KS 72 gmc with a Big block getting parted now - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-02-2013, 04:49 PM

Charles, I have this booster setup off a 71 C20, its unknown working condition

teeitup · 11-02-2013, 04:50 PM

AC control

bluek5 · 11-02-2013, 06:34 PM

Randy,
Would you still have the rear section of driveline out of this truck? I am switching my truck from a Eaton HO52 to a Dana 60. I think that the Dana is going to need a shorter driveline. If you do have one how much shipped to 84043?
Thanks, Paul

teeitup · 11-02-2013, 06:35 PM

Paul, sorry its sold already, Thanks Randy

knomadd · 11-03-2013, 08:35 PM

Hey Randy, I just wanted to let you know I found a steering column clamp, so no need to save the next one. Thanks for considering it for me though. I'm sure I'll be asking you for something else in the future.

**Mr Banshee** · 11-05-2013, 03:52 PM

Hey Randy,

Any chance you may have for a driver side bucket seat tracks the spring and retainer that go on the track lock along with the rod that operates the both to release and lock the tracks?

Thanks again,

Mike

faribran · 11-05-2013, 04:51 PM

Randy how much are you asking for the A/C control ?

**TBONE1964** · 11-05-2013, 05:55 PM

Hey Randy,

I got a big box of clusters and parts delivered here today. Thank you very much.

Take care,
Tom

teeitup · 11-05-2013, 07:09 PM

Duane, wish I could of helped you out, Thanks

Mike, sorry none right now

faribran, the one in previous pics is sold, I have this one, it has new lever installed but needs to be adjusted so it slides better

Tom, glad it all got there safely, Thanks as always

Thanks Randy

Temple of Torque · 01-04-2014, 01:23 AM

Are the engine stands, mounts and clamshells still available?

teeitup · 01-05-2014, 03:07 PM

sorry they have been sold, Thanks Randy

11-02-2013, 04:49 PM	#251
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc with a Big block getting parted now Charles, I have this booster setup off a 71 C20, its unknown working condition Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-02-2013, 04:50 PM	#252
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc with a Big block getting parted now AC control Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-02-2013, 06:34 PM	#253
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 72 gmc with a Big block getting parted now Randy, Would you still have the rear section of driveline out of this truck? I am switching my truck from a Eaton HO52 to a Dana 60. I think that the Dana is going to need a shorter driveline. If you do have one how much shipped to 84043? Thanks, Paul

11-02-2013, 06:35 PM	#254
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc with a Big block getting parted now Paul, sorry its sold already, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-03-2013, 08:35 PM	#255
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: 72 gmc with a Big block getting parted now Hey Randy, I just wanted to let you know I found a steering column clamp, so no need to save the next one. Thanks for considering it for me though. I'm sure I'll be asking you for something else in the future. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

11-05-2013, 03:52 PM	#256
Mr Banshee Senior Member Join Date: Jan 2013 Location: Warren, Michigan Posts: 223	Re: 72 gmc with a Big block getting parted now Hey Randy, Any chance you may have for a driver side bucket seat tracks the spring and retainer that go on the track lock along with the rod that operates the both to release and lock the tracks? Thanks again, Mike

11-05-2013, 04:51 PM	#257
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 72 gmc with a Big block getting parted now Randy how much are you asking for the A/C control ? __________________ "

11-05-2013, 05:55 PM	#258
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: 72 gmc with a Big block getting parted now Hey Randy, I got a big box of clusters and parts delivered here today. Thank you very much. Take care, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

11-05-2013, 07:09 PM	#259
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc with a Big block getting parted now Duane, wish I could of helped you out, Thanks Mike, sorry none right now faribran, the one in previous pics is sold, I have this one, it has new lever installed but needs to be adjusted so it slides better Tom, glad it all got there safely, Thanks as always Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-04-2014, 01:23 AM	#260
Temple of Torque Registered User Join Date: Dec 2013 Location: Calgary Posts: 20	Re: 72 gmc with a Big block getting parted now Are the engine stands, mounts and clamshells still available?

01-05-2014, 03:07 PM	#261
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 72 gmc with a Big block getting parted now sorry they have been sold, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.