PUI vs Truck World seat covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Beaumont@ · 03-03-2014, 11:31 PM

I ordered some bucket seat covers for a 1970 c10 through Classicparts. I had them verify the manufacture before buying them. They told me via online chat that their seat covers are made by Truck World. I also have a recorded transcript of them stating this. So I bought them and what do they mail me? PUI covers

Should I just save myself the trouble and just use the PUI covers? Anyone have good/bad results with them?

67_C-30 · 03-04-2014, 12:20 AM

Quote:

Originally Posted by Beaumont@

I ordered some bucket seat covers for a 1970 c10 through Classicparts. I had them verify the manufacture before buying them. They told me via online chat that their seat covers are made by Truck World. I also have a recorded transcript of them stating this. So I bought them and what do they mail me? PUI covers

Should I just save myself the trouble and just use the PUI covers? Anyone have good/bad results with them?

A friend of mine bought a black and red houndtooth PUI seat cover from Classic Parts, and it started splitting at the seam on the driver's side after very few miles. I don't know if that is typical, but this one started coming apart almost immediately.

Beaumont@ · 03-04-2014, 01:36 PM

well that's one vote down for PUI covers

CC69Rat · 03-04-2014, 02:00 PM

Id send them back and get some from Tim here on the board. a.k.a. 'Truckseats'

**jocko** · 03-04-2014, 03:34 PM

what Chad said. I got my Truck World covers from him (one custom cloth houndstooth set and one custom made highlander set) and they were perfect. I'd send em back - if they can exchange for TW, then let em, if not, then give Tim (Truckseats) a holler.

CC69Rat · 03-04-2014, 03:51 PM

My interior guy loves them. He said in 30+ yrs it is some of the best he had ever seen.

**D.PASSMORE** · 03-04-2014, 04:21 PM

I have truck world houndstooth seat covers on my bucket seats and a PUI on my back seat in the Blazer. THe PUI cover is faded and has torn after a few years. The truck word covers are just as nice as the day they were installed.

pickupman · 03-04-2014, 05:49 PM

I have sold and used truck world covers for years with no problems. Highly recommend them

Beaumont@ · 03-04-2014, 07:58 PM

Thanks for the advice everyone. After some resistance Classic Parts finally agreed to take back the PUI covers and send me a set of Truck World covers as well as pay for all the shipping. Unfortunately I will have to wait 2 months plus to get them I am told.

67_C-30 · 03-04-2014, 09:08 PM

Quote:

Originally Posted by Beaumont@

Thanks for the advice everyone. After some resistance Classic Parts finally agreed to take back the PUI covers and send me a set of Truck World covers as well as pay for all the shipping. Unfortunately I will have to wait 2 months plus to get them I am told.

Good to hear. As I said before, I don't know if the cover my buddy got was the exception from PUI, but it was not a good cover. I have PUI vinyl seat covers and door panels in my GTO, and they seem to be well made. The houndstooth material seemed to be thin on the truck seat from them. The vinyl seems to be OK on his, but cloth tore very quickly.

ClemsonChevy · 03-04-2014, 09:41 PM

Quote:

Originally Posted by jocko

what Chad said. I got my Truck World covers from him (one custom cloth houndstooth set and one custom made highlander set) and they were perfect. I'd send em back - if they can exchange for TW, then let em, if not, then give Tim (Truckseats) a holler.

Got pictures of the custom Highlander set? Also how much was the custom set if you don't mind me asking?

**jocko** · 03-04-2014, 10:28 PM

i'll pm you Clemson - here are some pre-assembly pics. They are custom made because nobody makes highlander seat covers with the factory scrollwork - Tim was a huge help. SMS had to be brought into the mix as well to make it happen.

**DeadheadNM** · 03-04-2014, 11:06 PM

Awesome looking covers Jocko! I've been pleased with the bench and bucket covers supplied my member Truckseats (Tim) for my builds...

**Cali72K20** · 03-04-2014, 11:09 PM

What is the average wait time from Tim @ Truckseats?

**DeadheadNM** · 03-04-2014, 11:37 PM

Quote:

Originally Posted by Cali72K20

What is the average wait time from Tim @ Truckseats?

IIRC it took a couple of (2) weeks at most...will depend on what you order I imagine (custom work longer). Shoot him a PM...

**Cali72K20** · 03-04-2014, 11:44 PM

Thank you, I just e-mailed him about an order.

**jocko** · 03-05-2014, 04:33 PM

Yes - wait time is short and sweet for a stock order, and he has plenty. I think my olive custom cloth from Tim was MAYBE 2 weeks - smoothe transaction. The highlander plaid took a long, long time - but this was because nobody made them with scrollwork at the time, and because of other parties involved (SMS), not Tim (they shipped the wrong color initially, etc etc but finally got their act together and I'm sure the highlander plaid WITH scrollwork would be much quicker). Tim was my go between and he was the one that alerted me to the incorrect color shade of parchment BEFORE he assembled them with the plaid (whew) and saved the day. The currently available highlander plaid WITHOUT scrollwork would probably only take a few weeks just like any other available setup.

