SoCal checkin' in - Page 76 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hopped up · 12-02-2013, 12:05 AM

Quote:

Originally Posted by Dano69c10

Hey Andy, I'll trade you that 15" Disc Brake Rim for those Exhaust Manifolds you had.
Dano

thas fine with me dan as long as its a 15 inch 6 lug rim?

C0UCH · 12-05-2013, 12:11 AM

Quote:

Originally Posted by VDOG

That looks great. What type of welder are you using?

I want to say its a Millermatic 135 but I could be mistaken on the number.

InitialBoss · 12-06-2013, 01:26 PM

Hey guys, I'm going to attempt to replace the fuel hose that runs from the steel line to the pump, in my truck. It appears to be leaking right where the hose clamp is. In case things go south, would anybody be around on the boards or in the riverside area to lend a hand? I've never done this before and am hoping its not too difficult. Or do you guys suggest taking it to a shop? This operation will occur tomorrow or Sunday.

**robnolimit** · 12-06-2013, 01:56 PM

Take offs for sale. '63-'87 drop spindles and 6-lug disc brakes. These were on a '72 C10. they are 73-87 type. I also have the outer tie rods and adapter sleave for 63-72 trucks. For 63-70 trucks, the ball joints would need to be changed. Good condition, mild rust. $200.00. - don't P.M. or E-mail. no, no cheaper. just come and get them. No Limit 455 s. D street #4, San Bernardino 92401. 909-386-7637

Lee H · 12-06-2013, 02:06 PM

Quote:

Originally Posted by InitialBoss

Hey guys, I'm going to attempt to replace the fuel hose that runs from the steel line to the pump, in my truck. It appears to be leaking right where the hose clamp is. In case things go south, would anybody be around on the boards or in the riverside area to lend a hand? I've never done this before and am hoping its not too difficult. Or do you guys suggest taking it to a shop? This operation will occur tomorrow or Sunday.

This is an easy maintenance item to do. If you run into problems I will help you out. The trick it to have a tool to cut off the flow of gas or change it out real quick. Even a vise grip will work in a pinch. I'll PM you my cell number. Lee

budnikguy · 12-06-2013, 02:09 PM

Simple removal and replacement deal..just take your time. No reason to Pay a shop to do it...

Quote:

Originally Posted by InitialBoss

Hey guys, I'm going to attempt to replace the fuel hose that runs from the steel line to the pump, in my truck. It appears to be leaking right where the hose clamp is. In case things go south, would anybody be around on the boards or in the riverside area to lend a hand? I've never done this before and am hoping its not too difficult. Or do you guys suggest taking it to a shop? This operation will occur tomorrow or Sunday.

InitialBoss · 12-06-2013, 08:24 PM

Quote:

Originally Posted by Lee H

This is an easy maintenance item to do. If you run into problems I will help you out. The trick it to have a tool to cut off the flow of gas or change it out real quick. Even a vise grip will work in a pinch. I'll PM you my cell number. Lee

Thanks Lee and everyone. I feel like I can do this myself but didn't want to run into issues. It's always nice to have a buddy. Thanks for the help.

Lee, if you can PM me your number, that would be great. Just in case. Correction. I think I just got it.

ItsRandy · 12-06-2013, 11:03 PM

Quote:

Originally Posted by InitialBoss

Hey guys, I'm going to attempt to replace the fuel hose that runs from the steel line to the pump, in my truck. It appears to be leaking right where the hose clamp is. In case things go south, would anybody be around on the boards or in the riverside area to lend a hand? I've never done this before and am hoping its not too difficult. Or do you guys suggest taking it to a shop? This operation will occur tomorrow or Sunday.

Where in Riverside? If you do it on Saturday I can help you out. It's supposed to rain Saturday. Are you working inside? I can't help on Sunday, I have a car show I'm going to. Call me if you want: 714.623.0853

ItsRandy · 12-06-2013, 11:04 PM

Quote:

Originally Posted by Lee H

This is an easy maintenance item to do. If you run into problems I will help you out. The trick it to have a tool to cut off the flow of gas or change it out real quick. Even a vise grip will work in a pinch. I'll PM you my cell number. Lee

In a pinch? Pun intended?

