Where can I find a pair of 15x8 6 lug steelies ?

[19673ontree]

Id like to put two 15x8 6 lug steel wheels on the back of my 67 I want to run the stock hubcaps , I looked on summit and wheel vintiques makes them but I dont think they have the bumps for.the hubcaps so I will have to find a pair of original used ones anybody have any for sale let me know I posted a wanted ad in the classified parts board I figure somebody will post on this section and may know where I can find a pair thank's

[leddzepp]

Dog dish caps work with wheel Vintiques steelies, a lot of people run them.

[Lattimer]

Originally Posted by leddzepp

Dog dish caps work with wheel Vintiques steelies, a lot of people run them.

Not on the 6 lug version. Only the 5 lug has the knubs for stock dog dish caps.

[19673ontree]

Originally Posted by leddzepp

Dog dish caps work with wheel Vintiques steelies, a lot of people run them.

The 6 lug ones they make they have a baby moon looking hubcap they sell for them the 67 c10 dog dish caps snap on the outside of the hub portion of the wheel on summit racing website they have a pic and wheels dont look to have the 3 BUMPS that the hubcaps snap on ? But it may be a bad pic ? Anybody out there got a set from them ?????

[19673ontree]

Thats what I thought ,

[19673ontree]

If the diameter of the center portion of the wheel vintique wheels is the same size I could weld on three bumps to make the hubcaps snap on ???

[Lattimer]

Originally Posted by 19673ontree

Thats what I thought ,

I called them up and asked, none of the 6 lugs have the bumps. They feel they won't sell enough of them in a 6 lug to make them. I guess everybody buys smoothies and puts on baby moons on the older 6 lugs.

I spent the last year trying to find a set of 6 lug steelies. Only ones I came across were from a vendor on here, and he had them newly powdercoated white and wanted a heavy price for them. I wanted them black, and I just couldn't spend that much to turn around and re-do them.

I gave up a few weeks ago and bought some rallyes.

[19673ontree]

I may check and see if the wheel vintiques ones are the correct size for.the hubcaps it will be easy to install the 3 bump snaps if they are the correct diameter ,

[lolife99]

The Wheel Vintiques 6-lug wheels is a smoothie wheel.
(solid wheel)
The correct wheel you want is their Series 62 wheel,... which they don't sell in 6-lug.
5-lug only.
These wheels have the nubs for the dog dish hub caps and the 4 small windows in the wheels to match your front wheels.

You need to look at 73-87 4x4 CUCV 15x8 wheels.
A guy just sold 5 here on the board last week.
http://67-72chevytrucks.com/vboard/s...d.php?t=616055

[lolife99]

The wheel Vintiques 12 Series wheel has no windows and the ring is too big for your dog dish hubcap since it takes a small internal clip centercap.
http://www.summitracing.com/parts/wv...0604/overview/

[19673ontree]

That smoothie wheel will work with some minor modification I couls make a set of bumps on that wheel to snap the hubcap onto , but yes the factory gm 15 x 8 ones like you pictured is the ones I want ,

[67_C-30]

PM uncle or Southern Parts. They usually have some of them. I recently picked up some for my '68. You can get them in 5 or 6 lug, but the CUCV ones lolife mentioned are 6 lugs. They come on these:

[67_C-30]

BTW, the ones with 3 bumps sometimes don't have the 4 small slots (or windows) like your front ones do. The are solid. The ones with 4 bumps seem to have always have the slots. The CUCV have 4 bumps instead of 3. There are least 3 different styles of these wheels that I've seen.

[67_C-30]

To clarify, some of the 3 bump wheels have the slots, and some don't. All of the 4 bump wheels I've seen (5 and 6 lug) have had the slots. I have one 3 bump wheel with no slots that has mounting holes for a center cap also. The CUCV 4 bump wheels do not have any center cap mounting holes.

[19673ontree]

With a deeper dished wheel and mine are black I dont mind if they have those little window slots or not ,,,,

[67_C-30]

Originally Posted by 19673ontree

With a deeper dished wheel and mine are black I dont mind if they have those little window slots or not ,,,,

Your factory ones should have the little slots anyway. I talked with uncle a few minutes ago, and he said he didn't have any at the moment. You can still check with Woody (Southern Parts). He had some at one time.

[OARNGESI]

Stockton wheel should be able to make you a set

[special-K]

x2 ^^

But I bet someone will come up with a GM set

[19673ontree]

Lots of good discussion here im gonna hold out for an original gm set but if not I may get the wheel vintiques or have a set made but I bet someone will want my money LOL

[67_C-30]

Originally Posted by 19673ontree

Lots of good discussion here im gonna hold out for an original gm set but if not I may get the wheel vintiques or have a set made but I bet someone will want my money LOL

If you want to run 295's on the rear and look sho-nuff old school, you could sandblast these: -lol

http://www.ebay.com/itm/15x10-Chrome...c0aa9f&vxp=mtr

[OARNGESI]

Originally Posted by 67_C-30

If you want to run 295's on the rear and look sho-nuff old school, you could sandblast these: -lol

http://www.ebay.com/itm/15x10-Chrome...c0aa9f&vxp=mtr

I
Those take the stock caps

[19673ontree]

Just from looking at the pic the wheels vintiques wheel pictured above looks.like the stock cap would fit but it dont have the bumps for the cap to snap if I knew that was the case I would order two of them ,,,, has anybody actually tried to see if a stock cap will fit up on the center of one of those ?

[special-K]

Originally Posted by 67_C-30

If you want to run 295's on the rear and look sho-nuff old school, you could sandblast these: -lol

http://www.ebay.com/itm/15x10-Chrome...c0aa9f&vxp=mtr

That's where I think I'm going,once the truck is done. Should look killer with '65 Pontiac hubcaps!