'70 GMC SWB Money Hole - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 07-08-2014, 04:59 PM

Congrats on the new truck and hope you get what you're asking for your old truck. I'd definitely post it on eBay...that's where the ridiculous prices have been lately for trucks with "patina" You can do a free classifieds with them or pay a bit and have a reserve...

**nlped** · 07-08-2014, 05:06 PM

^^^ I thought about eBay, but I figured I'd try here 1st. I'd like someone who can appreciate all the hard work that's already been done and wants a driver project. I'll give it a couple of days then make that leap.

Thanks

**nlped** · 07-08-2014, 06:22 PM

Some pictures of the driver's side floor pan, rocker and door bottom...

**nlped** · 07-08-2014, 06:27 PM

Passenger side floor pan, rocker and door bottom too...

**nlped** · 07-08-2014, 06:29 PM

interior, showing seat and tilt column

**nlped** · 07-15-2014, 11:28 PM

Well, I got "Walt" today and after talking with the wife... I'm keeping Booger too. I'll be turning Booger into a '67 gmc with all the extra parts I have. I'll be fixing the few rusty spots on the cab, bolting up all the new fenders, core support, hood, grill, bedsides, doors, etc and squirting some paint. I'll be rewiring it too... I have an extra painless harness for Booger.

**nlped** · 07-15-2014, 11:32 PM

Hanging with Booger...Introducing Walt...

shearjs · 07-16-2014, 10:26 AM

Sweet! Now you get to enjoy them both!

**nlped** · 07-17-2014, 08:08 AM

Quote:

Originally Posted by shearjs

Sweet! Now you get to enjoy them both!

That translates into "Mow Money"...

**nlped** · 08-21-2014, 07:03 PM

I did go ahead and buy a set of 15x8" Eagle 111's with grey centers to go on here. I'm hoping the heat here will subside soon so I can get these trucks back on the front burner. 3 project trucks plus the '74 Bronco are a lot of projects for 1 guy

. Okay, pity party are over

**thelonerife** · 08-23-2014, 11:24 AM

Nice.

**nlped** · 09-04-2014, 08:03 PM

Well, I bought a new set of wheels that are a bit more than I'd planned.

22x8.5" & 22x10" Raceline Billet Forged Bullets & tires.

**nlped** · 09-09-2014, 03:35 PM

Just piddling around today and decided to just throw the Racelines on to see how they look...

**nlped** · 12-20-2014, 04:27 PM

Just bought front & rear extreme dropmembers and the PB bolt on body drop brackets. Guess it's gonna be LOW!

**nlped** · 12-22-2014, 09:31 PM

Incoming parts. Whoop whoop

**lolife99** · 12-22-2014, 10:41 PM

Very nice^^^

**nlped** · 12-22-2014, 11:35 PM

Quote:

Originally Posted by lolife99

Very nice^^^

Thanks Keith. I debated on selling it, but damn it... I want a LOW GMC. This should do it.

shearjs · 12-23-2014, 10:52 AM

Quote:

Originally Posted by nlped

Thanks Keith. I debated on selling it, but damn it... I want a LOW GMC. This should do it.

Yep, that should do it! Look forward to seeing it!

**nlped** · 12-23-2014, 01:28 PM

Quote:

Originally Posted by shearjs

Yep, that should do it! Look forward to seeing it!

Me TOO

**nlped** · 12-23-2014, 07:23 PM

Pallet of PB goodies headed my way via Fastenal, including a set of frame rails (there wrapped up separately off to the side)

ECU PIRATE · 12-28-2014, 10:00 AM

You have a good wife there son!!!!! There is no way in hell my wife would let me keep two trucks at once!!! She just bought me a shop sign for Christmas that says" what happens in the garage stays in the garage". I guess that is a big hint to remove all of the truck parts I have stored in our finished basement. Do you think I am going to keep a set of factory bucket seats and factory brackets, in my garage?? I keep all of the good stuff out of public view. If it's seen, there is a good chance she will be after me to sell it!!!! I have an dealer replacement 402 BBC out of a 69-70 Vette that I have stashed under my workbench that no one knows about except my Dad��

sduckworth13 · 12-28-2014, 03:56 PM

Looking good Ed. I've been checking in here and there on your builds, looking forward to seeing you get thing rolling.

**nlped** · 12-28-2014, 05:05 PM

Quote:

Originally Posted by ECU PIRATE

You have a good wife there son!!!!! There is no way in hell my wife would let me keep two trucks at once!!! She just bought me a shop sign for Christmas that says" what happens in the garage stays in the garage". I guess that is a big hint to remove all of the truck parts I have stored in our finished basement. Do you think I am going to keep a set of factory bucket seats and factory brackets, in my garage?? I keep all of the good stuff out of public view. If it's seen, there is a good chance she will be after me to sell it!!!! I have an dealer replacement 402 BBC out of a 69-70 Vette that I have stashed under my workbench that no one knows about except my Dad��

I actually have 4 67-72 trucks

, a 93 Mustang LX convertible, and a 74 Bronco

...

I'd like to have those bucket seats, how can I get in touch with your wife and get that fire lit

Quote:

Originally Posted by sduckworth13

Looking good Ed. I've been checking in here and there on your builds, looking forward to seeing you get thing rolling.

