![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2005
Location: KS
Posts: 65
|
1967 Chevrolet c10 V8 Headers
Which headers on the market are the best for a 1967 C10 327 Automatic trans? Would like something ceramic coated and with the ball flange. Don't seem to have good luck with the seal on a regular flange. FYI this is for a customer that wants headers. I am not a fan myself.
Any help is appreciated. Thanks |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2013
Location: Winnipeg
Posts: 14
|
Re: 1967 Chevrolet c10 V8 Headers
I put these headman headers in a 71 gmc with a th350 last summer. Fit well no install issues. The ball and socket collector definitely made life easier. I don't look but I am sure you can get these ceramic coated. I also installed this Pypes exhaust system at the same time. Again worked well, pipes only needed a couple shortened. Had to make a couple extra hangers for more solid support. Had to buy 2.5" collector as the one with the headers is 2.25". Other then that, quite an easy install, even doing it on my drive way on my back.
Headers http://www.summitracing.com/parts/hed-69090 Exhaust http://www.summitracing.com/parts/pye-sgt79s |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|