MN Big Parts,4x4 stuff, Possible delivery MN, IA, NE, KS, OK, NM, CO, NW TX

[Vintage Windmills]

Big parts, I am taking a trip with trailer to Albuquerque later this month and could drop off if you aren't too far out of my way. Going down through west iowa to eastern KS, down through OKC to amarillo to albuquerque. Returning through the colorado springs area then back east.

I have axles, cabs that need lower rust fixed, doors, transmissions, transfer cases ($150 to 200), frames, hoods (rust free $75 to $125), chassis, and even complete parts trucks. I will not ship anything at this time. Here is a look.

First part is a 68 4x4 lwb frame that a member is interested in. He has 1st shot but is just interested in frame with x members, springs, and shackles. Axles available.

[Vintage Windmills]

surface rust:

[Dirt's72]

Do you still have the shortbed 4x4 with l6 I spied in one of the pics? Any three speed transmissions? If you need a hand when you get here holler.
Im not far from where you will be going I believe.

[BLT gmc]

Interested in a complete T-221(handle,knob,shift parts,10 spline adapter, coupler) for a SM465. 20 miles north of Omaha NE right off I-29. Paint divider trim (3 piece) on back of cab.Bruce

[DeadheadNM]

Jud I'd be interested in an OEM 71-72 Chevy front bumper for ABQ delivery. Thanks, Pete

[chewysask]

Interested in( 4 ) 6 bolt 4 nub rims if available for 72 jimmy 4x4
Thanks Carey

[Vintage Windmills]

Originally Posted by Dirt's72

Do you still have the shortbed 4x4 with l6 I spied in one of the pics? Any three speed transmissions? If you need a hand when you get here holler.
Im not far from where you will be going I believe.

No shortbed 4x4's left, I sold the white one months ago to jmader. The blue C10 up in post #2 has a 3 on the tree trans that I think is good (as far as I can tell)

Originally Posted by BLT gmc

Interested in a complete T-221(handle,knob,shift parts,10 spline adapter, coupler) for a SM465. 20 miles north of Omaha NE right off I-29. Paint divider trim (3 piece) on back of cab.Bruce

I have everything except maybe the coupler. Should be able to drop it off or at minimum meet you in Omaha.

Originally Posted by DeadheadNM

Jud I'd be interested in an OEM 71-72 Chevy front bumper for ABQ delivery. Thanks, Pete

Pete, do you desire chrome or painted? Some fixable dents ok?

[DeadheadNM]

Originally Posted by Vintage Windmills

Pete, do you desire chrome or painted? Some fixable dents ok?

If you happen to have a very nice chrome one that's usable as is I'd take it. Otherwise, a painted or chrome example straight as possible and suitable for re-plating would work.

As an aside, I have a clean pair of dealer type Travel Tanks at home in ABQ you are welcome to if you have need for them.

[74baggedbug]

Price for the upper metal radiator hose please .. Thank you

[Dirt's72]

I would take the 3-speed three on tree trans, hopefully a Saginaw?
Also would you have a good radiator for l6 equipped motor. And good pair of used inner fenders? Thanks
Derrick

[71GeneralMotorsCorp]

Any blazer stuff? I need the tranny crossmembers and transfer case crossmembers for a TH350 truck. I'm in South east kansas..

[57taskforce]

I'd be interested in a 4 core radiator if you've got one in decent shape. I'd be interested in an abq delivery as well. Also might be interested in a 4:11 ho52 as well if you've got a decent one.

[BLT gmc]

Cost of T case? Bruce

[ironfish96]

Needing a blue hood for a 72 c10. Do you happen to have one?

[Vintage Windmills]

Originally Posted by chewysask

Interested in( 4 ) 6 bolt 4 nub rims if available for 72 jimmy 4x4
Thanks Carey

I think the only ones I have would be 6 inch wide, 15" diameter. Not interested in shipping though, sorry. Only looking to drop stuff off on my trip.

