. I am also running 275-60 15 tires that are lower profile. if you get the flip kit it might lower it too much. it will lower it 5-6 inches.

[Daking19]

cool ill look into that newbe351, and thats what im afraid of gimmy 64 being to low

[geezer#99]

Don't forget!!
THe lower you go you need to watch your pinion angle.

[Daking19]

yeah ur right geezer thanks