NY WTB dana 60 rear housing (leaf)

[gmc 2500 4x4]

another snag in my build, outer spindle wore out to much, and didnt know they are part of the housing. anyway all i need is a bare housing for my '69 4x4 3/4ton w/leafs. i rebuilt the hubs and tried to mount pass side and it has at least 1/4'' gone where the inner bearing rides on! anyone close 2 me have one?

[Ol Blue K20]

Talk to a mobile truck or tractor mechanic. They have guys that can weld that up and machine it specs

[gmc 2500 4x4]

i thought of that. see what happens. when i was in high school alotta my buddies had parts. that was the 80's lol

[neo1370]

I have one from a 2 wheel drive

[gmc 2500 4x4]

ttt

[gmc 2500 4x4]

ttt

[w314speed]

I have a complete 4x4 housing. I'll get some pics after I clean the bearing and seal areas. Dan

[gmc 2500 4x4]

thank you dan

[Critterman71]

I have a 3/4 ton out of a long horn I just had it gone through and put on the shelf for another build but i would consider selling just the housing but would make a sweet deal on the whole thing and it is a posi to boot.

[w314speed]

There is a ridge on the lower side of the the surface that the inner bearing rides on. That is where the weight of the vehicle and load rides on. It is probably the same as what you have with yours. Sorry.

I worked with tractor trailers and when a bearing failed, a mobile company came in, cut the complete spindle off and welded on a new one. Short of finding a nice low mileage housing, you might consider this. Dan

[gmc 2500 4x4]

thanx dan. just my luck lol

[gmc 2500 4x4]

Originally Posted by Critterman71

I have a 3/4 ton out of a long horn I just had it gone through and put on the shelf for another build but i would consider selling just the housing but would make a sweet deal on the whole thing and it is a posi to boot.

pm me the details

[gmc 2500 4x4]

Originally Posted by Critterman71

I have a 3/4 ton out of a long horn I just had it gone through and put on the shelf for another build but i would consider selling just the housing but would make a sweet deal on the whole thing and it is a posi to boot.

can u send pics, measure perch to perch

[Critterman71]

yes I can it will be Saturday before I can get to it but i will for sure sorry I missed your last post.

[gmc 2500 4x4]

no problem, if its what I need would you ship?

[Critterman71]

Yes i would I will have to get a pallet but would be no problem to ship it

[gmc 2500 4x4]

let me know