OR 67-72 cross members

[DLTruck1973]

DLTruck1973 has just about any frame cross member you would need for your 2wd or 4x4 pick ups, suburbans and blazers.

Here are some prices for a few of the ones we have. If you do not see what you need, please ask as we have many items not listed.

All prices are plus shipping. Please respond to this thread and remember that I have more than one of a certain cross member in most but not all cases. First "I'll take it" will hold the part until a shipping quote is made. At that time the buyer will have 24 hours to make payment or the part will go to the next in line.

4x4 engine cross member $85.00 each
4x4 trans/transfer case cross member $60.00 each
67-72 very front cross member (under fan shroud) $25.00 each
2wd V8 manual trans cross member $40.00 each
2wd TH350/TH400 automatic cross member $40.00 each
2wd C10/C20 trailing arm cross member $50.00 each
very rear cross member (has hole for tail light wiring harness) 2wd $30.00
very rear cross member (has hole for tail light wiring harness) 4x4 $40.00
cross member above spare tire. (the small one) $20.00

Thank you for looking. Please let us know if you have any other request for frame cross members, spring hangers, shock mounts, etc. We only sell above average clean parts.

Thomas

[4X4GMC1972]

How about a TH400 crossmember shipped to 75158 Thanks, Todd

[69Tom]

What's shipping for a 2WD/TH400 cross member to Phoenix 85042. Thanks.

[PICKMUP]

WOW! Nice!

[The Pitt]

Rear shock cross member with spring plates? I see what I think is a couple in the pic but its not listed? Or just rear spring plates shipped to 32566.

[DLTruck1973]

Originally Posted by 4X4GMC1972

How about a TH400 crossmember shipped to 75158 Thanks, Todd

The 2wd TH350/TH400 cross member is $35.00 plus $24.50 for shipping which will be $59.50 total.

Let me know and I will PM you payment details.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by 69Tom

What's shipping for a 2WD/TH400 cross member to Phoenix 85042. Thanks.

Shipping for you is $16.50 and the total would be $51.50

Let me know and I will send you a PM with payment details.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by PICKMUP

WOW! Nice!

Appreciated Frank

[DLTruck1973]

Originally Posted by The Pitt

Rear shock cross member with spring plates? I see what I think is a couple in the pic but its not listed? Or just rear spring plates shipped to 32566.

Here you go,

The cross member in the photo is $40.00 for the 2wd coil spring shock cross member.

I do have a pair of upper spring pads but they have been cut on for an air bag installation in the past. I think they are repairable and still good solid steel. I would like $25.00 for the the pair.

Shipping for everything would be $27.50 so your total if you are interested is $92.50

Let me know and I will send you a PM with payment details.

Thank you,
Thomas

[69Tom]

Originally Posted by DLTruck1973

Shipping for you is $16.50 and the total would be $51.50

Let me know and I will send you a PM with payment details.

Thank you,
Thomas

PM sent.

[69Tom]

Originally Posted by DLTruck1973

Shipping for you is $16.50 and the total would be $51.50

Let me know and I will send you a PM with payment details.

Thank you,
Thomas

Payment sent. Thanks!

[DLTruck1973]

Originally Posted by 69Tom

Payment sent. Thanks!

Thank you Tom,

We appreciate the business.

It will ship today.

Thomas

[4X4GMC1972]

Originally Posted by DLTruck1973

The 2wd TH350/TH400 cross member is $35.00 plus $24.50 for shipping which will be $59.50 total.

Let me know and I will PM you payment details.

Thank you for the interest,
Thomas

I will take it. Thanks, Todd

[DLTruck1973]

Originally Posted by 4X4GMC1972

I will take it. Thanks, Todd

Thank you Todd,

PM on the way.

Thomas

[Rocket3]

Originally Posted by DLTruck1973

Here you go,

The cross member in the photo is $40.00 for the 2wd coil spring shock cross member.

I do have a pair of upper spring pads but they have been cut on for an air bag installation in the past. I think they are repairable and still good solid steel. I would like $25.00 for the the pair.

