Wild C10 project - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BossHogg69 · 07-14-2014, 02:55 PM

Quote:

Originally Posted by bruce casilio

Hay guys I was wondering if anyone on here is from Arkansas? If so do u no if there is someone around here that can upholster the dash after I make the 67 dash fit. That way it will match up with the 99 door panels? Thanks for any help

Bruce, I'm not too far away here in Sherwood, I'll ask around and let you know. Awesome build so far.

Brannon - sorry to here about your son, I hope things work out for you and your family.

bruce casilio · 07-14-2014, 03:44 PM

Thanks. I no there is a lot of places in Arkansas that do good interior work. But I work so much I don't have time for much else! Lol

Brannon yazell · 07-15-2014, 09:21 PM

Ok, here's pics of the 400 sbc that was in the original 67' truck I had started with. When I bought the truck the motor and 700R4 trans were fresh rebuilds and ran great. Bruce ended up w it after all the trading, well decided it would look great under the hood of this build w a lil TLC. Going for that old school look.. In these pics it's already ground down, was red..

Brannon yazell · 07-15-2014, 09:24 PM

Here's the MSD EFI setup that I picked up for a real good deal...

Brannon yazell · 07-15-2014, 09:27 PM

1970 z-28 double hump heads....I hate posting these pics cause the motor looks horrible right now. Thinking on going w a gun metal charcoal color on the motor and accents against the black..

Brannon yazell · 07-17-2014, 09:29 PM

Guess nobody likes my 400 sbc idea...this motor was full of torque and pulled hard all the way to bout 5300 rpm. Was a fresh rebuild so really don't want to pull the heads to see if they bored it to a 406, not sure why they wouldn't at that stage. It's a roller motor w a good cam. Plans are to get it painted gun metal grey with the batwing caddi/olds air breather on top to give that nostalgic look...

**Palf70Step** · 07-17-2014, 10:19 PM

I'm sure any engine you guys do will be outta site considering what is going into the body.

BTW, I like those valve covers.

Brannon yazell · 07-17-2014, 11:25 PM

More work on the roof..

Brannon yazell · 07-17-2014, 11:26 PM

..

Brannon yazell · 07-17-2014, 11:27 PM

...

Brannon yazell · 07-17-2014, 11:27 PM

....

Brannon yazell · 07-17-2014, 11:28 PM

.....

Brannon yazell · 07-17-2014, 11:28 PM

......

Brannon yazell · 07-17-2014, 11:29 PM

.......

Brannon yazell · 07-17-2014, 11:30 PM

........

Brannon yazell · 07-17-2014, 11:30 PM

.........

jjzepplin · 07-18-2014, 07:50 AM

Nice work!
I like the 400 idea but then I love tellin people it's a high torque 265ci.
Then I lite the tires with a tap of the gas pedal.
Besides you already have it and you can always upgrade later.
And it would be easy on the budget.
I say use it!
Are you sure it's a 400?
What are the casting #'s?
Oh and most pistons will have the .030 stamped into the top indicating the bore.
If it hasn't been run much it will still be visible through a spark plug hole possibly.

Brannon yazell · 07-18-2014, 08:45 AM

Quote:

Originally Posted by jjzepplin

Nice work!
I like the 400 idea but then I love tellin people it's a high torque 265ci.
Then I lite the tires with a tap of the gas pedal.
Besides you already have it and you can always upgrade later.
And it would be easy on the budget.
I say use it!
Are you sure it's a 400?
What are the casting #'s?
Oh and most pistons will have the .030 stamped into the top indicating the bore.
If it hasn't been run much it will still be visible through a spark plug hole possibly.

Already ran the codes...1975 block

BigDaddyV · 07-18-2014, 09:01 AM

Killer build bud, I'm along for the ride!

jjzepplin · 07-18-2014, 09:13 AM

Quote:

Originally Posted by Brannon yazell

Already ran the codes...1975 block

That's a good block.
Same as mine.
How about the heads?
I used the stock heads but punched them to 2.02's
And had the bowls worked for the new valves.
It has been a very reliable engine.
Of course there was a lot more than that done to it but blah blah.

Brannon yazell · 07-18-2014, 10:16 AM

Quote:

Originally Posted by jjzepplin

That's a good block.
Same as mine.
How about the heads?
I used the stock heads but punched them to 2.02's
And had the bowls worked for the new valves.
It has been a very reliable engine.
Of course there was a lot more than that done to it but blah blah.

