1200.00 gm crate motor? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roadking · 01-05-2004, 01:18 PM

still looking for a motor, has anybody had any experience with this motor, i.e. reliability, performance, warranty. im not looking to make my truck a hotrod, just something dependable that looks stock. (71 swb c10 black and white with 6 banger powerglide)

cdowns · 01-05-2004, 01:33 PM

they're well worth the money with the g.m. warrenty check out your local gm dealer

imdarren · 01-05-2004, 01:39 PM

Thats what I'm planning on putting in my 67 this spring.
Just a plain, ordinary, stock, dependible motor.

Darren

Blue Beard · 01-05-2004, 03:20 PM

I've heard nothing but good results from these units.

Cheaper than having a shop do a rebuild...

OldSkool71 · 01-05-2004, 03:27 PM

When my engine gives it up that is what I plan on doing. Maybe a ZZ4 or something mild not too radical. I don't think you can beat it for the price and quality, imo.

gman · 01-05-2004, 08:07 PM

Definitely agree with everything said above!

1971 Cheyenne · 01-05-2004, 08:35 PM

I have one, it's a GREAT engine. absolutely no complaints with it... I might be gettign rid of it in favor of a midly built 383, but for what it is, it works fantastically...

FRENCHBLUE72 · 01-05-2004, 09:20 PM

I just put one in my blazer about 3 month's ago and I love it!!!

**JIMs70GMC** · 01-05-2004, 09:23 PM

What's the HP rating of the 1200 dollar motor?

**BOSS** · 01-05-2004, 09:50 PM

mine is rated at 265hp,not sure about the tourqe.I put in about 3months ago and love it.Not the screamer but i bought it for reliabilty not power,that is what the 454 is for in the 67..........lol.

dwaite72lnghrn · 01-05-2004, 10:03 PM

That is what I put in my sons 65 impala (283 toasted). When you get it you will need the oil filter adapter, along with all of the other extra's you will be looking at around $2600-2800 dollars because you won't have anything off the 6cycl to put on it. Items harmonic damper, flex plate,starter,fuel pump, water pump, distributor, intake, carb, air cleaner, headers,gaskets and pulleys brackets. Some of the price can be shaved by using the parts board pieces.

**JIMs70GMC** · 01-06-2004, 09:15 AM

Is this 1200 motor p/n 10067353? Scoggin-Dickey has it listed for $1280. The hp is listed @ 249hp and 304ft/lbs torque That's w/ cast iron intake, HEI, q-jet and open headers. For $1970 you can get the above w/ aluminum intake, 625 CFM carter, Mallory HEI distributor makes 265 hp w/ same open headers.

JayDubBlazer · 01-06-2004, 10:31 AM

I have one and like it. I also like it because it also seems fairly inexpensive to get it over 300 hp as well. Some vortec heads and a bit meaner cam you will be set.

**BOSS** · 01-06-2004, 10:40 PM

I got mine from pace performance for $1189,A little over $1400 with delivery.Anyone know the tourqe on these?

GM72K10 · 01-07-2004, 12:06 AM

that's what is in my 72 K10 for 9 years now. No problems. Better yet I bought it and a project truck and parts for only a song, got lucky, only a thousand for everything!

gonebad2 · 01-07-2004, 12:12 AM

I've had a few of them with no complaints. Should fit the bill just fine.

fast_dev · 01-07-2004, 12:21 AM

got one in my 94 s-10, good motor, not a race motor, but does the job nicely.

rn2fine · 01-07-2004, 04:24 AM

Here is a nice site with several GM crate motor options. ALl are new and they can even customize and upgrade various components.

http://www.goautocenter.com/

01-05-2004, 01:18 PM	#1
roadking Registered User Join Date: Nov 2003 Location: kc Posts: 229	1200.00 gm crate motor? still looking for a motor, has anybody had any experience with this motor, i.e. reliability, performance, warranty. im not looking to make my truck a hotrod, just something dependable that looks stock. (71 swb c10 black and white with 6 banger powerglide)

01-05-2004, 01:33 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	they're well worth the money with the g.m. warrenty check out your local gm dealer __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-05-2004, 01:39 PM	#3
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Thats what I'm planning on putting in my 67 this spring. Just a plain, ordinary, stock, dependible motor. Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

01-05-2004, 03:20 PM	#4
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	I've heard nothing but good results from these units. Cheaper than having a shop do a rebuild... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-05-2004, 03:27 PM	#5
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	When my engine gives it up that is what I plan on doing. Maybe a ZZ4 or something mild not too radical. I don't think you can beat it for the price and quality, imo. __________________ -Ron-

