Heater control light problem - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68lwb · 01-11-2004, 10:03 AM

In the process of taking the wiring harness out of my 68, I twisted the holder off the bulb socket for my heater control light. Does anyone know where I can find one new or used? Found out after harness was out I could have unplugged it. I would really like to get the whole piece so I can just plug it in, but could also wire in the new socket if I could find one. Any help would be greatly appreciated

cdowns · 01-11-2004, 12:09 PM

go to a junkyard that has 50's and 60's cars those type of sovkets were used for a long time with out significant change

Blue Beard · 01-11-2004, 12:14 PM

Or try board members.............

GMC Pauls or any of the business people on board.........

Jim68 · 01-11-2004, 02:26 PM

I broke mine too and after looking and asking about used one's for a long time I finally was at autozone in the electrical section and they had one that pushed in and fit perfectly. Cheap too. James

68lwb · 01-11-2004, 09:26 PM

Thanks for the help. I will add to my growing list for GMCPauls.

01-11-2004, 10:03 AM	#1
68lwb Registered User Join Date: Dec 2003 Location: Northern Indiana Posts: 85	Heater control light problem In the process of taking the wiring harness out of my 68, I twisted the holder off the bulb socket for my heater control light. Does anyone know where I can find one new or used? Found out after harness was out I could have unplugged it. I would really like to get the whole piece so I can just plug it in, but could also wire in the new socket if I could find one. Any help would be greatly appreciated

01-11-2004, 12:09 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	go to a junkyard that has 50's and 60's cars those type of sovkets were used for a long time with out significant change __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-11-2004, 12:14 PM	#3
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Or try board members............. GMC Pauls or any of the business people on board......... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-11-2004, 02:26 PM	#4
Jim68 Registered User Join Date: Apr 2000 Location: Mesa, AZ Posts: 135	I broke mine too and after looking and asking about used one's for a long time I finally was at autozone in the electrical section and they had one that pushed in and fit perfectly. Cheap too. James __________________ 68 long fleetside C-10, '74 350, CH465 4-speed, Edelbrock Performer 1406 Carb, Hedman Hedders, 50 Series Flowmasters Mesa, AZ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-11-2004, 09:26 PM	#5
68lwb Registered User Join Date: Dec 2003 Location: Northern Indiana Posts: 85	Thanks for the help. I will add to my growing list for GMCPauls.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.