![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2015
Location: Waleska Ga
Posts: 32
|
Brake time
Hi all I just finished my front disk kit. Now I am going to start on the lines and master cylinder. I am going to the junk yard in the am. My thoughts are I am going to get a booster/master cylinder and proportioning valve from a 71-87 c10. Then use the junk master cylinder as a core. Will this work.
|
![]() |
![]() |
![]() |
#2 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Brake time
That will work if you don't mind the look of those booster brackets and drilling holes in your firewall. Also you will not have as good a connection between your booster/master and the pedal bracket than if you were to use the correct factory mounting holes.
All of my booster brackets use the factory mounting holes.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2012
Location: Rathdrum ID
Posts: 1,128
|
Re: Brake time
I used capt's bracket and a new MC and booster from a 71 Impala. Works great and looks great. I did forget to paint the MC and booster but I'm taking the front everything off and will have to wire wheel it and give it a coat of POR15.
__________________
66 shorty ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2015
Location: Waleska Ga
Posts: 32
|
Re: Brake time
Thanks guys This is what I have on the truck now. What about adding a 71 impala m/c and proportioning valve. I know I will also have to change the rod.
|
![]() |
![]() |
![]() |
#5 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: Brake time
You can use the '71 Impala booster and master, or any of the compatible boosters listed in post #183 of the '63-'66 booster bracket for sale thread. You do not have to use the master cylinder that originally came with a given booster. You just need to use a master that is correct for the length of the intermediate pushrod.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2015
Location: Waleska Ga
Posts: 32
|
Re: Brake time
Hey Captain I have another question for you or anyone else. I went to the junk yard today and found a few master cylinders and brake boosters 82-02 s10. Three questions all the master cylinders were plastic. Can they be changed with a metal one of the same year? Also the proportioning valves had what looked like some kind of plug. And would I need to use one of your mounting brackets with this setup? Thanks
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|