Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-06-2013, 08:08 PM | #1 |
Registered User
Join Date: Feb 2013
Location: Aransas Pass, Texas
Posts: 66
|
70 c10 Headlights Problem
Hope someone can help me figure this out. Recently, my right passenger side headlight stopped working. I bought a replacement bulb and installed it, but it only works on low beam. The high beam won't work. The left bulb continues work on both settings. I checked the new bulb, and it's designed for both low and high beam settings. I read some earlier threads on here about similar situations, and some said the problem might be the floor mounted headlight dimmer switch. Mine definitely has its issues. Sometimes, when shifting between low and high beams, the lights go out altogether, and the red high beam indicator light on the dash doesn't show. Perhaps that's it.
Any thoughts appreciated. Thanks! Ol' Blue 1970
__________________
Ol' Blue 1970 aka The Blue Widow 1970 Chevy C10 350v8 - 700r4 - 3.73 rear differential http://67-72chevytrucks.com/vboard/s...d.php?t=566713 |
12-06-2013, 08:13 PM | #2 |
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,131
|
Re: 70 c10 Headlights Problem
Check the ground at the light. if it were the switch both low or high would be out. Also check that the new bulb is good. put it in the other side. Then replace the dimmer because it should never turn off the lights.
|
12-07-2013, 05:02 PM | #3 |
Registered User
Join Date: Sep 2009
Location: South of HoustonTX.
Posts: 148
|
Re: 70 c10 Headlights Problem
dimmer switch first, sounds like its bad..
check connections on the hi beam wire to the pass light, see if it has voltage.. never hurts to check/clean grounds.. add a relay> http://madelectrical.com/electricalt...adlights.shtml
__________________
JJ 71 SWB 360 Th400 4.56 |
Bookmarks |
Tags |
70 c10, dimmer switch, headlights, high beam, won't work |
Thread Tools | |
Display Modes | |
|
|