Just getting started on my 67

[67gmcturtle]

I'm just getting going on my build I'll take any advice I can get I'm going with a ls motor I'm wheeling and dealing everyday on parts I've put new felts and rubbers and window regulators so far I got a couple headlight buckets I'm waiting on the adjusting kit so I can get my light all in and working I got my interior all done I'm putting in next weekend I bought a new gas tank also so I've taken the bed off to make that Easyer I still don't really know what I'm doing I'm just winging it

[67gmcturtle]

The bed off

[leftybass209]

Nice start. Best of luck with the ls swap. I don't have any experience with it but make sure to ask your questions here. There's plenty of guys that have done it.

[70blackfish]

I know not all LS motors are the same which one you thinking of using? and you will need the trans and all front brackets, and wiring

[Elliot949]

I have subscribed...

[67gmcturtle]

Originally Posted by 70blackfish

I know not all LS motors are the same which one you thinking of using? and you will need the trans and all front brackets, and wiring

I'm thinking of getting a 5.7 Vortec I've picked up 3 1952 chevy cabs cheap I'm gonna sell and make the money to help fund my build along with a bed and a frame and some fenders and extra glass for the corners and a couple grills and strait axles I got all of it for 350 bucks I hope to make a couple thousand off the deal

[67gmcturtle]

Originally Posted by leftybass209

Nice start. Best of luck with the ls swap. I don't have any experience with it but make sure to ask your questions here. There's plenty of guys that have done it.

Thanks man I've got most of my parts picked out I'm just learning how it all goes togather before I buy anything trying to do it all right and as simple as possible

[Hugh Mongus]

I was at a couple of junk yards in Tulsa this past weekend. They were selling complete engines (you pull it) for $200. You might be able to get a decent deal if you have the ability to pull it and transport it yourself.

[67gmcturtle]

Originally Posted by Hugh Mongus

I was at a couple of junk yards in Tulsa this past weekend. They were selling complete engines (you pull it) for $200. You might be able to get a decent deal if you have the ability to pull it and transport it yourself.

Heck yeah thanks man I just live like fourty minutes from tulsa
I work out around Woodward all week and I'm only home weekends so all the wheeling and dealing I do pretty much has to be done during the weekend