MN Parting 1971 Ochre C20 Custom Deluxe - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Youey · 06-02-2014, 12:06 PM

Man that stock pedal is so hard to get ahold of, how much for the door panels

amashal · 06-02-2014, 12:24 PM

I'll take the proportioning valve for $20. PM me payment info and I'll send payment today. Thanks.

69-72 · 06-02-2014, 01:33 PM

Quote:

Originally Posted by Vintage Windmills

yep, those and the ones on the a arms included. Its all included except maybe the old bolts if i fight them.

I would also need the brackets that are riveted to the frame as well as the 4 U shaped clamps, not concerned with the rubber or bolts. I am interested as long as shipping isn't more than $35

Vintage Windmills · 06-02-2014, 02:06 PM

Quote:

Originally Posted by serge

Hello,
Interested in passenger side vent door with hardware and knob.
Also battery tray if decent.
Would ship to 44041
Thanks,
Serge

Let me check out tonight. i think the bat tray was good. $59 shipped if rust free. cheaper if it needs any fixing.

Quote:

Originally Posted by Daddy'O

Interested in all - please post pics. Thanks!

sounds good

Quote:

Originally Posted by thefraze_1020

I'll take the cleaner, manifolds, and heat shields. PM me your PayPal.

sending pm

Vintage Windmills · 06-02-2014, 02:10 PM

Quote:

Originally Posted by Youey

Man that stock pedal is so hard to get ahold of, how much for the door panels

i may have one in a cab out back. driver panel was junk, pass side sold local.

Quote:

Originally Posted by amashal

I'll take the proportioning valve for $20. PM me payment info and I'll send payment today. Thanks.

sending pm

Quote:

Originally Posted by 69-72

I would also need the brackets that are riveted to the frame as well as the 4 U shaped clamps, not concerned with the rubber or bolts. I am interested as long as shipping isn't more than $35

i think that will work, let me estimate it on usps site. no problem on the brackets. sounds good on not needing rubber or bolts, i can then use the fire stick to remove

c20pickup · 06-02-2014, 02:17 PM

how is the conditon of the driver side inner fender well? pics?

Vintage Windmills · 06-02-2014, 02:24 PM

Quote:

Originally Posted by c20pickup

how is the conditon of the driver side inner fender well? pics?

I have four of them here, no rust through is 95 picked up, no shipping.

c20pickup · 06-02-2014, 02:35 PM

Quote:

Originally Posted by Vintage Windmills

I have four of them here, no rust through is 95 picked up, no shipping.

darn, the one place i find good fender wells is too far away..

mine isnt in too bad of condition, but id rather start with a good piece and be done with it..

boraxman · 06-02-2014, 03:42 PM

Seat belts available? Decent?

beetle1960 · 06-02-2014, 09:09 PM

would you be willing to pull the bottom seat foam?

Vintage Windmills · 06-03-2014, 12:36 AM

pics of stuff for those who asked:

Vintage Windmills · 06-03-2014, 12:42 AM

Quote:

Originally Posted by c20pickup

darn, the one place i find good fender wells is too far away..

mine isnt in too bad of condition, but id rather start with a good piece and be done with it..

And with those 65 mph interstate speed limits your state has doesn't make it any easier

Quote:

Originally Posted by boraxman

Seat belts available? Decent?

Sold local yesterday.

Quote:

Originally Posted by beetle1960

would you be willing to pull the bottom seat foam?

Theres a pic up a post. It has a groove in it, would need patching

Jake1971 · 06-03-2014, 05:27 PM

I will take the oil filler tube, carburetor, and armrests pending total shipped to 78602. Can you combine with my pile from your other thread?

Vintage Windmills · 06-03-2014, 08:50 PM

Quote:

Originally Posted by Daddy'O

Interested in all - please post pics. Thanks!

Some pics up a couple posts, here is the mirror. You can see in the perimeter of the glass some defects in the background chrome.

69-72 · 06-03-2014, 10:32 PM

Quote:

Originally Posted by Vintage Windmills

i think that will work, let me estimate it on usps site. no problem on the brackets. sounds good on not needing rubber or bolts, i can then use the fire stick to remove

Did you happen to get a total with shipping for the sway bar yet

Daddy'O · 06-04-2014, 03:31 PM

Quote:

Originally Posted by Vintage Windmills

Some pics up a couple posts, here is the mirror. You can see in the perimeter of the glass some defects in the background chrome.

Thanks for the pics. I'll take them all. Please send me a PM for contact info so I can send you a postal MO.

Thanks!

dmartin1 · 06-04-2014, 04:13 PM

i didnt see anything about the gauge cluster?

gauges or lights? condition?

lemme know if available and price thanks man

ZackD1212 · 06-05-2014, 03:09 PM

Cigarette lighter assembly with chrome bezel, door sill plates, and door seals? prices shipped to 62234? condition?

Vintage Windmills · 06-05-2014, 04:02 PM

General Update**, i am getting my arse kicked this week with work and a couple days out of town. Will try to get a few things shipped out before monday but not sure I will be able to.

Quote:

Originally Posted by 69-72

Did you happen to get a total with shipping for the sway bar yet

Looks like $35 shipping to ND.

Quote:

Originally Posted by Daddy'O

Thanks for the pics. I'll take them all. Please send me a PM for contact info so I can send you a postal MO.

