OR 100's of misc parts from the last 6 trucks parted out

[TBONE1964]

Originally Posted by engairuph

When you talk to him see when he will send my parts? Already paid and need them like last week.
Thanks

PM sent on behalf of tll74 (Tom)

[engairuph]

Thanks, and tell him good hunting. Ralph

[tll74]

back from my annual elk hunting trip and now catching up.

Originally Posted by Senorx

Looking for a Quadrajet carb stud and Wingnut like this or close to it. For a 71 SBC 350 with original 4 barrel Quadrajet.

8.00 shipped

Originally Posted by suville

Got a pair of 6 cyl engine stands? Zip 83647 Thanks for your time

250 or 292?

Originally Posted by 69SCSS

You have any of those ashtrays left? I need a dark green one, looks like the bottom one in your first pic. If so, shipping to 98661?
Thanks, Al

6.00 shipping

Originally Posted by pimpston65

is the 67-68 teal armrest still for sale? if so i'll take it

I think so. 7.50 shipping

Originally Posted by 68Bowtie4x4

Do you have any chrome heater control panels non-A/C that all the levers are good on?

Please let me know ASAP.

Thanks.

45.00 and 10.00 shipping

Thanks, Tom

[markmdz]

In need of a few parts for my '68 C20:

Gas Pedal
Dash pad (preferably black)
Gauge Cluster
Taillight Harness
Headlight Harness
Chrome headlight bezel
Hood "CHEVROLET" letters (are these stick on, or is there a post that goes into the hood)

I'm sure the list will grow as I go through this truck. It's a new addition to me, so I have yet to really dig into it.

[Chevy Schadow]

I need a Blazer fuel tube cover and a blue seat belt (female side).

[Blazerback72]

I need outside right door handle
2 inside door handles
2 window crank handles
Please let me know if u still have thanks !

[67chevy4x4c]

Do you have ebrake cable from brake pedal to the brake shoes ? And how much shipped to Bartley w va 24813

[TexasLS1]

Any chance you have a factory Flywheel/Torque Converter Dust Cover for a TH350 Transmission?

[tll74]

Originally Posted by markmdz

In need of a few parts for my '68 C20:

Gas Pedal
Dash pad (preferably black)
Gauge Cluster
Taillight Harness
Headlight Harness
Chrome headlight bezel
Hood "CHEVROLET" letters (are these stick on, or is there a post that goes into the hood)

I'm sure the list will grow as I go through this truck. It's a new addition to me, so I have yet to really dig into it.

Gas Pedal 10.00 std 15.00 deluxe
Dash pad (preferably black) no pads right now
Gauge Cluster "take out" cluster with gauges 50.00
Taillight Harness from cab to bumper 15.00
Headlight Harness...40.00
Chrome headlight bezel....15.00 each
Hood "CHEVROLET" letters....25.00 for set theses bolt on.

Originally Posted by Chevy Schadow

I need a Blazer fuel tube cover and a blue seat belt (female side).

Sorry, I don't have.

Originally Posted by Blazerback72

I need outside right door handle
2 inside door handles
2 window crank handles
Please let me know if u still have thanks !

Yes
RH out side...15.00 DQ.
door and window handles 7.50 each

Originally Posted by 67chevy4x4c

Do you have ebrake cable from brake pedal to the brake shoes ? And how much shipped to Bartley w va 24813

Year? 2wd or 4x4? Short or long box? K10 or K20?

Originally Posted by TexasLS1

Any chance you have a factory Flywheel/Torque Converter Dust Cover for a TH350 Transmission?

Sorry, nothing. These seem to be always gone or broken.

Thanks, Tom

[TexasLS1]

Originally Posted by tll74

Sorry, nothing. These seem to be always gone or broken.

Thanks, Tom

Ok thanks for looking for me!

[markmdz]

Originally Posted by tll74

Gas Pedal 10.00 std 15.00 deluxe
Dash pad (preferably black) no pads right now
Gauge Cluster "take out" cluster with gauges 50.00
Taillight Harness from cab to bumper 15.00
Headlight Harness...40.00
Chrome headlight bezel....15.00 each
Hood "CHEVROLET" letters....25.00 for set theses bolt on.

Thanks for the reply.

I like the gas pedal.
On the fence with the cluster, but leaning toward yes.
Taillight harness, I'll know more tomorrow afternoon after I get the chance to check it out.
Headlight harness, I just finished going through it after pulling it off the truck. Good news: the headlight harness is all good. Again, I'll know more tomorrow, but I'm seriously hoping I fixed the issues. If not, I may need the cabin harness.
Chrome bezels, I also like these.
Pass on the hood badge, as I don't want to drill any new holes and it's smooth right now.