InitialBoss · 12-06-2013, 11:30 PM

Quote:

Originally Posted by ItsRandy

Where in Riverside? If you do it on Saturday I can help you out. It's supposed to rain Saturday. Are you working inside? I can't help on Sunday, I have a car show I'm going to. Call me if you want: 714.623.0853

I'm near Alessandro close to Mo Val. I'll work on it tomorrow in my garage. I'm hoping if it rains tomorrow, it'll rain in the evening. I plan to work on it in the afternoon.

ItsRandy · 12-07-2013, 12:25 AM

Quote:

Originally Posted by InitialBoss

I'm near Alessandro close to Mo Val. I'll work on it tomorrow in my garage. I'm hoping if it rains tomorrow, it'll rain in the evening. I plan to work on it in the afternoon.

The morning is better for me, the earlier the better (8-9am). I am helping a buddy of mine in the afternoon. It's supposed to start raining tonight and rain most of the day tomorrow.

InitialBoss · 12-07-2013, 01:07 AM

Quote:

Originally Posted by ItsRandy

The morning is better for me, the earlier the better (8-9am). I am helping a buddy of mine in the afternoon. It's supposed to start raining tonight and rain most of the day tomorrow.

Well, I can pretty much start anytime in the morning. I'll be up. 8 or 9 or earlier. My 18 month old daughter usually wakes up early. So I'm up too. Ha ha. I can even be up at 7AM. If you can lend a hand, I'll be up whenever is best for you, bro!

InitialBoss · 12-07-2013, 02:51 PM

Huge thank you to Randy who helped me today and to all who offered! I am so grateful to you guys on this board. You all have been so nice and I can't thank you all enough. We got the hose replaced with no problems like you all mentioned. But. The fuel pump did start to go out and leak from underneath! Lol. I'm going to pick up a new one today and then try to replace it. Wish me luck guys!!

hopped up · 12-08-2013, 11:54 PM

Where's the pictures from today's meet ? I didn't make it and wanna see some pix. Lol

50bomb · 12-18-2013, 10:57 AM

I always wanted to go to a show where I could meet some board members. I ended up selling my old chevy trucks. NOw I own a 2001 silverado single cab shorty. Never owned anything newer than 67 till now. NO regrets on doing so but hopefully I can still and eventually come out and see all your guys cool rides AAANNDD maybe someday get me my dream truck, 61 k10 shortbed.

VDOG · 12-18-2013, 07:55 PM

Quote:

Originally Posted by 50bomb

I always wanted to go to a show where I could meet some board members. I ended up selling my old chevy trucks. NOw I own a 2001 silverado single cab shorty.

Of course your still welcomed to hangout at a meet or show with us. We might harass you a bit for trading up, but its all good. LOL

hopped up · 12-19-2013, 12:18 AM

Quote:

Originally Posted by 50bomb

I always wanted to go to a show where I could meet some board members. I ended up selling my old chevy trucks. NOw I own a 2001 silverado single cab shorty. Never owned anything newer than 67 till now. NO regrets on doing so but hopefully I can still and eventually come out and see all your guys cool rides AAANNDD maybe someday get me my dream truck, 61 k10 shortbed.

of course you can still meet up with us. maybe ill come in my 01 silverado so you dont feel out of place lol

50bomb · 12-19-2013, 04:00 PM

haha VDOG! Right on Hopped up, Sounds good.

Dano69c10 · 12-21-2013, 06:56 PM

Quote:

Originally Posted by 50bomb

I always wanted to go to a show where I could meet some board members. I ended up selling my old chevy trucks. NOw I own a 2001 silverado single cab shorty. Never owned anything newer than 67 till now. NO regrets on doing so but hopefully I can still and eventually come out and see all your guys cool rides AAANNDD maybe someday get me my dream truck, 61 k10 shortbed.

I'll bring my 07 silverado...

VDOG · 12-22-2013, 06:07 PM

Quote:

Originally Posted by Dano69c10

I'll bring my 07 silverado...

