Inner rocker/backing plate and floor? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CAJ1971 · 01-07-2015, 03:25 PM

Can someone tell from this picture what all I need besides the outer rocker that is almost taken out? Will an inner rocker fill in the gap? Or do I need the floor outerside as well?

**chiefcfd** · 01-07-2015, 03:44 PM

Can't be 100% sure from the pic. Looks like part of the floor is gone too. Just get the patch panels and cut out till you get to good metal and then replace what you need.

**CUSTOM/10** · 01-07-2015, 03:56 PM

Can't tell until you get the whole rocker off but most likely at least these two maybe floor suports & kick panel:

**michael bustamante** · 01-07-2015, 04:30 PM

i have a set of inner rocker panals that i wont be using. if you need them pm me with an e mail and i can send pics

CAJ1971 · 01-07-2015, 05:02 PM

Thanks for the input. I stopped by SW Calssics in Arlington and just picked up a few different panel parts for it. I'll just bring back what I don't need. First time I've been there. If any of you local DFW guys haven't been there they are pretty helpful and friendly. Prices aren't bad either.

w00dst0ck · 01-07-2015, 05:39 PM

If they're anything like the 64-66 panels, fitment is poor :/

Then again I'm not sure how many different manufacturers exist. Seems like 1-2 that supply everyone.

01-07-2015, 03:25 PM	#1
CAJ1971 Registered User Join Date: Dec 2014 Location: Red Oak Texas Posts: 57	Inner rocker/backing plate and floor? Can someone tell from this picture what all I need besides the outer rocker that is almost taken out? Will an inner rocker fill in the gap? Or do I need the floor outerside as well? Attached Images

01-07-2015, 03:44 PM	#2
chiefcfd Senior Member Join Date: Oct 2010 Location: Cadiz, Ky Posts: 514	Re: Inner rocker/backing plate and floor? Can't be 100% sure from the pic. Looks like part of the floor is gone too. Just get the patch panels and cut out till you get to good metal and then replace what you need. __________________ 1972 Chevy LWB Roadster 1999 Chevy Silverado 2wd 2015 Chevy High Country 4x4 Crew Cab

01-07-2015, 03:56 PM	#3
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Re: Inner rocker/backing plate and floor? Can't tell until you get the whole rocker off but most likely at least these two maybe floor suports & kick panel: Attached Images __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

01-07-2015, 04:30 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Inner rocker/backing plate and floor? i have a set of inner rocker panals that i wont be using. if you need them pm me with an e mail and i can send pics __________________ 1967custom

01-07-2015, 05:02 PM	#5
CAJ1971 Registered User Join Date: Dec 2014 Location: Red Oak Texas Posts: 57	Re: Inner rocker/backing plate and floor? Thanks for the input. I stopped by SW Calssics in Arlington and just picked up a few different panel parts for it. I'll just bring back what I don't need. First time I've been there. If any of you local DFW guys haven't been there they are pretty helpful and friendly. Prices aren't bad either.

01-07-2015, 05:39 PM	#6
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Inner rocker/backing plate and floor? If they're anything like the 64-66 panels, fitment is poor :/ Then again I'm not sure how many different manufacturers exist. Seems like 1-2 that supply everyone.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.