01-05-2004, 08:07 PM	#6
gman Registered User Join Date: Nov 2000 Location: Ogden, Utah Posts: 290	Definitely agree with everything said above! __________________ 72 Chevy SWB Custom Deluxe K10, 350/SM465, PS, PB, Fact. Air 2000 Harley...Wide Glide

01-05-2004, 08:35 PM	#7
1971 Cheyenne Registered User Join Date: Nov 2002 Location: Bellevue, WA Posts: 1,480	I have one, it's a GREAT engine. absolutely no complaints with it... I might be gettign rid of it in favor of a midly built 383, but for what it is, it works fantastically... __________________ Brian Pal 1971 Cheyenne 10 454/th400-Undergoing a full frame off resto. 1972 Chevy short/step 2wd, 350/th350 1983 M1009 CUCV Military K5 Blazer 1981 Dodge 1 ton 4x4 dually flatbed

01-05-2004, 09:20 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I just put one in my blazer about 3 month's ago and I love it!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-05-2004, 09:23 PM	#9
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	What's the HP rating of the 1200 dollar motor? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-05-2004, 09:50 PM	#10
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	mine is rated at 265hp,not sure about the tourqe.I put in about 3months ago and love it.Not the screamer but i bought it for reliabilty not power,that is what the 454 is for in the 67..........lol. __________________ Support our site Norwood Survivor

01-05-2004, 10:03 PM	#11
dwaite72lnghrn Registered User Join Date: Jun 2002 Location: central pa Posts: 1,525	That is what I put in my sons 65 impala (283 toasted). When you get it you will need the oil filter adapter, along with all of the other extra's you will be looking at around $2600-2800 dollars because you won't have anything off the 6cycl to put on it. Items harmonic damper, flex plate,starter,fuel pump, water pump, distributor, intake, carb, air cleaner, headers,gaskets and pulleys brackets. Some of the price can be shaved by using the parts board pieces. __________________ 72 longhorn c30 502BB/th400/fact air/4.11rear/ custom camper 72 bug(the better half's) under reconstruction 2009 HHR aqua blue 71 GMC k20 350/sm465 2009 Chevy hd3500 6.6 Victory Red crew cab dually Dave & Jeanne

01-06-2004, 09:15 AM	#12
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Is this 1200 motor p/n 10067353? Scoggin-Dickey has it listed for $1280. The hp is listed @ 249hp and 304ft/lbs torque That's w/ cast iron intake, HEI, q-jet and open headers. For $1970 you can get the above w/ aluminum intake, 625 CFM carter, Mallory HEI distributor makes 265 hp w/ same open headers. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

01-06-2004, 10:31 AM	#13
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,883	I have one and like it. I also like it because it also seems fairly inexpensive to get it over 300 hp as well. Some vortec heads and a bit meaner cam you will be set. __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

01-06-2004, 10:40 PM	#14
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	I got mine from pace performance for $1189,A little over $1400 with delivery.Anyone know the tourqe on these? __________________ Support our site Norwood Survivor

01-07-2004, 12:06 AM	#15
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,483	that's what is in my 72 K10 for 9 years now. No problems. Better yet I bought it and a project truck and parts for only a song, got lucky, only a thousand for everything! __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck



Register or Log In To remove these advertisements.

01-07-2004, 12:12 AM	#16
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	I've had a few of them with no complaints. Should fit the bill just fine. __________________ Your Bought And Sold....I Got Your Soul!

01-07-2004, 12:21 AM	#17
fast_dev Registered User Join Date: Dec 2000 Location: Ringtown,PA Posts: 555	got one in my 94 s-10, good motor, not a race motor, but does the job nicely. __________________ 68 chevy 406 small block, budget drag racer, new best e.t 11.91 @112 67 nova numbers matching 327 4 speed 13.6 @ 102mph 70 longhorn c-30 402/4 speed 70 c-10 swb 402, muncie 4 speed 94 s-10 350/th350 3:73 posi 71 c-20 402/th400 towrig for racetruck. 72 4wd lifted on 35's 72 350/3 speed winter beater

01-07-2004, 04:24 AM	#18
rn2fine Registered User Join Date: Jan 2004 Location: Arizona Posts: 157	GM Crate Motor Site Here is a nice site with several GM crate motor options. ALl are new and they can even customize and upgrade various components. http://www.goautocenter.com/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.