6" Skyjacker Softride SYSTEM - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redneck_motorsports · 01-04-2004, 01:29 PM

Front and rear 6" Skyjacker soft ride springs w/steering knuckle arm. Took this off my 67 K20 to go bigger. This lift will also fit other applications but would have to measure springs on you application to confirm. Front springs need bushings but other than that this kit is in very good condition. I am asking $600 OBO. I'm in Texas 79065 area.

Thanks,
Catfish

Scrub · 01-04-2004, 02:08 PM

Hey Catfish,

What are you calling a steering knuckle arm? The pitman arm that goes on the steering box or the steering arm on the axle? Is it a drop arm?

good luck

redneck_motorsports · 01-04-2004, 04:10 PM

Quote:

Originally posted by Scrub
Hey Catfish,

What are you calling a steering knuckle arm? The pitman arm that goes on the steering box or the steering arm on the axle? Is it a drop arm?

good luck

The one that bolts to the axle. It came with the kit to correct the steering geometry. This enables you to use your stock draglink and pitman arm.

Catfish

Scrub · 01-04-2004, 04:35 PM

I guess Pitman arm and Draglink and steering arm mean explict things to some people, I always get confused as to which end they hook up to.

So what axle does it fit? I assume a dana 44

Thanks and good luck

redneck_motorsports · 01-04-2004, 04:39 PM

D44 is correct.

01-04-2004, 01:29 PM	#1
redneck_motorsports Registered User Join Date: Dec 2003 Location: Pampa Texas Posts: 36	6" Skyjacker Softride SYSTEM Front and rear 6" Skyjacker soft ride springs w/steering knuckle arm. Took this off my 67 K20 to go bigger. This lift will also fit other applications but would have to measure springs on you application to confirm. Front springs need bushings but other than that this kit is in very good condition. I am asking $600 OBO. I'm in Texas 79065 area. Thanks, Catfish

01-04-2004, 02:08 PM	#2
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	Hey Catfish, What are you calling a steering knuckle arm? The pitman arm that goes on the steering box or the steering arm on the axle? Is it a drop arm? good luck __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

01-04-2004, 04:35 PM	#4
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	I guess Pitman arm and Draglink and steering arm mean explict things to some people, I always get confused as to which end they hook up to. So what axle does it fit? I assume a dana 44 Thanks and good luck __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

01-04-2004, 04:39 PM	#5
redneck_motorsports Registered User Join Date: Dec 2003 Location: Pampa Texas Posts: 36	D44 is correct. __________________ I have alot of stuff, some of it is here

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.