OR Parting 1986 Suburban K20 4x4

[DLTruck1973]

Originally Posted by USSkoval

43140, thanks. Do you have any belts at all for the 3rd row seat? I could deal with a different color all the way back there.

I will check shipping on Monday for you.

I have nothing in any color for the third row seat belts at this time.

Thank you and have a good weekend,
Thomas

[dablueduck]

Hello, I am looking for a radiator support with the quad headlights over and under. Thanks

[DLTruck1973]

Originally Posted by dablueduck

Hello, I am looking for a radiator support with the quad headlights over and under. Thanks

Are you talking about this style used on the early 90's Suburbans and Blazers?

Let me know. I can check on it Monday and get back with you.

Thank you for the interest,
Thomas

[burnem]

what is the rear end gear ratio and price?

[burnem]

I am looking for a rear end 1987 3/4 ton 4.10 that both brake cables route to the drivers side

[DLTruck1973]

Originally Posted by burnem

I am looking for a rear end 1987 3/4 ton 4.10 that both brake cables route to the drivers side

I can check that ratio for you tomorrow and get back with you. You need both rear cables out of the backing plates and the intermediate cable, correct?

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by burnem

I am looking for a rear end 1987 3/4 ton 4.10 that both brake cables route to the drivers side

The only thing I have here currently is a completely rebuilt unit. New ring and pinion, new carrier, new bearings, new seals, etc.

It is ready to install and go. $650.00 plus shipping or picked up.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by DLTruck1973

All I would have is the front passenger, tan in color with the receiver included for $65.00 plus shipping. If you provide a zip code, I can check on shipping if interested.

OK,

I can ship this to you for $13.58 shipping so $78.58 total.

I will need to know if it is a bench seat or buckets. I have you covered either way.

Let me know,
Thomas

[Seventy468]

Originally Posted by DLTruck1973

The only thing I have here currently is a completely rebuilt unit. New ring and pinion, new carrier, new bearings, new seals, etc.

It is ready to install and go. $650.00 plus shipping or picked up.

Thank you for the interest,
Thomas

If you come across a open diff carrier for a corp. 14 bolt using a 3:73 gear I'd be a buyer. Shipped to 46124

[DLTruck1973]

Originally Posted by Seventy468

If you come across a open diff carrier for a corp. 14 bolt using a 3:73 gear I'd be a buyer. Shipped to 46124

I have one. I will pull the side bearings and make sure of no side bearing spin. It will; come with internals for $125.00

Shipping is $65.00, so $190.00 total. Let me know if interested.

Thank you,
Thomas

[Seventy468]

Originally Posted by DLTruck1973

I have one. I will pull the side bearings and make sure of no side bearing spin. It will; come with internals for $125.00

Shipping is $65.00, so $190.00 total. Let me know if interested.

Thank you,
Thomas

Thomas, how much for the whole corp 14? They're going for about $200 here, if you're somewhere near that it might be more cost effective for me to buy the whole thing.


Thanks

[dablueduck]

Originally Posted by DLTruck1973

Are you talking about this style used on the early 90's Suburbans and Blazers?

Let me know. I can check on it Monday and get back with you.

Thank you for the interest,
Thomas

No, the over/under style. Mine is a 1984. Thanks

[DLTruck1973]

Originally Posted by Seventy468

Thomas, how much for the whole corp 14? They're going for about $200 here, if you're somewhere near that it might be more cost effective for me to buy the whole thing.


Thanks

I have a complete for $350.00. I just quoted a freight ship for one to a person in NY and it was $358.00 just to ship it.

Let me know and thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by dablueduck

No, the over/under style. Mine is a 1984. Thanks

I have a real nice rust free radiator support for an 1984 with quad head lights for $85.00 plus shipping.

If interested, I can check shipping if you provide me your zip code.

Thank you,
Thomas

[neginfluence04]

I'm not interested in buying anything but have a question if you dont mind?

Is that rear bumper just a plan truck step bumper? And if so will does it bolt to the factory frame or does it need special brackets?

[DLTruck1973]

Originally Posted by neginfluence04

I'm not interested in buying anything but have a question if you dont mind?

Is that rear bumper just a plan truck step bumper? And if so will does it bolt to the factory frame or does it need special brackets?

That was an aftermarket bumper and came with brackets from the bumper supplier specifically for the application. It did not come from the factory that way.

Hope this helps,
Thomas

[wannabefastcrf]

Do you have a cupholder insert for a center console?

[DLTruck1973]

Originally Posted by wannabefastcrf

Do you have a cupholder insert for a center console?

Sorry but I do not have any at this time.

Thank you for the interest,
Thomas

[b&a72]

What kind of shape is the radiator core support and headlight buckets in? Any rust?

[DLTruck1973]

Originally Posted by b&a72

What kind of shape is the radiator core support and headlight buckets in? Any rust?

I have what you need for $75.00 plus shipping. It will be rust and damage free.

Do you need it for single or dual head lights. It may not be the one of of this Suburban but I have them.

Let me know.

Thank you,
Thomas

[beamn7]

How much for the oil filler extension tube and oil fill cap shipped to 92595?

[DLTruck1973]

Originally Posted by beamn7

How much for the oil filler extension tube and oil fill cap shipped to 92595?

I will see what I have and get back with you soon.

Thank you for the interest,
Thomas

[beamn7]

Thanks Thomas! Should be metal just like the one in the 'burb and twist into the flange mount valve covers.

[b&a72]

[QUOTE=DLTruck1973;7035727]I have what you need for $75.00 plus shipping. It will be rust and damage free.

Do you need it for single or dual head lights. It may not be the one of of this Suburban but I have them.

I need it for single headlight 83-88 configuration.

[DLTruck1973]

[quote=b&a72;7036161]

Originally Posted by DLTruck1973

I have what you need for $75.00 plus shipping. It will be rust and damage free.

Do you need it for single or dual head lights. It may not be the one of of this Suburban but I have them.

I need it for single headlight 83-88 configuration.

I looked at the core support and got you a shipping quote. The actual one you would get is hard to get good photos of so I used another one to get weight and size.

The shipping to Mesa AZ for this would be $171.90. If you are interested, the total would be $246.90 and I will get it out and take photos of it but it is a nice piece.

Let me know,
Thank you
Thomas