nine foot stepside ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JIMs70GMC** · 05-23-2014, 07:41 PM

What's the wheel base of the 9' stepside? I think it's 133", I just want to be sure. Thanks

SS Tim · 05-23-2014, 07:56 PM

133" wheelbase is correct. Plus it will have four stake pockets on each side. The bed steps are also model specific.

**JIMs70GMC** · 05-23-2014, 09:51 PM

Thanks! Nice truck!

**Steeveedee** · 05-23-2014, 10:17 PM

Quote:

Originally Posted by SS Tim

133" wheelbase is correct. Plus it will have four stake pockets on each side. The bed steps are also model specific.

My neighbor across the street has a '59 Chevy about the same color. Awesome restoration. It's an inline 6 with with no oil filter, three on the tree. The granddad used it for his gardening business; bought it new in 1958. I'd love to buy it for truck use, in spite of the new paint. "Big Orange", my wife wants to keep as a camper. I'd love to knock that rotten shell off it and get a back window in it. I can haul 8' lumber no problem in that long bed.

**special-K** · 05-24-2014, 08:41 AM

These are simply C/30 pickups. Of course they are Stepsides and Fendersides,but until the Longhorn was introduced they were the "only" C/30 pickup,just like all GM pickups prior to '58 (except Cameos and Suburban Carriers). So,in '67 if you said C/30 pickup it automatically meant Stepside.

05-23-2014, 07:41 PM	#1
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	nine foot stepside ? What's the wheel base of the 9' stepside? I think it's 133", I just want to be sure. Thanks __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-23-2014, 07:56 PM	#2
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: nine foot stepside ? 133" wheelbase is correct. Plus it will have four stake pockets on each side. The bed steps are also model specific. Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

05-23-2014, 09:51 PM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Re: nine foot stepside ? Thanks! Nice truck! __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

05-24-2014, 08:41 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: nine foot stepside ? These are simply C/30 pickups. Of course they are Stepsides and Fendersides,but until the Longhorn was introduced they were the "only" C/30 pickup,just like all GM pickups prior to '58 (except Cameos and Suburban Carriers). So,in '67 if you said C/30 pickup it automatically meant Stepside. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.