wire harness for stereo? :Wiring: - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BladeX · 02-11-2004, 01:24 AM

I do beleive every one is diffrent for every deck.

I wanted to take the deck out my caddy and put it in my truck.

not sure how hard it is to rewire it? I wouldnt just chop off the harness from the caddy would i?

Blue82Chev · 02-11-2004, 01:33 AM

What year is that caddy? I used to have an '86 Buick Century that had the same stereo harness as my '82 truck

BladeX · 02-11-2004, 01:33 AM

1984 Cadillac Cimmaron 2.0L

Blue82Chev · 02-11-2004, 01:35 AM

Whats the year of the truck?

BladeX · 02-11-2004, 01:35 AM

1986 GMC k1500

Blue82Chev · 02-11-2004, 01:37 AM

I would think that it is the same harness.

BladeX · 02-11-2004, 01:38 AM

well i think someone installed a custom stereo in it before me cause they dont match. do i just chop it off and wire in the new one?

Blue82Chev · 02-11-2004, 01:42 AM

Well if it is an aftermarket stereo, the right way to do it would be to buy the harness adapter to fit your truck.

BladeX · 02-11-2004, 01:44 AM

just a random question.

can you just cut them and tape the corrasponding colors togethor with electrical tape?

*1FaastC10* · 02-11-2004, 01:51 AM

Quote:

Originally posted by BladeX
just a random question.

can you just cut them and tape the corrasponding colors togethor with electrical tape?

i dont see why not. i've done several like that. you'd e safer to use crimp connectors though.

Blue82Chev · 02-11-2004, 01:55 AM

If you want to get really neat with it, you could solder and use shrink tubing.

greenhorn male · 02-11-2004, 01:59 AM

Quote:

Originally posted by BladeX
well i think someone installed a custom stereo in it before me cause they dont match. do i just chop it off and wire in the new one?

If your not going to reuse your original radio just cut the wires on the radio side of the harness connector. Keep you truck harness intact. Then just crimp connect or solder the corresponding wires from the new radio. This way if you have to pull your radio later you could just unplug it at the harness.

BladeX · 02-11-2004, 02:04 AM

does anyone know how much speakers/subs that go behind your seats cost?

I got a box and obviosuly that wont work id need a foot and half to fit my box in there.

And do you mount the amp on the actual metal of the truck or put a board or something there?

BladeX · 02-11-2004, 02:05 AM

oh and i have exposed speaker wires running arcross the floor on the edge near the door.

I dont have them things ya can run them under. Any ideas on how to like protect them?

*1FaastC10* · 02-11-2004, 02:08 AM

mount the amp under the seat. cost depends on what you want. years about i spend 15.00/ea for 2 8" subs from JC Whitney, and $30 for an amp. a friend gave me a box to put them in.

BladeX · 02-11-2004, 02:09 AM

I got a 360 watt 4 OHM mono channel amp . And a 500 watt 4 channel 4 chanel amp.

Is heat an issue being under your seat and all?

*1FaastC10* · 02-11-2004, 02:10 AM

is that LineX on your dash? if so, got any more interior pics? im thinking of doing my interior in blue. what trans / case does that have in it?

BladeX · 02-11-2004, 02:13 AM

WOoo dont get all mechanical on me. im mad n00b. i dont even know where a transfer case is located. lol. know what it does but not were it be!

And its herculiner. Idiot before me did it not me.

I dont have anymore pics of it because i hate it. Im a carpet kinda man. To bad its a 120 for new carpet.

Its even on the doors. And on the dash.

*1FaastC10* · 02-11-2004, 02:16 AM

is the case a part time case 2hi-n-4hi-4lo or a full time 4hi loc-4 hi-n-4 lo-4lo loc?

BladeX · 02-11-2004, 02:17 AM

*swwwoOOOSH!* that is the sound of that sentence flying over my head.

*1FaastC10* · 02-11-2004, 02:21 AM

shift indicator for the transfer case. if you didnt understand what i just said, are you sure you should be pulling the stereo out of the dash in the first place?

BladeX · 02-11-2004, 02:22 AM

very good point you have there.

maybe i should try carpeting it before i touch anything electrical?
lol

greenhorn male · 02-11-2004, 02:46 AM

The shifter looks like an NP208 I had in my 85 burb

*1FaastC10* · 02-11-2004, 02:55 AM

what year is the truck?

