The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-14-2014, 08:58 PM   #1
DADS1971
Registered User
 
DADS1971's Avatar
 
Join Date: Apr 2010
Location: Ponchatoula,La.
Posts: 16
top to bed seal surface

Don't remember if I ever introduced myself. I am from chalmette, La. now living in Ponchatoula, La., thanks to Hurricane Katrina. I have been lurking on this great site for a while, and have learned alot from all of ya'll. A few years ago my cousin gave me my Dads 1971 2wd blazer. After about 30 years of begging for it back. I have been working on it off and on and have now come to the part where I need to fit the top onto the bed. I need some help. I have new top seals from LMC and I cannot figure out how they are installed. First off, my top to bed sealing flange has been modified. I was told that there should be a groove in the sealing flange of the top. Mine has been filled in as was told by my cousin. Can someone show me a picture of what this surface should look like? Also, I cannot tell how the seal should be attached to the top. My seal was ordered for a double wall, which I have. It has a flap on one end and a 90 degree bend on the other end. This bend has a slot in it that appears to be used for something. Sorry, for the long? intro?.. But , I need some direction with this problem,Thanks ahead time.
DADS1971 is offline   Reply With Quote
Old 01-16-2014, 12:42 PM   #2
DADS1971
Registered User
 
DADS1971's Avatar
 
Join Date: Apr 2010
Location: Ponchatoula,La.
Posts: 16
Re: top to bed seal surface

I may have figured out the seal, but I could use a picture of the roof to bed seal surface of a double wall top. Also a picture of the b and c post area. The
way I was told the seal is installed seems to be a little short, but without some
pictures I may be wrong. Thanks, again..
DADS1971 is offline   Reply With Quote
Old 01-16-2014, 09:29 PM   #3
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
Re: top to bed seal surface

Hey DADS1971 ...

to the forums and from Ohio.

on getting your Blazer back.

Don't forget we luv pictures
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!
70cst is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com