1969 Short Wide - Page 60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SeTx67 · 01-16-2014, 12:55 PM

30 pages down and 30 to go. Great work on the chassis. I'm to the point where you're on the 14th cab I believe

. I'll try to get caught up in the next day or so

mcbassin · 01-16-2014, 01:42 PM

Quote:

Originally Posted by Zoomin

Those did turn out nice. I like the sheen they have.

Thanks Steve. I like it too, I wish it was just a little bit more shiny but I think it will work better than trying to match clear coats with a flattening agent.

Quote:

Originally Posted by sduckworth13

Sandblasted and painted parts look great Mike.

thanks Scott

Quote:

Originally Posted by Dieselwrencher

Great work Mike! Colors mean progress.

Great work on your son's truck too!

Thanks Ryan, glad to have him back on the road too.

Quote:

Originally Posted by Bennett68C10

Nice work Mike, where did you pick the Medallion Hot Rod Black up at and what did it cost you if you don't mind me asking.

Thanks Keith. I purchased directly from Rubber Seal. LINK, they put me in touch with their regional sales rep. Price for me was kinda high at $54 and some change for a quart of black, catalyst and delivery. I think on my next project, I'll just buy a gallon. I'm going to order another quart to finish the inner fenders and under side of the hood. It ended up being cheaper than flattener, base coat, and clear coat. Plus it's single stage and no matching.Win/ win

Quote:

Originally Posted by SeTx67

30 pages down and 30 to go. Great work on the chassis. I'm to the point where you're on the 14th cab I believe

. I'll try to get caught up in the next day or so

Thanks for the compliment and checking out the thread. I'm sorry this thread is so long winded. Hope to keep it under 100 pages.....

SeTx67 · 01-17-2014, 01:10 PM

I got caught up this morning and truly impressive is all I can say. I wish I had some of the skills you have. Seeing your chassis has been a bad influence. I'll be picking up a bare frame in the near future for either a future project or redo mine the right way like yours

Bennett68C10 · 01-17-2014, 02:01 PM

Thanks for the info Mike, I figured you would have to order from them direct. I searched around and didn't find anybody that sold it.

mcbassin · 01-17-2014, 05:15 PM

Quote:

Originally Posted by SeTx67

I got caught up this morning and truly impressive is all I can say. I wish I had some of the skills you have. Seeing your chassis has been a bad influence. I'll be picking up a bare frame in the near future for either a future project or redo mine the right way like yours

Thanks again for the compliments. I appreciate it. I did my chassis on the cheap as far as paint and blasting. The blaster I used, sucked (no pun) to say the least. It was a suction type, constantly had clogs and hang ups. I've been using member Crash_Ok's pressure pot style the last year or so. (Thanks Mark). It works 10 times better. As for the paint it was super cheap rustoleum. Basically, if I had it to do over again, I would do it different. Live and learn. I can't wait to drive mine, like you can yours, one of these days.

Quote:

Originally Posted by Bennett68C10

Thanks for the info Mike, I figured you would have to order from them direct. I searched around and didn't find anybody that sold it.

No problem. I looked all over for another place to buy it too. No luck. After I priced the basecoat, clear and flattening agent it seems to be a better deal.

mcbassin · 01-17-2014, 05:17 PM

This is what I have been working on lately:

More pictures soon, of it installed.

SeTx67 · 01-17-2014, 08:02 PM

I wanted to use ls1 fans but still haven't made my mind up on what I'll do it. The bracket you built looks nice. Can't wait to see it installed

Crash_OK · 01-17-2014, 08:04 PM

Quote:

Originally Posted by mcbassin

This is what I have been working on lately:

More pictures soon, of it installed.

Wow.. makes mine look really crude.. Looks really nice.. great looking welds..

**screaminchevypickup** · 01-17-2014, 11:42 PM

Looking good mike..

SamsAutoParts73-87 · 01-18-2014, 12:04 AM

That is super slick!!
-Sam

mcbassin · 01-19-2014, 01:33 PM

Quote:

Originally Posted by SeTx67

I wanted to use ls1 fans but still haven't made my mind up on what I'll do it. The bracket you built looks nice. Can't wait to see it installed

Thanks. I think these fans will work out good.

