![]() |
![]() |
#1 |
GM Addicted
Join Date: Jan 2009
Location: Visalia, Ca
Posts: 2,294
|
![]()
Who is everyone using for replacement steel brake lines. I purchased some from right stuff detailing, should be call all wrong stuff. Front steel lines will not seal at all. New proportiong valve also, replaced everything no luck. 3 months down for a brake line leak.
__________________
![]() ![]() 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2012
Location: Des Moines IA
Posts: 1,250
|
Re: Brake lines!
I bought lines, double flare tool, and a bender for under 100 bucks and made my own on my old '86 and made several parts of lines for the '76 and the '74. Took a couple of hours max.
__________________
- 1981 Sierra 454, NV4500 swap - 2006 Z06, 25k miles - 1973 Nova - Project CarNova Virus on Youtube |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2007
Location: Memphis MI
Posts: 1,851
|
Re: Brake lines!
Inline tube. About $200 for full stainless set.
__________________
1987 2 ton ![]() 1982 ![]() Dad's 1981 ![]() Plus a mess o' tractors |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2009
Location: Morrisdale, PA
Posts: 9
|
Re: Brake lines!
I have used Inline Tube as well as the Right Stuff. Both worked great. On my Nova project I bought a flaring tool and bender from NAPA and did the entire job without a leak. Once you learn to do a double flare correctly, it's a breeze.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|