Glad to hear...the heads are casting #3927186 69' to 70' Z28 64cc. I haven't measured the valves, probably still stock. I was impressed with it in the 67'

Brannon yazell · 07-18-2014, 03:37 PM

Third brake light is gone...

Brannon yazell · 07-18-2014, 03:38 PM

..

Brannon yazell · 07-18-2014, 03:39 PM

...

Brannon yazell · 07-18-2014, 08:41 PM

And more welding on the roof, then on to the doors.

View Poll Results: Exotic wood bed or skinned smooth?
Wood?	164	78.10%
Metal?	46	21.90%
Voters: 210. You may not vote on this poll

07-14-2014, 03:44 PM	#377
bruce casilio Registered User Join Date: Dec 2008 Location: greenbrier, arkansas Posts: 50	Re: Wild C10 project Thanks. I no there is a lot of places in Arkansas that do good interior work. But I work so much I don't have time for much else! Lol

07-15-2014, 09:21 PM	#378
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project Ok, here's pics of the 400 sbc that was in the original 67' truck I had started with. When I bought the truck the motor and 700R4 trans were fresh rebuilds and ran great. Bruce ended up w it after all the trading, well decided it would look great under the hood of this build w a lil TLC. Going for that old school look.. In these pics it's already ground down, was red.. Attached Images

07-15-2014, 09:24 PM	#379
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project Here's the MSD EFI setup that I picked up for a real good deal... Attached Images

07-15-2014, 09:27 PM	#380
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project 1970 z-28 double hump heads....I hate posting these pics cause the motor looks horrible right now. Thinking on going w a gun metal charcoal color on the motor and accents against the black.. Attached Images

07-17-2014, 09:29 PM	#381
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project Guess nobody likes my 400 sbc idea...this motor was full of torque and pulled hard all the way to bout 5300 rpm. Was a fresh rebuild so really don't want to pull the heads to see if they bored it to a 406, not sure why they wouldn't at that stage. It's a roller motor w a good cam. Plans are to get it painted gun metal grey with the batwing caddi/olds air breather on top to give that nostalgic look... __________________ Brannon Yazell 67' C10 mated w/ a 01' Silverado, extreme custom 2015 Chevy 2500 Z71 LTZ Crew Cab MSA, Motorsports Authority, Rigid Industries, Magnaflow, Michigan Metal Works, Raceline, BASF, Street Trucks http://67-72chevytrucks.com/vboard/s...d.php?t=624964

07-17-2014, 10:19 PM	#382
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Wild C10 project I'm sure any engine you guys do will be outta site considering what is going into the body. BTW, I like those valve covers. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-17-2014, 11:25 PM	#383
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project More work on the roof.. Attached Images

07-17-2014, 11:26 PM	#384
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project .. Attached Images

07-17-2014, 11:27 PM	#385
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project ... Attached Images

07-17-2014, 11:27 PM	#386
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project .... Attached Images

07-17-2014, 11:28 PM	#387
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project ..... Attached Images

07-17-2014, 11:28 PM	#388
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project ...... Attached Images

07-17-2014, 11:29 PM	#389
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project ....... Attached Images

07-17-2014, 11:30 PM	#390
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project ........ Attached Images



Register or Log In To remove these advertisements.

07-17-2014, 11:30 PM	#391
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project ......... Attached Images

07-18-2014, 07:50 AM	#392
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Wild C10 project Nice work! I like the 400 idea but then I love tellin people it's a high torque 265ci. Then I lite the tires with a tap of the gas pedal. Besides you already have it and you can always upgrade later. And it would be easy on the budget. I say use it! Are you sure it's a 400? What are the casting #'s? Oh and most pistons will have the .030 stamped into the top indicating the bore. If it hasn't been run much it will still be visible through a spark plug hole possibly. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

07-18-2014, 09:01 AM	#394
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: Wild C10 project Killer build bud, I'm along for the ride! __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

07-18-2014, 03:37 PM	#397
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project Third brake light is gone... Attached Images

07-18-2014, 03:38 PM	#398
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project .. Attached Images

07-18-2014, 03:39 PM	#399
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project ... Attached Images

07-18-2014, 08:41 PM	#400
Brannon yazell Registered User Join Date: Apr 2014 Location: Greenbrier, ar Posts: 652	Re: Wild C10 project And more welding on the roof, then on to the doors. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.