Quote:

Originally Posted by Crash_OK

Wow.. makes mine look really crude.. Looks really nice.. great looking welds..

Thanks Mark, this bracket was a quick and dirty. I think it will work.

Quote:

Originally Posted by screaminchevypickup

Looking good mike..

Thanks Kyle.

Quote:

Originally Posted by SamsAutoParts73-87

That is super slick!!
-Sam

Thanks Sam.

mcbassin · 01-19-2014, 01:38 PM

Here it is installed:

jasonhall · 01-19-2014, 06:53 PM

Great work!

sduckworth13 · 01-20-2014, 09:58 AM

Mike, nice job on the fan bracket and install. I'd like to run a similar setup on my truck.

Low Elco · 01-20-2014, 11:03 AM

Looks good! Nice that they provide clean open hardpoints to mount that kinda stuff. Nice job x3,482

Bennett68C10 · 01-20-2014, 11:52 AM

Great job on the fan assembly Mike

SeTx67 · 01-20-2014, 12:36 PM

Fans look great

**WIDESIDE72** · 01-20-2014, 02:45 PM

I just went through your whole build last night (only had time to look at pictures, not read it all) and this is going to be an awesome truck! I can't wait to see it finished!

Dean'smeanmachine · 01-20-2014, 07:37 PM

looking real good!
looking forward to more!
sub'd

russgoodman · 01-20-2014, 08:17 PM

Finally got to read through the whole thing Mike, its coming along quite well! Your starting point was similar to mine it looked like. Jumping on board to watch you finish it out.

Russ

mcbassin · 01-21-2014, 09:42 AM

Quote:

Originally Posted by jasonhall

Great work!

Thanks Jason.

Quote:

Originally Posted by sduckworth13

Mike, nice job on the fan bracket and install. I'd like to run a similar setup on my truck.

Thanks

Quote:

Originally Posted by Low Elco

Looks good! Nice that they provide clean open hardpoints to mount that kinda stuff. Nice job x3,482

Thanks. Yeah the top was good to go, the bottom, I used some 1/4" sheet metal screws to secure it to the radiator support. I will add some rubber to isolate when I do final install.

Quote:

Originally Posted by Bennett68C10

Great job on the fan assembly Mike

Thanks Keith.

Quote:

Originally Posted by SeTx67

Fans look great

Thanks

Quote:

Originally Posted by WIDESIDE72

I just went through your whole build last night (only had time to look at pictures, not read it all) and this is going to be an awesome truck! I can't wait to see it finished!

Hey thanks for checking out the thread. Sorry it's so long. I hope to be done soon. Well, you're never really done. but maybe I'll get to drive it this year.

Quote:

Originally Posted by Dean'smeanmachine

looking real good!
looking forward to more!
sub'd

Thanks for checking out my build.

Quote:

Originally Posted by russgoodman

Finally got to read through the whole thing Mike, its coming along quite well! Your starting point was similar to mine it looked like. Jumping on board to watch you finish it out.
Russ

Thanks Russ for stopping by my build. I know it's a long journey. but there is light at the end of the tunnel.

mcbassin · 01-21-2014, 10:14 AM

Busy night in the shop yesterday:

big d's red67 · 01-21-2014, 10:41 AM

Looking good.

knomadd · 01-21-2014, 12:01 PM

What's the name of that primer? It looks like the stuff they used on the Powerblock TV show, Musclecar. I like the look of your progress. Keep it up.

mcbassin · 01-21-2014, 12:16 PM

Quote:

Originally Posted by big d's red67

Looking good.

Thanks!

Quote:

Originally Posted by knomadd

What's the name of that primer? It looks like the stuff they used on the Powerblock TV show, Musclecar. I like the look of your progress. Keep it up.

