![]() |
![]() |
#1 |
Got Horsepower?
Join Date: Sep 2003
Location: IDAHO
Posts: 406
|
master cylinder leak
my master cylinder is leaking at the back. can i wait a couple months to replace it or do i need to fix it now?
__________________
2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
driving a truck with faulty brakes is a dangerous affair they won't get better only worse and could fail completely at any time REMEMBER THAT WHEN YOU SEE A SCHOOL BUS
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#3 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
One at the parts store will cost less than 20 bucks. Don't be cheap and risk killing somebody's family with bad brakes.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#4 |
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
Buy a new master cylinder.
$20 or less as stated above, and only takes 30 minutes to install. You don't want to drive anywhere with bad brakes. BTW, don't forget to bench bleed the MC. It should have instructions with it.
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg |
![]() |
![]() |
![]() |
#5 |
A-Adam A-Adam
Join Date: Apr 2003
Location: Sarpy Co. Ne. South of Omaha
Posts: 263
|
Fix It!
__________________
70 3/4 ton GMC Camper Special |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2000
Location: Pixley, Ca.
Posts: 486
|
Spend a few more $$ and get a new, not a rebuilt. I had 2 rebuilt ones on my truck....lasted a few years. The new one is still going strong after 5+ years.
__________________
69 C-10 CST Short Fleet, Factory Air, BB427-400 Auto-2400 stall-tilt-cruise-Tach & Vac Gagues, 4/6 drop, power one piece side windows, Eaton posi. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2002
Location: Kentucky
Posts: 107
|
Better fix it now.
|
![]() |
![]() |
![]() |
#8 |
Robert Olson Transport
![]() Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,293
|
ya know this kind of reminds me of that joke thread where the guy had no electricity and called the computer company to find out why his computer wasnt working...... if you really have to ask if you need to fix faulty breaks........
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
![]() |
![]() |
![]() |
#9 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
While it is true that it needs to be replaced, and if you have 20 bucks, I say do it now....but I will go out on a limb and say I have driven a number of vehicles (including my 69 GMC) with the master leaking out the back for up to a year with absolutly no problems at all.
leagal disclaimer...I am in no way shape or form recomending you do this though...but in a pinch.... |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Sep 2003
Location: DFW
Posts: 765
|
If the truck in question is a power brake truck, avoid driving it any longer than needed. If by chance the rear seal is dumping fluid into the booster it will weaken and possibly cause the diaphram in the booster to start leaking, causing lessened assist given by the booster.
and as I tell my customer's, "it's a b!tch when they don't go,,,,,,But it's a mother when they won't stop!" ........................."but it's your children, your life, and your decision"
__________________
The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself? |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2003
Location: Washington State
Posts: 8,834
|
You can do it all in a day..............better not delay........
__________________
1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo |
![]() |
![]() |
![]() |
#12 |
Got Horsepower?
Join Date: Sep 2003
Location: IDAHO
Posts: 406
|
where can i buy a good new master cylinder for $20? will a stock one work alright when i add rear disc brakes?
__________________
2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers |
![]() |
![]() |
![]() |
#13 |
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
auto zone...
http://www1.autozone.com/servlet/UiB...n=viewHomePage you will need a ajustable pro-valve... just a thought...thats what i had to do to my 85 with wilwood rear disc... ![]() |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Apr 2003
Location: missouri city, tx
Posts: 4,486
|
mine cost 17 bucks at autozone. i say that you should replace while they still work!
__________________
70 longbed 496/th400/Ford 9" |
![]() |
![]() |
![]() |
#15 |
Got Horsepower?
Join Date: Sep 2003
Location: IDAHO
Posts: 406
|
i'll replace it as soon as i can
__________________
2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|