Greg65 build thread

[greg65]

I had a great time talking to Alan and Shannon this past Saturday. Alan had most of the cab primered before I arrived. The Vintage Air is on the way and the oudercoating is delivered. Amazing work as always Alan. Here are a few pictures of the progress.

[greg65]

I also picked up some CPP 3" springs that I bought from Billy. Mabe this will correct the tire to fender gap. Here is how the frame is sitting now. I will post another picture after they are installed.

[likaroc13]

Cab is looking great, & that's a nice looking chassis/drivetrain as well! Should have a nice stance too. What drop do you have for the rear?

[greg65]

Originally Posted by likaroc13

Cab is looking great, & that's a nice looking chassis/drivetrain as well! Should have a nice stance too. What drop do you have for the rear?

It is all from Early Classic Enterprises. The springs are 6" drop with a super trac bar kit and their shock relocate kit. Before the body goes back on I need to install a small c-notch.

[greg65]

I'm a little late getting my pictures posted from Saturday. Alan and I mocked up the a/c system to get all the attachment holes drilled before painting. The vintage air is a very nice piece. As always had a great time talking with Alan.

[greg65]

A couple more

[terryw554]

is there a resaon that A/C box couldn't be mounted higher? just curious

[greg65]

Originally Posted by terryw554

is there a resaon that A/C box couldn't be mounted higher? just curious

I guess it could be mounted higher. We used the supplied template. Vintage Air also supplies a smaller glove box which if the unit is higher this piece could not be used. Also where the lines come through the firewall could be a problem.

[terryw554]

I'm thinking about trying this system in my truck. It measures 20x71/8x9 1/2, by my measurements and the way the outlets and hoses come out of the box I should be able to get it high enough to be completely out of sight maybe. Anyone here have experience with this product?
http://www.restomodair.com/shopprodu...ioning-system/

[Modges'66]

Originally Posted by greg65

A couple more

So, does this make the RH floor vent inoperable?
Do you need to block them off now?
Or, could you mount the entire A/C unit more to the left?

[greg65]

Originally Posted by Modges'66

So, does this make the RH floor vent inoperable?
Do you need to block them off now?
Or, could you mount the entire A/C unit more to the left?

A block off plate is supplied but hopefully the handle can be modified enough to be used. I wish I would have known this before having the vents powder coated.

[Ta2Don]

Just an idea, check out McMurphy's cable mod...
Here's a link
http://67-72chevytrucks.com/vboard/s...487100&page=24

[greg65]

Originally Posted by Ta2Don

Just an idea, check out McMurphy's cable mod...
Here's a link
http://67-72chevytrucks.com/vboard/s...487100&page=24

Thanks I will check it out

[Modges'66]

Originally Posted by greg65

A block off plate is supplied but hopefully the handle can be modified enough to be used. I wish I would have known this before having the vents powder coated.

Hmmm, I was really thinking about buying the sure-fit kit, but now, I think that I may just buy the Gen IV universal kit & build my own mounts...I just totally rebuilt my vents too!
Good to know!

[greg65]

Not a lot going on with the truck lately. Between life catching up with me and Alan hunting for the perp that kidnapped Uncle Si. Alan did send me a picture after the glide coat was applied yesterday. I did pick up another piece of wall art at a show this weekend. I've always wanted a black California tag. This one is a 1963. Maybe I can find a '65 in better condition later.

[Ta2Don]

Know all about life catching up! Progress is Progress!

[greg65]

Originally Posted by Ta2Don

Know all about life catching up! Progress is Progress!

Thanks Don.

[Alan's Classic]

My new job has really put a kink in truck progress.

[greg65]

Originally Posted by Alan's Classic

My new job has really put a kink in truck progress.

You are doing great Alan. Make that big money, mine can wait. Congrats on your trophy. I sure you had a smile from ear to ear. Well deserved.

[chad64chevy]

greg cab is looking really good, wont be long and you will see some color on it! alan will do a great job, I just wish I could paint half as good as he can!! ill have to pay someone to paint mine, but i'll try and do the epoxy and bodywork or atleast try!!

[greg65]

Originally Posted by chad64chevy

greg cab is looking really good, wont be long and you will see some color on it! alan will do a great job, I just wish I could paint half as good as he can!! ill have to pay someone to paint mine, but i'll try and do the epoxy and bodywork or atleast try!!

Thanks Chad. I took auto body in high school twenty years ago but would not want to attempt getting my truck ready for paint. Good luck with your repairs . I'm sure it will look amazing when you get done with it.

[diver]

hello,i am new to board and live in dallas ga. my build is 67 4x4 step k-2o short box. who did your soda blasting? thanks butch

[greg65]

Originally Posted by diver

hello,i am new to board and live in dallas ga. my build is 67 4x4 step k-2o short box. who did your soda blasting? thanks butch

It was a guy in Carrollton but I can not find his business card. I had heard so bad things about the soda blasting so we had the cab blasted again.
Some people have problems with paint lifting off of a surface that has been soda blasted.

[greg65]

My truck has been put on the back burner until after our relocation is complete. I brought it home from Alan's Saturday. This will also give me a chance to get some things completed. I'm so pleased with all the work Alan has done on the cab. Hopefully we can get started back on it this summer. Here are a few pictures of where it sits now.

[TJ's Chevy]

Looks perfectly drivable the way it is! You have free cooling, and a cold air intake as well!