![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: May 2012
Location: Scottsdale, AZ
Posts: 1,910
|
Is steering damper bushing sleeve needed Dana 60
I just put a dana 60 in my K20. There was no steering damper or hardware. I ordered a Skyjacker stabilizer and it came with bushing but no metal sleeve.
Is it supposed to be installed with a sleeve? Thanks, jeff |
![]() |
![]() |
![]() |
#2 |
Too many projects
Join Date: Mar 2004
Location: Fargo, ND land of the flat hills
Posts: 1,147
|
Re: Is steering damper bushing sleeve needed Dana 60
Some have a tight fit of the bushing onto a bolt intended for mounting shocks. That's how my skyjacker stabilizers are.
![]() If the mounting bolt are the same type as the above picture no sleeve is needed.
__________________
Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Mar 2003
Location: Colfax-California
Posts: 8,713
|
Re: Is steering damper bushing sleeve needed Dana 60
You should have gotten the bolt which will fit tight in the bushing, a 1'' spacer, which goes in between the shock and the mount and a stud for the tie rod end of the shock with a castle nut. Pics?
|
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: May 2012
Location: Scottsdale, AZ
Posts: 1,910
|
Re: Is steering damper bushing sleeve needed Dana 60
They sell skyjacker 9000 stabilizer with or without the hardware. I managed to order without the bolts. Now I need to try and buy bolts alone tomorrow. The kicker is they are the same price with or without the hardware.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|