Shipping for everything would be $27.50 so your total if you are interested is $92.50

Let me know and I will send you a PM with payment details.

Thank you,
Thomas

Are these the only pair of upper spring pads? Am I seeing in 1st pic shock crossmembers w/spring pads attached? Repairs are for '70 2wd SWB,coil spring frame. Mine only have 1 hole in middle,some deformity around rivet holes from age/removal,and are close to 1/2 as thick in middle circular portion. Do yours have thickness deterioration/severe pitting in middle? I could weld in new patch on mine,but if yours are better,it would be a smaller patch @ bolt hole. Shipping to 42056 KY? Pics are mine.

[1972K20]

Did I see leaf springs in one pic? Are those for sale?

[DLTruck1973]

Originally Posted by Rocket3

Are these the only pair of upper spring pads? Am I seeing in 1st pic shock crossmembers w/spring pads attached? Repairs are for '70 2wd SWB,coil spring frame. Mine only have 1 hole in middle,some deformity around rivet holes from age/removal,and are close to 1/2 as thick in middle circular portion. Do yours have thickness deterioration/severe pitting in middle? I could weld in new patch on mine,but if yours are better,it would be a smaller patch @ bolt hole. Shipping to 42056 KY? Pics are mine.

Currently the only upper spring pads I have are the ones shown in post #9. These have been cut out and extra holes drilled for air bags by a previous owner. If you look closely, you can still see part of the original hole in the middle. These plates are around 1/8 steel and now where near 1/2 thick. If yours are 1/2 inch thick then they must have some heavy rust slag stuck to them.

My plates are very solid steel and very repairable.

They are $25.00 for the pair plus $13.00 to ship with in CON US.

Let me know,
Thank you,
Thomas

[DLTruck1973]

Originally Posted by 1972K20

Did I see leaf springs in one pic? Are those for sale?

I have many leaf springs for many different applications. What do you need them for? Let me know and I will see what we have.

Thank you for the interest,
Thomas

[1972K20]

I'll send you a PM so I don't mess this thread up.

[Rocket3]

Originally Posted by DLTruck1973

Currently the only upper spring pads I have are the ones shown in post #9. These have been cut out and extra holes drilled for air bags by a previous owner. If you look closely, you can still see part of the original hole in the middle. These plates are around 1/8 steel and now where near 1/2 thick. If yours are 1/2 inch thick then they must have some heavy rust slag stuck to them.

My plates are very solid steel and very repairable.

They are $25.00 for the pair plus $13.00 to ship with in CON US.

Let me know,
Thank you,
Thomas

I meant the thickness of the middle area of flat portion has rusted away to 1/2 of the original. I will take these. PM w/order details.

[Rocket3]

Originally Posted by DLTruck1973

Currently the only upper spring pads I have are the ones shown in post #9. These have been cut out and extra holes drilled for air bags by a previous owner. If you look closely, you can still see part of the original hole in the middle. These plates are around 1/8 steel and now where near 1/2 thick. If yours are 1/2 inch thick then they must have some heavy rust slag stuck to them.

My plates are very solid steel and very repairable.

They are $25.00 for the pair plus $13.00 to ship with in CON US.

Let me know,
Thank you,
Thomas

I meant the thickness of the middle area of flat portion has rusted away to 1/2 of the original. These are mine after blasting. KY truck.I will take these. PM w/order details.

[DLTruck1973]

Originally Posted by Rocket3

I meant the thickness of the middle area of flat portion has rusted away to 1/2 of the original. These are mine after blasting. KY truck.I will take these. PM w/order details.

OK I understand what you mean now. These ones are good and solid but need the repair in the center.

I will send you a PM with payment information.

Thank you,
Thomas

[DLTruck1973]

ttt

Plenty of cross members available

Contact me with you specific needs.

Thank you,
Thomas

[DLTruck1973]

ttt

[Seanext]

Do you have a 292 cross member for a 4X4?