BladeX · 02-11-2004, 02:57 AM

86

http://www.jcwhitney.com/webapp/wcs/...X&appId=497784

Anyone seen or heard anything about these?^^^

02-11-2004, 01:24 AM	#1
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	wire harness for stereo? :Wiring: I do beleive every one is diffrent for every deck. I wanted to take the deck out my caddy and put it in my truck. not sure how hard it is to rewire it? I wouldnt just chop off the harness from the caddy would i?

02-11-2004, 01:33 AM	#2
Blue82Chev Murph Join Date: Jan 2004 Location: Central Minnesota Posts: 206	What year is that caddy? I used to have an '86 Buick Century that had the same stereo harness as my '82 truck __________________ Mike Vehicles: 1982 C20 2003 GMC Sierra

02-11-2004, 01:35 AM	#4
Blue82Chev Murph Join Date: Jan 2004 Location: Central Minnesota Posts: 206	Whats the year of the truck? __________________ Mike Vehicles: 1982 C20 2003 GMC Sierra

02-11-2004, 01:37 AM	#6
Blue82Chev Murph Join Date: Jan 2004 Location: Central Minnesota Posts: 206	I would think that it is the same harness. __________________ Mike Vehicles: 1982 C20 2003 GMC Sierra

02-11-2004, 01:42 AM	#8
Blue82Chev Murph Join Date: Jan 2004 Location: Central Minnesota Posts: 206	Well if it is an aftermarket stereo, the right way to do it would be to buy the harness adapter to fit your truck. __________________ Mike Vehicles: 1982 C20 2003 GMC Sierra

02-11-2004, 01:38 AM	#7
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	well i think someone installed a custom stereo in it before me cause they dont match. do i just chop it off and wire in the new one?

02-11-2004, 01:44 AM	#9
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	just a random question. can you just cut them and tape the corrasponding colors togethor with electrical tape?

02-11-2004, 01:55 AM	#11
Blue82Chev Murph Join Date: Jan 2004 Location: Central Minnesota Posts: 206	If you want to get really neat with it, you could solder and use shrink tubing. __________________ Mike Vehicles: 1982 C20 2003 GMC Sierra

02-11-2004, 02:04 AM	#13
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	does anyone know how much speakers/subs that go behind your seats cost? I got a box and obviosuly that wont work id need a foot and half to fit my box in there. And do you mount the amp on the actual metal of the truck or put a board or something there?

02-11-2004, 02:05 AM	#14
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	oh and i have exposed speaker wires running arcross the floor on the edge near the door. I dont have them things ya can run them under. Any ideas on how to like protect them?

02-11-2004, 02:08 AM	#15
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	mount the amp under the seat. cost depends on what you want. years about i spend 15.00/ea for 2 8" subs from JC Whitney, and $30 for an amp. a friend gave me a box to put them in.

02-11-2004, 02:09 AM	#16
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	I got a 360 watt 4 OHM mono channel amp . And a 500 watt 4 channel 4 chanel amp. Is heat an issue being under your seat and all?

02-11-2004, 02:10 AM	#17
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	is that LineX on your dash? if so, got any more interior pics? im thinking of doing my interior in blue. what trans / case does that have in it?

02-11-2004, 02:13 AM	#18
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	WOoo dont get all mechanical on me. im mad n00b. i dont even know where a transfer case is located. lol. know what it does but not were it be! And its herculiner. Idiot before me did it not me. I dont have anymore pics of it because i hate it. Im a carpet kinda man. To bad its a 120 for new carpet. Its even on the doors. And on the dash.

02-11-2004, 02:16 AM	#19
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	is the case a part time case 2hi-n-4hi-4lo or a full time 4hi loc-4 hi-n-4 lo-4lo loc?



Register or Log In To remove these advertisements.

02-11-2004, 02:17 AM	#20
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	swwwoOOOSH! that is the sound of that sentence flying over my head.

02-11-2004, 02:21 AM	#21
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	shift indicator for the transfer case. if you didnt understand what i just said, are you sure you should be pulling the stereo out of the dash in the first place?

02-11-2004, 02:22 AM	#22
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	very good point you have there. maybe i should try carpeting it before i touch anything electrical? lol

02-11-2004, 02:46 AM	#23
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	The shifter looks like an NP208 I had in my 85 burb __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

02-11-2004, 02:55 AM	#24
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	what year is the truck?

02-11-2004, 02:57 AM	#25
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	86 http://www.jcwhitney.com/webapp/wcs/...X&appId=497784 Anyone seen or heard anything about these?^^^

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.