**Cali72K20** · 03-05-2014, 06:03 PM

Thanks everyone, I do NOT want to put anyone on BLAST here, but it has been sometime (longer than posted above) since I placed an order and I had to email back to find out status, still waiting....

Husker · 03-05-2014, 07:01 PM

I have PUI covers on my Buckets in my truck and I would never buy from them again. I got them before Truckseats got here, next set is going to be from him.
Ron

03-03-2014, 11:31 PM	#1
Beaumont@ Registered User Join Date: Jul 2011 Location: Western Canada Posts: 239	PUI vs Truck World seat covers I ordered some bucket seat covers for a 1970 c10 through Classicparts. I had them verify the manufacture before buying them. They told me via online chat that their seat covers are made by Truck World. I also have a recorded transcript of them stating this. So I bought them and what do they mail me? PUI covers Should I just save myself the trouble and just use the PUI covers? Anyone have good/bad results with them?

03-04-2014, 01:36 PM	#3
Beaumont@ Registered User Join Date: Jul 2011 Location: Western Canada Posts: 239	Re: PUI vs Truck World seat covers well that's one vote down for PUI covers

03-04-2014, 02:00 PM	#4
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: PUI vs Truck World seat covers Id send them back and get some from Tim here on the board. a.k.a. 'Truckseats' __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-04-2014, 03:34 PM	#5
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: PUI vs Truck World seat covers what Chad said. I got my Truck World covers from him (one custom cloth houndstooth set and one custom made highlander set) and they were perfect. I'd send em back - if they can exchange for TW, then let em, if not, then give Tim (Truckseats) a holler.

03-04-2014, 03:51 PM	#6
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: PUI vs Truck World seat covers My interior guy loves them. He said in 30+ yrs it is some of the best he had ever seen. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-04-2014, 04:21 PM	#7
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: PUI vs Truck World seat covers I have truck world houndstooth seat covers on my bucket seats and a PUI on my back seat in the Blazer. THe PUI cover is faded and has torn after a few years. The truck word covers are just as nice as the day they were installed. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

03-04-2014, 05:49 PM	#8
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Re: PUI vs Truck World seat covers I have sold and used truck world covers for years with no problems. Highly recommend them __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

03-04-2014, 07:58 PM	#9
Beaumont@ Registered User Join Date: Jul 2011 Location: Western Canada Posts: 239	Re: PUI vs Truck World seat covers Thanks for the advice everyone. After some resistance Classic Parts finally agreed to take back the PUI covers and send me a set of Truck World covers as well as pay for all the shipping. Unfortunately I will have to wait 2 months plus to get them I am told.

03-04-2014, 10:28 PM	#12
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: PUI vs Truck World seat covers i'll pm you Clemson - here are some pre-assembly pics. They are custom made because nobody makes highlander seat covers with the factory scrollwork - Tim was a huge help. SMS had to be brought into the mix as well to make it happen. Attached Images Last edited by jocko; 03-04-2014 at 10:34 PM.

03-04-2014, 11:06 PM	#13
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: PUI vs Truck World seat covers Awesome looking covers Jocko! I've been pleased with the bench and bucket covers supplied my member Truckseats (Tim) for my builds... __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-04-2014, 11:09 PM	#14
Cali72K20 Senior Member Join Date: Aug 2013 Location: Northern Santa Barbara County, California Posts: 2,706	Re: PUI vs Truck World seat covers What is the average wait time from Tim @ Truckseats?

03-04-2014, 11:44 PM	#16
Cali72K20 Senior Member Join Date: Aug 2013 Location: Northern Santa Barbara County, California Posts: 2,706	Re: PUI vs Truck World seat covers Thank you, I just e-mailed him about an order.

03-05-2014, 04:33 PM	#17
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: PUI vs Truck World seat covers Yes - wait time is short and sweet for a stock order, and he has plenty. I think my olive custom cloth from Tim was MAYBE 2 weeks - smoothe transaction. The highlander plaid took a long, long time - but this was because nobody made them with scrollwork at the time, and because of other parties involved (SMS), not Tim (they shipped the wrong color initially, etc etc but finally got their act together and I'm sure the highlander plaid WITH scrollwork would be much quicker). Tim was my go between and he was the one that alerted me to the incorrect color shade of parchment BEFORE he assembled them with the plaid (whew) and saved the day. The currently available highlander plaid WITHOUT scrollwork would probably only take a few weeks just like any other available setup.

03-05-2014, 06:03 PM	#18
Cali72K20 Senior Member Join Date: Aug 2013 Location: Northern Santa Barbara County, California Posts: 2,706	Re: PUI vs Truck World seat covers Thanks everyone, I do NOT want to put anyone on BLAST here, but it has been sometime (longer than posted above) since I placed an order and I had to email back to find out status, still waiting....

03-05-2014, 07:01 PM	#19
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,212	Re: PUI vs Truck World seat covers I have PUI covers on my Buckets in my truck and I would never buy from them again. I got them before Truckseats got here, next set is going to be from him. Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.