Originally Posted by DeadheadNM

If you happen to have a very nice chrome one that's usable as is I'd take it. Otherwise, a painted or chrome example straight as possible and suitable for re-plating would work.

As an aside, I have a clean pair of dealer type Travel Tanks at home in ABQ you are welcome to if you have need for them.

Pete, let me think on the tanks and check on bumpers.

Originally Posted by 74baggedbug

Price for the upper metal radiator hose please .. Thank you

Sorry no shipping at this time.

Originally Posted by Dirt's72

I would take the 3-speed three on tree trans, hopefully a Saginaw?
Also would you have a good radiator for l6 equipped motor. And good pair of used inner fenders? Thanks
Derrick

Derrick, Ishould have a radiator. 2 core would be standard with standard trans. I will see if I have 2 or 3 core. I'm sure its the original 1970 3 spd, it left the factory with. Can get a casting number or pic if it helps.

Originally Posted by 71GeneralMotorsCorp

Any blazer stuff? I need the tranny crossmembers and transfer case crossmembers for a TH350 truck. I'm in South east kansas..

The xmembers is spoken for but if he doesn't take it this weekend I'll let you know.

Originally Posted by 57taskforce

I'd be interested in a 4 core radiator if you've got one in decent shape. I'd be interested in an abq delivery as well. Also might be interested in a 4:11 ho52 as well if you've got a decent one.

Tyler, I've got it all, HO52 is from a K20. $400 delivered total with radiator. or if a locked brake broke brake drum HO52 is ok, $285 delivered total with radiator. Not sure how good the brakes are on the better HO52 as but on either the gears are good.

[Vintage Windmills]

Originally Posted by BLT gmc

Cost of T case? Bruce

For the complete T-221(handle,knob,shift parts, tcase to trans adapter mount, but NO shaft coupler) off a SM420 and the paint divider trim in nice driver quality to omaha would be $200.

Originally Posted by ironfish96

Needing a blue hood for a 72 c10. Do you happen to have one?

Just a dark blue original paint one, its really nice but don't know how I'd get it to you unless you'd drive up to the panhandle.

[57taskforce]

Ok Id be fine with the broke drum ho52 as its gonna get disks any way. My next question is when do you plan to be in abq? That's the biggest factor in me being able to do it.

[Dirt's72]

Derrick, Ishould have a radiator. 2 core would be standard with standard trans. I will see if I have 2 or 3 core. I'm sure its the original 1970 3 spd, it left the factory with. Can get a casting number or pic if it helps.


Pics and a number would be great Jud. Thank
You.

[BLT gmc]

This it correct the SM 420 adapter/input shaft is different the the SM465? I have a SM 465 project. Thank you, Bruce

[Vintage Windmills]

Originally Posted by BLT gmc

This it correct the SM 420 adapter/input shaft is different the the SM465? I have a SM 465 project. Thank you, Bruce

Bruce, its your lucky day. I was wrong and its the one year SM465/T221 setup, from 1969. I should keep the sleeve spline coupler though for my other truck.

[Vintage Windmills]

Pics for Derek, Sorry no casting number that i can read yet due to dirt and grime. Hopefully this will allow you to confirm its the right one?

[Vintage Windmills]

Originally Posted by 57taskforce

Ok Id be fine with the broke drum ho52 as its gonna get disks any way.

Here are some more pics of it.

[michael bustamante]

got a 67 GMC grill and rad support? to albuquerque?

[Dirt's72]

Jud I believe that is a Saginaw.

[Vintage Windmills]

Originally Posted by michael bustamante

got a 67 GMC grill and rad support? to albuquerque?

Sorry no extra now.

Originally Posted by Dirt's72

Jud I believe that is a Saginaw.

Cool, how's $125 dropped off sound for it? I can tell you it shifts into gears, engages, and goes back to nuetral but don't know more than that. It was a local farmer truck very original so probably never hot rodded or beat on. Can As for the rad, did you want 2, 3, 4 core?