[yellowGT]

I need a set of taillight lenses with the backup lenses as well. If you have any please let me know.

Also I need some trim pieces from a 72 chevy. I could send you a picture so you know what I'm talking about but they are the thick side molding with the wood grain in the middle.

[54blackhornet]

Tom you in LaGrande tomorrow ? If so bring parts ok...

[BigRed76]

Would you happen to have a good set of saddle defrost vents?

[tll74]

Originally Posted by yellowGT

I need a set of taillight lenses with the backup lenses as well. If you have any please let me know.

Also I need some trim pieces from a 72 chevy. I could send you a picture so you know what I'm talking about but they are the thick side molding with the wood grain in the middle.

Sure no problem. 12.50 each on the tail light lenses, 7.50 each on the late reverse lens and 10.00 each for the early (bullseye). plus 6.00 shipping. No need for pics on the moldings. Which ones do you need?

Originally Posted by 54blackhornet

Tom you in LaGrande tomorrow ? If so bring parts ok...

Hey Jack, I sent you a text tonight. I'm leaving Thursday morning. I have your parts in the truck.

Originally Posted by BigRed76

Would you happen to have a good set of saddle defrost vents?

Maybe , I'll look.

Thanks Guys, Tom

[pimpston65]

ok cool, if its 67 style i'll take the arm rest...

[yellowGT]

The two that go on the doors and the one that goes on driver side bedside closer to bumper.

[tll74]

Originally Posted by BigRed76

Would you happen to have a good set of saddle defrost vents?

I looked for the vents and came up empty.

Originally Posted by pimpston65

ok cool, if its 67 style i'll take the arm rest...

I looked and can't find it. I must have sold it. Sorry

Originally Posted by yellowGT

The two that go on the doors and the one that goes on driver side bedside closer to bumper.

I have the door pieces and the fender piece. I'll get some pics.

Thanks, Tom

[carrtrkk]

Greetings
Do you have air cleaner bar that supports the air cleaner housing for 292 that sits across the valve cover

[Mapearso]

hello Tom. Looking for a few bits for my 72 SWB --

*Back window trim (and rubber
*complete shortbed upper & lower trim (-- I'll take misc pieces if you have, including longbed upper trim!)
*rear tailgate trim upper, left and right sides
*radio delete plate any color
*T3 headlights
*Very nice set of outer door handles
*1 AC vent ball, nice no pitting?

Thanks!!

[danny69]

Do you still have the e brake cable from cab to the intermediate cable for swb I also need the intermediate cable too. What would it be shipped to 74801. Thanks. Danny

[danny69]

Forgot to say e cable is for 69 short bed 350 2wheel drive. Thanks

[russsmith32]

How much for a set of 4 side markers for a 68 shipped to 37642? Also do you have and parking brake levers that go inside the drum brake assembly?

[tll74]

Originally Posted by carrtrkk

Greetings
Do you have air cleaner bar that supports the air cleaner housing for 292 that sits across the valve cover

Maybe I will look.

Originally Posted by Mapearso

hello Tom. Looking for a few bits for my 72 SWB --

*Back window trim (and rubber
*complete shortbed upper & lower trim (-- I'll take misc pieces if you have, including longbed upper trim!)
*rear tailgate trim upper, left and right sides
*radio delete plate any color
*T3 headlights
*Very nice set of outer door handles
*1 AC vent ball, nice no pitting?

Thanks!!

*Back window trim (and rubber 65.00 for nice rubber and nice trim.
*complete shortbed upper & lower trim...just some DQ lwb uppers 20.00ish each
*rear tailgate trim upper, left and right sides....15.00 each
*radio delete plate any color...green in color 45.00 with clips
*T3 headlights...I rat hole these for my own projects.
*Very nice set of outer door handles...50.00ish on my best pair, I need to look at them.
*1 AC vent ball, nice no pitting? Probably have to look. 12.50
All plus shipping

Originally Posted by danny69

Do you still have the e brake cable from cab to the intermediate cable for swb I also need the intermediate cable too. What would it be shipped to 74801. Thanks. Danny

Yes and maybe on the intermediate. 25.00 and 20.00(if I have).

Originally Posted by russsmith32

How much for a set of 4 side markers for a 68 shipped to 37642? Also do you have and parking brake levers that go inside the drum brake assembly?

26.00 for markers fronts will have some fade. C10 or C20 and if C20 is it a HO72 or Dana 60? Reguardless I have all of them 8.00 each.

Sorry for the delay been off the grid during Christmas spending time shopping and family. All prices are plus shipping.
Thanks, Tom

[danny69]

You don't happen to have power steering bracket for 307 short water pump. Thanks Danny