It's Z-chrome rust defender. LINK It's a sprayable polyester. It builds really good and sands good too. It's kind of expensive though. around $100 a gallon and it doesn't go very far either. I started using it on the bed so, I'm kinda stuck with using it for the rest of it now. I've already used 3 gallons

01-16-2014, 12:55 PM	#1476
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: 1969 Short Wide 30 pages down and 30 to go. Great work on the chassis. I'm to the point where you're on the 14th cab I believe . I'll try to get caught up in the next day or so

01-17-2014, 01:10 PM	#1478
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: 1969 Short Wide I got caught up this morning and truly impressive is all I can say. I wish I had some of the skills you have. Seeing your chassis has been a bad influence. I'll be picking up a bare frame in the near future for either a future project or redo mine the right way like yours

01-17-2014, 02:01 PM	#1479
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1969 Short Wide Thanks for the info Mike, I figured you would have to order from them direct. I searched around and didn't find anybody that sold it. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-17-2014, 05:17 PM	#1481
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide This is what I have been working on lately: More pictures soon, of it installed. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-17-2014, 08:02 PM	#1482
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: 1969 Short Wide I wanted to use ls1 fans but still haven't made my mind up on what I'll do it. The bracket you built looks nice. Can't wait to see it installed

01-17-2014, 11:42 PM	#1484
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 1969 Short Wide Looking good mike.. __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

01-18-2014, 12:04 AM	#1485
SamsAutoParts73-87 Registered User Join Date: Feb 2013 Location: Rome PA Posts: 340	Re: 1969 Short Wide That is super slick!! -Sam __________________ 1987 Chevy R30 CC 454/4spd Work Truck 1979 Chevy K10 SWB 350/4spd/NP205, 1979 Chevy C10 LWB 350/TH350 Project 1981 Chevy K30 350/Th400/NP205 1986 Chevy K30 CUCV 6.2L/TH400/NP208

01-19-2014, 01:38 PM	#1487
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide Here it is installed: __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-19-2014, 06:53 PM	#1488
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: 1969 Short Wide Great work!

01-20-2014, 09:58 AM	#1489
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: 1969 Short Wide Mike, nice job on the fan bracket and install. I'd like to run a similar setup on my truck. __________________ Scott

01-20-2014, 11:03 AM	#1490
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 1969 Short Wide Looks good! Nice that they provide clean open hardpoints to mount that kinda stuff. Nice job x3,482 __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

01-20-2014, 11:52 AM	#1491
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1969 Short Wide Great job on the fan assembly Mike __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-20-2014, 12:36 PM	#1492
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: 1969 Short Wide Fans look great

01-20-2014, 02:45 PM	#1493
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1969 Short Wide I just went through your whole build last night (only had time to look at pictures, not read it all) and this is going to be an awesome truck! I can't wait to see it finished!

01-20-2014, 07:37 PM	#1494
Dean'smeanmachine Registered User Join Date: Sep 2013 Location: Mount Morris,NY Posts: 788	Re: 1969 Short Wide looking real good! looking forward to more! sub'd __________________ Dean 1972 Custom Camper c/20 5.3 LS swap in progress. http://67-72chevytrucks.com/vboard/s...d.php?t=610187 in God we Trust



Register or Log In To remove these advertisements.

01-20-2014, 08:17 PM	#1495
russgoodman Registered User Join Date: Oct 2012 Location: Cache, OK Posts: 458	Re: 1969 Short Wide Finally got to read through the whole thing Mike, its coming along quite well! Your starting point was similar to mine it looked like. Jumping on board to watch you finish it out. Russ __________________ 1969 Chevy C10 SWB Fleet - Build thread > http://67-72chevytrucks.com/vboard/s...d.php?t=593554 2008 GMC Sierra Denali - 6.2L AWD - my daily 2011 Ford Flex Limited - Ecoboost AWD - wife's daily 1987 Buick Regal Turbo T - 63K miles - Strip/Street car 1965 Ford Mustang Coupe - 289, c4, 53K miles

01-21-2014, 10:14 AM	#1497
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide Busy night in the shop yesterday: __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-21-2014, 10:41 AM	#1498
big d's red67 Registered User Join Date: May 2010 Location: Broken Arrow Okla. Posts: 510	Re: 1969 Short Wide Looking good. __________________ 1967 swb 454 cid 700R4 trans SOLD 2006 Chevy Trailblazer SS 2013 Camaro RS convertible the wife's Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=573248

01-21-2014, 12:01 PM	#1499
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: 1969 Short Wide What's the name of that primer? It looks like the stuff they used on the Powerblock TV show, Musclecar. I like the look of your progress. Keep it up. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.