KS 1 1/8 Factory sway bar - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 10-14-2013, 07:30 PM

It will need new rubber bushings, missing the to back clamps. You can order bushings and clamps in one package $65 shipped

teeitup · 10-19-2013, 11:05 PM

ttt

Superdrag67 · 10-20-2013, 02:34 AM

Will you do $55 shipped? Thanks.

teeitup · 10-20-2013, 08:34 AM

No sorry, Thanks

ls1nova71 · 10-20-2013, 12:28 PM

Hey Randy, I'd be interested in this. I still need the trailing arm crossmember and some other small frame parts. When would be a good time to come out and get them?

teeitup · 10-21-2013, 07:36 AM

Eric, the trailing arm crossmember I had off was bad, I forgot I cut the brackets on it. I have this one off that blue truck still, I need to get it cut down yet, I might have time this coming weekend to get to it, I've had alot of kids stuff going on lately. Thanks Randy

ls1nova71 · 10-21-2013, 08:49 AM

Has that frame been cut at all? I also need the dimpled parts where the emergency brake cables go through the frame to weld into mine. I could just buy the whole frame from the e brake dimples back .

teeitup · 10-21-2013, 01:19 PM

I'll look at it better Tues when I get home

ksucatz · 10-22-2013, 04:15 PM

Next in line for the sway bar....I could pick up.

ls1nova71 · 10-23-2013, 07:18 PM

Hey Randy, did you get a chance to look at that frame? I have a cordless sawzall, and could cut it myself if that helps.

teeitup · 10-23-2013, 09:35 PM

Brent, Eric has spoken for it, sorry

Eric, this frame is not the best, I'll get some pics Thurs after work

Thanks Randy

ls1nova71 · 10-23-2013, 10:13 PM

Thanks Randy, pics would be great. If the crossmember isn't that good, could I buy it anyway so I can get the work done on my frame, then when you get a good one swap you out? Seems like everybody parting these trucks around here has already cut up the frames and scrapped them so I'm at a stand still until I can get some parts to work with.

ksucatz · 10-23-2013, 10:32 PM

No problem. Guess I will have to wait for the next one.

teeitup · 10-24-2013, 06:32 PM

Eric, I will cutting this blue frame right by front shocks, and its bad from 7 foot back, so you can have the good section, you can see where the trailing arm crossmember is rusted but its still solid. I have the very rear crossmember from that other frame I told you about. I still haven't got the blue trucks frame cut up yet, my back is ailing again so I've been taking it easy. Thanks Randy

jhama78 · 10-25-2013, 12:34 PM

This thing still available?

teeitup · 10-25-2013, 02:15 PM

Sorry its been sold to Eric, Thanks Randy

jhama78 · 10-25-2013, 02:35 PM

10-4, Thanks for the response. I was directed your way in my WTB thread. Have a good weekend!

ls1nova71 · 10-26-2013, 10:28 AM

Hey Randy, I got the crossmembers yesterday at the junk yard . All I need now are the two pieces of the frame where the park brake cables go through it. If you can just cut them out and put them with the sway bar, might just have you ship it all if it isn't too much more to save me the trip. Let me know how much it will be and send me your address and I can get a money order in the mail. Thanks, Eric.

teeitup · 10-26-2013, 07:00 PM

jhama78, I will watch for you one, you have a great weekend too!!

Eric, I'm going to try to work on this frame Sun morn, I can cut the those pieces out for you no problem

Thanks Randy

teeitup · 10-28-2013, 08:08 PM

Eric, are these what you needing

ls1nova71 · 10-28-2013, 08:41 PM

Yes Randy, that's what I need. Send me your address and I'll send the money order. Thanks.

10-14-2013, 07:30 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	1 1/8 Factory sway bar It will need new rubber bushings, missing the to back clamps. You can order bushings and clamps in one package $65 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-19-2013, 11:05 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1 1/8 Factory sway bar ttt __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-20-2013, 02:34 AM	#3
Superdrag67 Registered User Join Date: Jun 2013 Location: Az Posts: 87	Re: 1 1/8 Factory sway bar Will you do $55 shipped? Thanks.

