Project: Shiro - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**superflysteiny** · 04-16-2014, 11:06 AM

Looks good Buck I am along for the ride

C10_ustacould · 04-16-2014, 11:30 PM

Quote:

Originally Posted by superflysteiny

Looks good Buck I am along for the ride

Well, we are starting with a rougher canvas than we thought but with the products, advice, and a helping hand from the good folks on this board I am sure we can end up with a pretty sweet ride.

On another note; I wish those Delmo Specials of yours would fit my truck. That is a smokin' deal of some seriously rad wheels!

C10_ustacould · 04-17-2014, 07:33 PM

Going to do a little stretch job to the rear wheel tubs. Need a little more clearance for the new wheels and tires.

ksbrktracer · 04-17-2014, 09:48 PM

I'm doing it to a stepside . I should have started with new tubs, would have been less work

C10_ustacould · 04-17-2014, 10:11 PM

Quote:

Originally Posted by ksbrktracer

I'm doing it to a stepside . I should have started with new tubs, would have been less work

Why, were they beat up? I plan on splitting two sets to make one wide set.

ksbrktracer · 04-17-2014, 10:13 PM

Quote:

Originally Posted by Bucks68

Why, were they beat up?

A little bit , after taking a hammer and dolly to them they will still end up with a skim coat of filler to make them decent. I used 1" of one tub and 5" of another tub to create them. Leaves me 2 big halves to build a pair of wider tubs for a fleet side. Started with 4 tubs. I cut the steside bed wall and they bolt in like factory.

C10_ustacould · 04-17-2014, 10:17 PM

Quote:

Originally Posted by ksbrktracer

A little bit , after taking a hammer and dolly to them they will still end up with a skim coat of filler to make them decent. I used 1" of one tub and 5" of another tub to create them. Leaves me 2 big halves to build a pair of wider tubs for a fleet side. Started with 4 tubs.

Talking with Hart_Rod and leaning his experience mine will also need a skim coat. After that I plan to coat them in bed liner.

ksbrktracer · 04-17-2014, 10:19 PM

More pics ..... Wheel look familiar .....!!!!!

C10_ustacould · 04-17-2014, 11:45 PM

Quote:

Originally Posted by ksbrktracer

More pics ..... Wheel look familiar .....!!!!!

Sweet!

C10_ustacould · 04-19-2014, 08:30 PM

So I spent the day getting my butt kicked by these wheel tubs, I did make some progress. didn't widen the a lot, just 1.5" to give the tires more room. Next time I have some garage time I will figure out how I'm going to handle the bed floor...

After that I will bolt it all together and weld it up.

mcbassin · 04-19-2014, 09:27 PM

Very nice progress on the tubs Buck.

Bennett68C10 · 04-19-2014, 09:40 PM

Nice job on the tubs

Rusbuilt · 04-19-2014, 09:48 PM

Tubs are looking good sir!

C10_ustacould · 04-19-2014, 10:42 PM

Quote:

Originally Posted by mcbassin

Very nice progress on the tubs Buck.

Quote:

Originally Posted by Bennett68C10

Nice job on the tubs

Quote:

Originally Posted by Rusbuilt

Tubs are looking good sir!

Thanks gentlemen, it took a whole day just to get to this point. Going to study on the path for the bed floor, hard way or easy way...

swamp rat · 04-20-2014, 02:09 AM

Lookin good!

**Hart_Rod** · 04-20-2014, 09:02 AM

All of that work for 1.5"?????

C10_ustacould · 04-20-2014, 10:46 AM

You'd be surprised what you can accomplish with an extra 1.5".

C10_ustacould · 04-23-2014, 12:49 AM

Thinking about using this cluster when we do the engine swap.

Rusbuilt · 04-23-2014, 09:39 AM

Those look awesome Buck!

ksbrktracer · 04-23-2014, 10:30 PM

Tubs are looking good.....!

C10_ustacould · 04-23-2014, 11:07 PM

Quote:

Originally Posted by Rusbuilt

Those look awesome Buck!

I like them too... but it will be about balancing the amount of white in the cab so I won't rule out a gauge with a black face.

Quote:

Originally Posted by ksbrktracer

Tubs are looking good.....!

Thanks, the real test will be what they look like when I'm done welding on them.

track70 · 04-24-2014, 02:03 AM

Tubs looks good Buck..Gauges are nice too...One suggestion would be if your keeping the blue interior then i would do white face with blue numbers and needles!

C10_ustacould · 05-04-2014, 02:46 AM

Quote:

Originally Posted by track70

Tubs looks good Buck..Gauges are nice too...One suggestion would be if your keeping the blue interior then i would do white face with blue numbers and needles!

Thanks for the good words and the idea for the gauges, we'll keep it in mind!

Got to work in the garage some today, cut the bed floor and welded up the tubs. Still need to grind the welds and then I think I may have a guy I know pop a mold off of them. If people are interested in buying stretched wheel tubs I may be able to help them out... make it easy for them.

Sorry some of the pics are crappy it was about 0100 when I finished and came in.

C10_ustacould · 05-04-2014, 02:48 AM

more...

duallyjams · 05-04-2014, 08:53 AM

Very subtle bet most people won't even notice.

04-16-2014, 11:06 AM	#326
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Project: Shiro Looks good Buck I am along for the ride __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

04-17-2014, 07:33 PM	#328
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project: Shiro Going to do a little stretch job to the rear wheel tubs. Need a little more clearance for the new wheels and tires. Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

04-17-2014, 09:48 PM	#329
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Project: Shiro I'm doing it to a stepside . I should have started with new tubs, would have been less work Attached Images

04-17-2014, 10:19 PM	#333
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Project: Shiro More pics ..... Wheel look familiar .....!!!!! Attached Images

04-19-2014, 08:30 PM	#335
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project: Shiro So I spent the day getting my butt kicked by these wheel tubs, I did make some progress. didn't widen the a lot, just 1.5" to give the tires more room. Next time I have some garage time I will figure out how I'm going to handle the bed floor... After that I will bolt it all together and weld it up. Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

04-19-2014, 09:27 PM	#336
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project: Shiro Very nice progress on the tubs Buck. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-19-2014, 09:40 PM	#337
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project: Shiro Nice job on the tubs __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

04-19-2014, 09:48 PM	#338
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project: Shiro Tubs are looking good sir! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

04-20-2014, 02:09 AM	#340
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project: Shiro Lookin good! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

04-20-2014, 09:02 AM	#341
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Project: Shiro All of that work for 1.5"????? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-20-2014, 10:46 AM	#342
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project: Shiro You'd be surprised what you can accomplish with an extra 1.5". __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

04-23-2014, 12:49 AM	#343
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project: Shiro Thinking about using this cluster when we do the engine swap. Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

04-23-2014, 09:39 AM	#344
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project: Shiro Those look awesome Buck! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

04-23-2014, 10:30 PM	#345
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: Project: Shiro Tubs are looking good.....!

04-24-2014, 02:03 AM	#347
track70 Registered User Join Date: Jun 2013 Location: Ft. Walton Beach, FL Posts: 70	Re: Project: Shiro Tubs looks good Buck..Gauges are nice too...One suggestion would be if your keeping the blue interior then i would do white face with blue numbers and needles! __________________ *TRACK70 BUILD ->* http://67-72chevytrucks.com/vboard/s...d.php?t=589761 King's Speed Shop



Register or Log In To remove these advertisements.

05-04-2014, 02:48 AM	#349
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project: Shiro more... Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

05-04-2014, 08:53 AM	#350
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Project: Shiro Very subtle bet most people won't even notice. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.