Ok this newer truck stuff is getting outta hand darnit!!! LOL

50bomb · 12-22-2013, 06:12 PM

Quote:

Originally Posted by VDOG

Ok this newer truck stuff is getting outta hand darnit!!! LOL

OOPS

Dano69c10 · 12-22-2013, 06:20 PM

Hope everyone has a nice Holiday Season! (Christmas, Hanukah, etc...) and a Happy New Year, but is anyone going to the Early Rodders meet on Jan 4? I think this time we should grab some breakfast nearby...
Dano

hopped up · 12-22-2013, 06:39 PM

Quote:

Originally Posted by Dano69c10

Hope everyone has a nice Holiday Season! (Christmas, Hanukah, etc...) and a Happy New Year, but is anyone going to the Early Rodders meet on Jan 4? I think this time we should grab some breakfast nearby...
Dano

me and brook will be there.

ItsRandy · 12-23-2013, 12:32 AM

Early Rodder's meet Jan. 4th? Where? What time?

hopped up · 12-23-2013, 01:23 AM

Quote:

Originally Posted by ItsRandy

Early Rodder's meet Jan. 4th? Where? What time?

same place as last time randy. the movie theater in montrose

12-06-2013, 01:26 PM	#1878
InitialBoss Registered User Join Date: Jul 2013 Location: So Cal Posts: 292	Re: SoCal checkin' in Hey guys, I'm going to attempt to replace the fuel hose that runs from the steel line to the pump, in my truck. It appears to be leaking right where the hose clamp is. In case things go south, would anybody be around on the boards or in the riverside area to lend a hand? I've never done this before and am hoping its not too difficult. Or do you guys suggest taking it to a shop? This operation will occur tomorrow or Sunday.

12-06-2013, 01:56 PM	#1879
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: SoCal checkin' in Take offs for sale. '63-'87 drop spindles and 6-lug disc brakes. These were on a '72 C10. they are 73-87 type. I also have the outer tie rods and adapter sleave for 63-72 trucks. For 63-70 trucks, the ball joints would need to be changed. Good condition, mild rust. $200.00. - don't P.M. or E-mail. no, no cheaper. just come and get them. No Limit 455 s. D street #4, San Bernardino 92401. 909-386-7637 __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!

12-07-2013, 02:51 PM	#1888
InitialBoss Registered User Join Date: Jul 2013 Location: So Cal Posts: 292	Re: SoCal checkin' in Huge thank you to Randy who helped me today and to all who offered! I am so grateful to you guys on this board. You all have been so nice and I can't thank you all enough. We got the hose replaced with no problems like you all mentioned. But. The fuel pump did start to go out and leak from underneath! Lol. I'm going to pick up a new one today and then try to replace it. Wish me luck guys!!

12-08-2013, 11:54 PM	#1889
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: SoCal checkin' in Where's the pictures from today's meet ? I didn't make it and wanna see some pix. Lol

12-18-2013, 10:57 AM	#1890
50bomb Registered User Join Date: Jul 2010 Location: Hemet,Ca Posts: 1,502	Re: SoCal checkin' in I always wanted to go to a show where I could meet some board members. I ended up selling my old chevy trucks. NOw I own a 2001 silverado single cab shorty. Never owned anything newer than 67 till now. NO regrets on doing so but hopefully I can still and eventually come out and see all your guys cool rides AAANNDD maybe someday get me my dream truck, 61 k10 shortbed. __________________ Stovebolt-It is painted

12-19-2013, 04:00 PM	#1893
50bomb Registered User Join Date: Jul 2010 Location: Hemet,Ca Posts: 1,502	Re: SoCal checkin' in haha VDOG! Right on Hopped up, Sounds good. __________________ Stovebolt-It is painted

12-22-2013, 06:20 PM	#1897
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: SoCal checkin' in Hope everyone has a nice Holiday Season! (Christmas, Hanukah, etc...) and a Happy New Year, but is anyone going to the Early Rodders meet on Jan 4? I think this time we should grab some breakfast nearby... Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

12-23-2013, 12:32 AM	#1899
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: SoCal checkin' in Early Rodder's meet Jan. 4th? Where? What time?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.