Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-04-2014, 05:29 PM | #1 |
Newbee
Join Date: Jan 2010
Location: Phoenix, Arizona
Posts: 1,406
|
OOPS! That didn't work.
Monday, I was doing a little walk around on my truck. I noticed the A/C compressor belt was askew. After a bit of inspection, I found the culprit. When I built it, I put the 91 alternator brackets on the pass side. I made a mount for the Compressor on the drivers side. Apparently Sanden compressors do not like being mounted by two ears.
|
06-04-2014, 05:33 PM | #2 |
Newbee
Join Date: Jan 2010
Location: Phoenix, Arizona
Posts: 1,406
|
Re: OOPS! That didn't work.
I had a bracket laying in the yard for the passenger side that uses all 4 ears. So I started over on the whole drive assembly. Alt on the driver side, A/C on the passenger side.
|
06-04-2014, 05:36 PM | #3 |
Newbee
Join Date: Jan 2010
Location: Phoenix, Arizona
Posts: 1,406
|
Re: OOPS! That didn't work.
No more ugly hoses crossing over the motor like this.
|
06-04-2014, 05:39 PM | #4 |
Newbee
Join Date: Jan 2010
Location: Phoenix, Arizona
Posts: 1,406
|
Re: OOPS! That didn't work.
Hopefully I will get it buttoned up this weekend. 23 days until I drive it to Anaheim, for the Brothers show! Why do I do this to myself every single time...
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|