Installing Le Carra Steering Wheel Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Already Gone** · 07-23-2015, 05:03 PM

I am going to replace my stock steering wheel on my 72 with the Le Carra I had on my other truck. I'll be keeping the original as it's in pretty good shape with a 70's wrap on it. When i got the Le Carra I never used the horn wire because the horn never worked on the other truck. My question is does the flat connector clip into the back of the plastic centre piece. I ask because the connector is bent back into itself and unless I use tremendous pressure it won't clip onto the flat connector on the plastic piece. I hope the pics show my problem. While I'm here if someone can tell me why my photos keep getting posted sideways I'd appreciate it.

**Jurassic-1** · 07-23-2015, 06:25 PM

Yes it hooks on the back of the horn button and the other end should fit inti the turn signal cancel ring.

**Already Gone** · 07-23-2015, 06:36 PM

Quote:

Originally Posted by Jurassic-1

Yes it hooks on the back of the horn button and the other end should fit inti the turn signal cancel ring.

Thanks. I was just afraid of breaking it is so tight.

**Jurassic-1** · 07-24-2015, 12:55 AM

Are you replacing the stock wheel? It looks in very good shape.

**Already Gone** · 07-24-2015, 09:18 AM

Quote:

Originally Posted by Jurassic-1

Are you replacing the stock wheel? It looks in very good shape.

Yes, I had the Le Carra on my last truck for 6/7 years and I really liked its size and feel. I will be keeping the original with the wrap.

07-23-2015, 05:03 PM	#1
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,107	Installing Le Carra Steering Wheel Question I am going to replace my stock steering wheel on my 72 with the Le Carra I had on my other truck. I'll be keeping the original as it's in pretty good shape with a 70's wrap on it. When i got the Le Carra I never used the horn wire because the horn never worked on the other truck. My question is does the flat connector clip into the back of the plastic centre piece. I ask because the connector is bent back into itself and unless I use tremendous pressure it won't clip onto the flat connector on the plastic piece. I hope the pics show my problem. While I'm here if someone can tell me why my photos keep getting posted sideways I'd appreciate it. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

07-23-2015, 06:25 PM	#2
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: Installing Le Carra Steering Wheel Question Yes it hooks on the back of the horn button and the other end should fit inti the turn signal cancel ring.

07-24-2015, 12:55 AM	#4
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: Installing Le Carra Steering Wheel Question Are you replacing the stock wheel? It looks in very good shape.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.