Thanks!

sending PM soon

Quote:

Originally Posted by dmartin1

i didnt see anything about the gauge cluster?

gauges or lights? condition?

lemme know if available and price thanks man

Looks pretty nice, not tested. has gauges, no tach, no vac. $60 shipped

Quote:

Originally Posted by ZackD1212

Cigarette lighter assembly with chrome bezel, door sill plates, and door seals? prices shipped to 62234? condition?

just have lighter assembly with harness. $33 shipped with lighter itself and the dash bezel also included.

ZackD1212 · 06-05-2014, 04:05 PM

[QUOTE=just have lighter assembly with harness. $33 shipped with lighter itself and the dash bezel also included.[/QUOTE]

Ill pass, just realized i can get the assembly from lmc for 14.95
Thanks anyway

Vintage Windmills · 06-05-2014, 04:42 PM

Quote:

Originally Posted by ZackD1212

Ill pass, just realized i can get the assembly from lmc for 14.95
Thanks anyway

No worries, good price there if decent quality

CATCHALLBLUE · 06-05-2014, 07:53 PM

Howdy Jud,

Get a chance to look at that pushrod?

Jake1971 · 06-05-2014, 10:14 PM

Hey Jud, what is the number on the carburetor? If it matches mine I will take it as well as the front frame crossmember for the amount specified in your other thread.

Vintage Windmills · 06-06-2014, 12:40 AM

Quote:

Originally Posted by CATCHALLBLUE

Howdy Jud,

Get a chance to look at that pushrod?

Yes, it looks like yours, I will send monday, just cover shipping of $3 or so when you get it assuming it will work for you

Quote:

Originally Posted by Jake1971

Hey Jud, what is the number on the carburetor? If it matches mine I will take it as well as the front frame crossmember for the amount specified in your other thread.

I will look on sunday, wont be free until then. I have other q jets, do you know what numbers are good?

For those of you who have paid up to this point, i will be shipping your stuff monday, thanks everyone for your patience

**ScottH** · 06-06-2014, 09:24 AM

Looking for the fuel line from tank sending unit to under the cab.

Thks
Scott

06-02-2014, 12:06 PM	#26
Youey Registered User Join Date: Oct 2013 Location: New Jersey Posts: 222	Re: Parting 1971 Ochre C20 Custom Deluxe Man that stock pedal is so hard to get ahold of, how much for the door panels

06-02-2014, 12:24 PM	#27
amashal Registered User Join Date: Mar 2008 Location: Allen,TX Posts: 223	Re: Parting 1971 Ochre C20 Custom Deluxe I'll take the proportioning valve for $20. PM me payment info and I'll send payment today. Thanks.

06-02-2014, 02:17 PM	#31
c20pickup Registered User Join Date: Apr 2013 Location: Brighton, WI Posts: 504	Re: Parting 1971 Ochre C20 Custom Deluxe how is the conditon of the driver side inner fender well? pics?

06-02-2014, 03:42 PM	#34
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,920	Re: Parting 1971 Ochre C20 Custom Deluxe Seat belts available? Decent? __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351

06-02-2014, 09:09 PM	#35
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: Parting 1971 Ochre C20 Custom Deluxe would you be willing to pull the bottom seat foam? __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

06-03-2014, 12:36 AM	#36
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 1971 Ochre C20 Custom Deluxe pics of stuff for those who asked: __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

06-03-2014, 05:27 PM	#38
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: Parting 1971 Ochre C20 Custom Deluxe I will take the oil filler tube, carburetor, and armrests pending total shipped to 78602. Can you combine with my pile from your other thread? __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

06-04-2014, 04:13 PM	#42
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: Parting 1971 Ochre C20 Custom Deluxe i didnt see anything about the gauge cluster? gauges or lights? condition? lemme know if available and price thanks man __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

06-05-2014, 03:09 PM	#43
ZackD1212 Registered User Join Date: Feb 2014 Location: Collinsville, IL Posts: 92	Re: Parting 1971 Ochre C20 Custom Deluxe Cigarette lighter assembly with chrome bezel, door sill plates, and door seals? prices shipped to 62234? condition? __________________ Bagged 68 panel 5.3 4L60e 17 Tesla Model S 100D 03 Tahoe

06-05-2014, 04:05 PM	#45
ZackD1212 Registered User Join Date: Feb 2014 Location: Collinsville, IL Posts: 92	Re: Parting 1971 Ochre C20 Custom Deluxe [QUOTE=just have lighter assembly with harness. $33 shipped with lighter itself and the dash bezel also included.[/QUOTE] Ill pass, just realized i can get the assembly from lmc for 14.95 Thanks anyway __________________ Bagged 68 panel 5.3 4L60e 17 Tesla Model S 100D 03 Tahoe Last edited by ZackD1212; 06-05-2014 at 04:21 PM.

06-05-2014, 07:53 PM	#47
CATCHALLBLUE Registered User Join Date: May 2014 Location: Catchall Posts: 120	Re: Parting 1971 Ochre C20 Custom Deluxe Howdy Jud, Get a chance to look at that pushrod?

06-05-2014, 10:14 PM	#48
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: Parting 1971 Ochre C20 Custom Deluxe Hey Jud, what is the number on the carburetor? If it matches mine I will take it as well as the front frame crossmember for the amount specified in your other thread. __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

06-06-2014, 09:24 AM	#50
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Parting 1971 Ochre C20 Custom Deluxe Looking for the fuel line from tank sending unit to under the cab. Thks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.