FS: Holley 600cfm vac. sec. Elec. choke, 1460 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Destructo · 12-17-2003, 01:00 AM

am putting a Q-Jet on my 4x4 for better mileage and to help cure the fuel slosh problem with off-roading and my holley, I won't be needing this holley anymore so its up for grabs. It is not very old and is the polished model although its not so shiny anymore but could be polished back up with a little elbow grease . Also included for an extra 15 bucks is the special bracket need for the throttle and TV cable for a 700r4 transmission to line up properly with the throttle linkage. This bracket bolts up with the back drive side corner bolt so no matter hot big a spacer your running everything will still line up. As the title says this is a 600cfm vacuum secondary carb with electric choke, model 1460 and it is new enough to have the power valve blow-out protection. Ran perfect on my truck, no problems what so-ever, and the engine in my truck is a 350, started right up no problems in the morning.

125 bucks plus ride plus 10 bucks if you want the 700r4 bracket (will work for TH350 also). I have been using the bracket with my 700r4 for over 2k miles and has allowed the transmission to shift perfectly. The brackets are also available at Advance Autos, just ask for the holley book and its in there.

Pictures are available, give me your email and i'll send them to you. PM me, email me, or post here with any questions.

Also open to trades for wheels and or tires (35x12.5x15's) need 15x8 6 lug wheels, will take stock truck ralley wheels if you have all the peices.

Destructo · 12-31-2003, 12:48 AM

125 with bracket+ride, its a good deal! You know you want it!

Destructo · 01-03-2004, 01:10 AM

bump, still for sale, offers?

dinnut · 01-03-2004, 02:30 AM

pmed you... i would also want pics... forgot to ask for them

70short/step · 01-03-2004, 03:19 AM

Do you take PayPal or just a money order?? Like a pic first, But I am interested in it. Thanks, Short/Step

Destructo · 01-03-2004, 03:24 AM

Visit here for some pics, this site won't let me attach as big of a file, so i'll just send you there to see the pics.

http://www.nc4x4.com/messageboard/in...;threadid=5029

70short/step · 01-03-2004, 03:34 AM

Yeah if Dinnut doesnt want it I would like it. He did ask first. So let me know and how you want payment. Thanks Short/Step

dinnut · 01-03-2004, 03:45 AM

sold! i pmed you again destructo

Destructo · 01-03-2004, 03:53 AM

Sold to Dinnut.... well pending anyway.

70short/step · 01-03-2004, 03:55 AM

If it doesnt work out with him Let me know. Still Interested in it. Thanks 70Short/Step

Destructo · 01-03-2004, 04:07 AM

Will do, he sounds like he really wants it though so I don't think you have much of a chance :p But ya never know, i'll let ya know if something doesn't happen.

dinnut · 01-27-2004, 01:33 AM

i got it today. looks great. will take pics tomorrow....
and thanks for the smooth transaction.

12-17-2003, 01:00 AM	#1
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	FS: Holley 600cfm vac. sec. Elec. choke, 1460 am putting a Q-Jet on my 4x4 for better mileage and to help cure the fuel slosh problem with off-roading and my holley, I won't be needing this holley anymore so its up for grabs. It is not very old and is the polished model although its not so shiny anymore but could be polished back up with a little elbow grease . Also included for an extra 15 bucks is the special bracket need for the throttle and TV cable for a 700r4 transmission to line up properly with the throttle linkage. This bracket bolts up with the back drive side corner bolt so no matter hot big a spacer your running everything will still line up. As the title says this is a 600cfm vacuum secondary carb with electric choke, model 1460 and it is new enough to have the power valve blow-out protection. Ran perfect on my truck, no problems what so-ever, and the engine in my truck is a 350, started right up no problems in the morning. 125 bucks plus ride plus 10 bucks if you want the 700r4 bracket (will work for TH350 also). I have been using the bracket with my 700r4 for over 2k miles and has allowed the transmission to shift perfectly. The brackets are also available at Advance Autos, just ask for the holley book and its in there. Pictures are available, give me your email and i'll send them to you. PM me, email me, or post here with any questions. Also open to trades for wheels and or tires (35x12.5x15's) need 15x8 6 lug wheels, will take stock truck ralley wheels if you have all the peices.

01-03-2004, 02:30 AM	#4
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	pmed you... i would also want pics... forgot to ask for them __________________ 70 longbed 496/th400/Ford 9"

01-03-2004, 03:45 AM	#8
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	sold! i pmed you again destructo __________________ 70 longbed 496/th400/Ford 9"

01-27-2004, 01:33 AM	#12
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	i got it today. looks great. will take pics tomorrow.... and thanks for the smooth transaction. __________________ 70 longbed 496/th400/Ford 9" Last edited by dinnut; 01-27-2004 at 01:36 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-31-2003, 12:48 AM	#2
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	125 with bracket+ride, its a good deal! You know you want it!

01-03-2004, 01:10 AM	#3
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	bump, still for sale, offers?

01-03-2004, 03:19 AM	#5
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Do you take PayPal or just a money order?? Like a pic first, But I am interested in it. Thanks, Short/Step

01-03-2004, 03:24 AM	#6
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Visit here for some pics, this site won't let me attach as big of a file, so i'll just send you there to see the pics. http://www.nc4x4.com/messageboard/in...;threadid=5029

01-03-2004, 03:34 AM	#7
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Yeah if Dinnut doesnt want it I would like it. He did ask first. So let me know and how you want payment. Thanks Short/Step

01-03-2004, 03:53 AM	#9
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Sold to Dinnut.... well pending anyway.

01-03-2004, 03:55 AM	#10
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	If it doesnt work out with him Let me know. Still Interested in it. Thanks 70Short/Step

01-03-2004, 04:07 AM	#11
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Will do, he sounds like he really wants it though so I don't think you have much of a chance :p But ya never know, i'll let ya know if something doesn't happen.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.