I'm ready to get this thing started too. I'm going to blame the lack of enthusiasm on the weather and abscense of dry work space... I made a step towards rectifying the dry work space today. I have a group coming to pour the footings and foundation for my new shop building here at the house.

sduckworth13 · 12-28-2014, 05:55 PM

Quote:

Originally Posted by nlped

I actually have 4 67-72 trucks

, a 93 Mustang LX convertible, and a 74 Bronco

...

I'd like to have those bucket seats, how can I get in touch with your wife and get that fire lit

I'm ready to get this thing started too. I'm going to blame the lack of enthusiasm on the weather and abscense of dry work space... I made a step towards rectifying the dry work space today. I have a group coming to pour the footings and foundation for my new shop building here at the house.

Cool, that'll definitely be nice to have them in your new shop.

ECU PIRATE · 12-29-2014, 08:10 AM

HAHA...........she saw a picture of them the day I brought them home. I guess she tacitly approves of them (as long as they are not in the house). I will keep my eye on for you if you are in need of a set. I run into them about very two months or so. I found an almost perfect set out of a 72' K5 about (2) months ago for $200. Missed out on them due to some bills that needed to be paid......

Quote:

Originally Posted by nlped

I actually have 4 67-72 trucks

, a 93 Mustang LX convertible, and a 74 Bronco

...

I'd like to have those bucket seats, how can I get in touch with your wife and get that fire lit

I'm ready to get this thing started too. I'm going to blame the lack of enthusiasm on the weather and abscense of dry work space... I made a step towards rectifying the dry work space today. I have a group coming to pour the footings and foundation for my new shop building here at the house.

07-08-2014, 04:59 PM	#201
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: '70 GMC SWB Money Hole Congrats on the new truck and hope you get what you're asking for your old truck. I'd definitely post it on eBay...that's where the ridiculous prices have been lately for trucks with "patina" You can do a free classifieds with them or pay a bit and have a reserve... __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-08-2014, 05:06 PM	#202
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole ^^^ I thought about eBay, but I figured I'd try here 1st. I'd like someone who can appreciate all the hard work that's already been done and wants a driver project. I'll give it a couple of days then make that leap. Thanks __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-08-2014, 06:22 PM	#203
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole Some pictures of the driver's side floor pan, rocker and door bottom... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-08-2014, 06:27 PM	#204
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole Passenger side floor pan, rocker and door bottom too... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-08-2014, 06:29 PM	#205
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole interior, showing seat and tilt column Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-15-2014, 11:28 PM	#206
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole Well, I got "Walt" today and after talking with the wife... I'm keeping Booger too. I'll be turning Booger into a '67 gmc with all the extra parts I have. I'll be fixing the few rusty spots on the cab, bolting up all the new fenders, core support, hood, grill, bedsides, doors, etc and squirting some paint. I'll be rewiring it too... I have an extra painless harness for Booger. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-15-2014, 11:32 PM	#207
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole Hanging with Booger...Introducing Walt... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

07-16-2014, 10:26 AM	#208
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: '70 GMC SWB Money Hole Sweet! Now you get to enjoy them both! __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

08-21-2014, 07:03 PM	#210
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole I did go ahead and buy a set of 15x8" Eagle 111's with grey centers to go on here. I'm hoping the heat here will subside soon so I can get these trucks back on the front burner. 3 project trucks plus the '74 Bronco are a lot of projects for 1 guy . Okay, pity party are over __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-23-2014, 11:24 AM	#211
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: '70 GMC SWB Money Hole Nice. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

09-04-2014, 08:03 PM	#212
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole Well, I bought a new set of wheels that are a bit more than I'd planned. 22x8.5" & 22x10" Raceline Billet Forged Bullets & tires. Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

09-09-2014, 03:35 PM	#213
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole Just piddling around today and decided to just throw the Racelines on to see how they look... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-20-2014, 04:27 PM	#214
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole Just bought front & rear extreme dropmembers and the PB bolt on body drop brackets. Guess it's gonna be LOW! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-22-2014, 09:31 PM	#215
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole Incoming parts. Whoop whoop Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-22-2014, 10:41 PM	#216
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: '70 GMC SWB Money Hole Very nice^^^ __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

12-23-2014, 07:23 PM	#220
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: '70 GMC SWB Money Hole Pallet of PB goodies headed my way via Fastenal, including a set of frame rails (there wrapped up separately off to the side) Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

12-28-2014, 10:00 AM	#221
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: '70 GMC SWB Money Hole You have a good wife there son!!!!! There is no way in hell my wife would let me keep two trucks at once!!! She just bought me a shop sign for Christmas that says" what happens in the garage stays in the garage". I guess that is a big hint to remove all of the truck parts I have stored in our finished basement. Do you think I am going to keep a set of factory bucket seats and factory brackets, in my garage?? I keep all of the good stuff out of public view. If it's seen, there is a good chance she will be after me to sell it!!!! I have an dealer replacement 402 BBC out of a 69-70 Vette that I have stashed under my workbench that no one knows about except my Dad�� __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

12-28-2014, 03:56 PM	#222
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: '70 GMC SWB Money Hole Looking good Ed. I've been checking in here and there on your builds, looking forward to seeing you get thing rolling. __________________ Scott

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.