Door Window Seals - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lanman1972 · 12-13-2013, 07:53 PM

I am sure it is on here but I have not found it. How big a job is replacing window seals on the doors? I want to replace before the doors rust out. Thanks

**leddzepp** · 12-13-2013, 07:59 PM

I've always used a flat blade screwdriver to carefully pry the clips back and pop them out...with the window down of course

Buy your new seals from Classicheartbeat or GMCPaul, as they carry ones that will actually seal the glass and prevent water from running down inside the door .

**Grumpy old man** · 12-13-2013, 08:05 PM

Quote:

Originally Posted by leddzepp

I've always used a flat blade screwdriver to carefully pry the clips back and pop them out...with the window down of course

Buy your new seals from Classicheartbeat or GMCPaul, as they carry ones that will actually seal the glass and prevent water from running down inside the door .

steelerubber.com for any gasket or seal for cars and trucks from 1912 to 2013 nobody better they make all the replacement seals for all the speed shops and resellers LARGE FREE CATALOGS COVERING ANY MAKE AND MODEL EVER MADE !

**leddzepp** · 12-13-2013, 08:17 PM

I've used Precision brand for everything and they all fit like a glove. GMCPaul and Classicheartbeat carry them.

Wes is actually having a sale right now: http://67-72chevytrucks.com/vboard/s...d.php?t=607668

So is Kyle (Screaminchevypickup) : http://67-72chevytrucks.com/vboard/s...d.php?t=604683

**zicc1835** · 12-13-2013, 08:20 PM

heres one how http://67-72chevytrucks.com/vboard/s...d.php?t=460960

**zicc1835** · 12-13-2013, 08:49 PM

and another http://67-72chevytrucks.com/vboard/s...d.php?t=602083

**LockDoc** · 12-13-2013, 10:05 PM

-
If you want the VERY best make sure the vendor sells the "Original" Repops brand window seals. Made in the USA. Read this thread:

http://67-72chevytrucks.com/vboard//...d.php?t=493227

Read the whole thread, but be sure and pay special attention to Post #19 by Tim....

LockDoc

**leddzepp** · 12-13-2013, 11:54 PM

Quote:

Originally Posted by LockDoc

-
If you want the VERY best make sure the vendor sells the "Original" Repops brand window seals. Made in the USA. Read this thread:

http://67-72chevytrucks.com/vboard//...d.php?t=493227

Read the whole thread, but be sure and pay special attention to Post #19 by Tim....

LockDoc

Also take a look at post 23 from GMCPaul.

12-13-2013, 07:59 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,022	Re: Door Window Seals I've always used a flat blade screwdriver to carefully pry the clips back and pop them out...with the window down of course Buy your new seals from Classicheartbeat or GMCPaul, as they carry ones that will actually seal the glass and prevent water from running down inside the door . __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

12-13-2013, 08:17 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,022	Re: Door Window Seals I've used Precision brand for everything and they all fit like a glove. GMCPaul and Classicheartbeat carry them. Wes is actually having a sale right now: http://67-72chevytrucks.com/vboard/s...d.php?t=607668 So is Kyle (Screaminchevypickup) : http://67-72chevytrucks.com/vboard/s...d.php?t=604683 __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul Last edited by leddzepp; 12-13-2013 at 08:39 PM.

12-13-2013, 08:20 PM	#5
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,252	Re: Door Window Seals heres one how http://67-72chevytrucks.com/vboard/s...d.php?t=460960 __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

12-13-2013, 08:49 PM	#6
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,252	Re: Door Window Seals and another http://67-72chevytrucks.com/vboard/s...d.php?t=602083 __________________ Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557 Last edited by zicc1835; 12-13-2013 at 08:51 PM. Reason: edit

12-13-2013, 10:05 PM	#7
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,648	Re: Door Window Seals - If you want the VERY best make sure the vendor sells the "Original" Repops brand window seals. Made in the USA. Read this thread: http://67-72chevytrucks.com/vboard//...d.php?t=493227 Read the whole thread, but be sure and pay special attention to Post #19 by Tim.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 06-23-2014 at 05:32 PM.

12-13-2013, 07:53 PM	#1
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Door Window Seals I am sure it is on here but I have not found it. How big a job is replacing window seals on the doors? I want to replace before the doors rust out. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.