10-20-2013, 08:34 AM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1 1/8 Factory sway bar No sorry, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-20-2013, 12:28 PM	#5
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 1 1/8 Factory sway bar Hey Randy, I'd be interested in this. I still need the trailing arm crossmember and some other small frame parts. When would be a good time to come out and get them? __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

10-21-2013, 07:36 AM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1 1/8 Factory sway bar Eric, the trailing arm crossmember I had off was bad, I forgot I cut the brackets on it. I have this one off that blue truck still, I need to get it cut down yet, I might have time this coming weekend to get to it, I've had alot of kids stuff going on lately. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-21-2013, 08:49 AM	#7
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 1 1/8 Factory sway bar Has that frame been cut at all? I also need the dimpled parts where the emergency brake cables go through the frame to weld into mine. I could just buy the whole frame from the e brake dimples back . __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

10-21-2013, 01:19 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1 1/8 Factory sway bar I'll look at it better Tues when I get home __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-22-2013, 04:15 PM	#9
ksucatz Suppose to be workin........ Join Date: Jul 2001 Location: Shawnee, KS USA Posts: 164	Re: 1 1/8 Factory sway bar Next in line for the sway bar....I could pick up. __________________ Brent '68 C10 '70 C10 '72 LeMans "03 Trailblazer "Stupidity is like a skill, some are born with it and some develop it over a period of time."" Author unknown

10-23-2013, 07:18 PM	#10
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 1 1/8 Factory sway bar Hey Randy, did you get a chance to look at that frame? I have a cordless sawzall, and could cut it myself if that helps. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

10-23-2013, 09:35 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1 1/8 Factory sway bar Brent, Eric has spoken for it, sorry Eric, this frame is not the best, I'll get some pics Thurs after work Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-23-2013, 10:13 PM	#12
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 1 1/8 Factory sway bar Thanks Randy, pics would be great. If the crossmember isn't that good, could I buy it anyway so I can get the work done on my frame, then when you get a good one swap you out? Seems like everybody parting these trucks around here has already cut up the frames and scrapped them so I'm at a stand still until I can get some parts to work with. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

10-23-2013, 10:32 PM	#13
ksucatz Suppose to be workin........ Join Date: Jul 2001 Location: Shawnee, KS USA Posts: 164	Re: 1 1/8 Factory sway bar No problem. Guess I will have to wait for the next one. __________________ Brent '68 C10 '70 C10 '72 LeMans "03 Trailblazer "Stupidity is like a skill, some are born with it and some develop it over a period of time."" Author unknown

10-24-2013, 06:32 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1 1/8 Factory sway bar Eric, I will cutting this blue frame right by front shocks, and its bad from 7 foot back, so you can have the good section, you can see where the trailing arm crossmember is rusted but its still solid. I have the very rear crossmember from that other frame I told you about. I still haven't got the blue trucks frame cut up yet, my back is ailing again so I've been taking it easy. Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-25-2013, 12:34 PM	#15
jhama78 Registered User Join Date: Aug 2004 Location: Eastern Shore VA Posts: 366	Re: 1 1/8 Factory sway bar This thing still available? __________________ -j-rod '06 3500 LWB CC 4wd, 8.1 Allison



Register or Log In To remove these advertisements.

10-25-2013, 02:15 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1 1/8 Factory sway bar Sorry its been sold to Eric, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-25-2013, 02:35 PM	#17
jhama78 Registered User Join Date: Aug 2004 Location: Eastern Shore VA Posts: 366	Re: 1 1/8 Factory sway bar 10-4, Thanks for the response. I was directed your way in my WTB thread. Have a good weekend! __________________ -j-rod '06 3500 LWB CC 4wd, 8.1 Allison

10-26-2013, 10:28 AM	#18
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 1 1/8 Factory sway bar Hey Randy, I got the crossmembers yesterday at the junk yard . All I need now are the two pieces of the frame where the park brake cables go through it. If you can just cut them out and put them with the sway bar, might just have you ship it all if it isn't too much more to save me the trip. Let me know how much it will be and send me your address and I can get a money order in the mail. Thanks, Eric. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

10-26-2013, 07:00 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1 1/8 Factory sway bar jhama78, I will watch for you one, you have a great weekend too!! Eric, I'm going to try to work on this frame Sun morn, I can cut the those pieces out for you no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-28-2013, 08:08 PM	#20
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1 1/8 Factory sway bar Eric, are these what you needing Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-28-2013, 08:41 PM	#21
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 1 1/8 Factory sway bar Yes Randy, that's what I need. Send me your address and I'll send the money order. Thanks. __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.