steering wheel gap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gr8scott51 · 01-26-2004, 04:43 PM

I put a Lumina wheel on my stock column this weekend. Love the wheel, but I have about a 1/4" gap between the wheel and the column. Anybody else had to fix this problem?

Scott

smokekiki · 01-26-2004, 05:17 PM

Under the hood, at the lower part of the colum there are 3 screws around the colum.loosen these screws and rotate them around the colum.This will move the wheel in and out a little.Should close the gap for you.

gr8scott51 · 01-26-2004, 05:22 PM

Thanks!!

01-26-2004, 04:43 PM	#1
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	steering wheel gap I put a Lumina wheel on my stock column this weekend. Love the wheel, but I have about a 1/4" gap between the wheel and the column. Anybody else had to fix this problem? Scott __________________ Silence is golden, duct tape is silver. - Scott

01-26-2004, 05:17 PM	#2
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	Under the hood, at the lower part of the colum there are 3 screws around the colum.loosen these screws and rotate them around the colum.This will move the wheel in and out a little.Should close the gap for you. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

01-26-2004, 05:22 PM	#3
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	Thanks!! __________________ Silence is golden, duct tape is silver. - Scott

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.