MI Wire Harness pig tails and cuts - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

greywurm · 01-11-2016, 10:45 AM

And I have gauges, but no tach... yet.

**DaHos** · 01-13-2016, 10:47 AM

Quote:

Originally Posted by twouvakind

I'll take the 6? cavity for A/C switch if you find it, thanks.

Looks like the 2 I found have had a meltdown, no go.....sry

Quote:

Originally Posted by greywurm

Do you still have an underdash harness? Mine is a mess. 71 auto with a/c

No good auto w gauge harness at this time, all stick or warning light styles for 69-72.

greywurm · 01-13-2016, 01:43 PM

Quote:

Originally Posted by DaHos

No good auto w gauge harness at this time, all stick or warning light styles for 69-72.

OK. Thanks for checking

**DaHos** · 01-13-2016, 01:58 PM

Quote:

Originally Posted by greywurm

OK. Thanks for checking

Found one at the shop this am......no ac wiring. Pink power wire needs a splice put in as it has been stripped for a tie in. $75 shipped

greywurm · 01-13-2016, 04:43 PM

Quote:

Originally Posted by DaHos

Found one at the shop this am......no ac wiring. Pink power wire needs a splice put in as it has been stripped for a tie in. $75 shipped

I'll take it and see what I can do. Sending PM

**DaHos** · 01-14-2016, 01:25 PM

All paid items have shipped this AM....

Undone · 01-14-2016, 07:47 PM

How about an under dash AC harness for a 71?

Hunter67stepside · 01-14-2016, 08:41 PM

i would take the dome wire if you would include the plug for 10. Does that work?

**DaHos** · 01-15-2016, 09:47 AM

Quote:

Originally Posted by Undone

How about an under dash AC harness for a 71?

No good ones, just cuts, sry....

Quote:

Originally Posted by Hunter67stepside

i would take the dome wire if you would include the plug for 10. Does that work?

Thats fine, PM sent

CC69Rat · 01-15-2016, 10:08 AM

I am looking for the wiring that goes up to the tail lights, rear side marker lights, reverse lights, and tag light. If I could find that whole piece that runs from the frame rail up controlling the rear panel I'd take the whole thing.. pig tails, sockets for the tail light housings etc.

68 CST truck. Not sure if a 68 had a tag light, but I could run the later stuff too, no worries, let me know what you may have... Thanks.

**DaHos** · 01-15-2016, 10:19 AM

Quote:

Originally Posted by CC69Rat

I am looking for the wiring that goes up to the tail lights, rear side marker lights, reverse lights, and tag light. If I could find that whole piece that runs from the frame rail up controlling the rear panel I'd take the whole thing.. pig tails, sockets for the tail light housings etc.

68 CST truck. Not sure if a 68 had a tag light, but I could run the later stuff too, no worries, let me know what you may have... Thanks.

Chad, I pulled one yesterday from a 71, It has been tapped for a trailer harness and will need some repair but it is complete. $20 shipped or trade even up for you truck?

**DaHos** · 01-15-2016, 10:21 AM

Quote:

Originally Posted by NoNeck

I am also looking for a complete tail light harness for a '68 fleet side (if that matters). I need it complete with side marker plugs. Thank you sir!

POP

See above ^^^^^^^

Hunter67stepside · 01-15-2016, 04:02 PM

Payment sent

b.sharp · 01-15-2016, 08:54 PM

Do your you have a front harness for a 69 GMC? I need everything from the firewall plug out.

NoNeck · 01-16-2016, 09:29 AM

DaHos, we will take the complete wiring harness Chad and I asked you about. Chad, pay the man.

PayPal OK? If so, PM Chad your PayPal info.

Thank you sir!

POP

**DaHos** · 01-16-2016, 10:20 AM

Quote:

Originally Posted by Hunter67stepside

Payment sent

Ill get the dome lamp harness out on Monday

Quote:

Originally Posted by b.sharp

Do your you have a front harness for a 69 GMC? I need everything from the firewall plug out.

I do but the front and side marker lamp wires were cut off, the rest is very nice. Have the pigtails (included) $50 shipped, lmk if interested.

Quote:

Originally Posted by NoNeck

DaHos, we will take the complete wiring harness Chad and I asked you about. Chad, pay the man.

PayPal OK? If so, PM Chad your PayPal info.

Thank you sir!

POP

Did you get the reverse light housing issue resolved or do you need a pair also? PayPal is fine.....

NoNeck · 01-16-2016, 01:13 PM

Quote:

Did you get the reverse light housing issue resolved or do you need a pair also?

No, I used my Dremmal to shave small amounts off of the fiber disc but at the point the bulb twisted into the socket the disc broke into tiny little pieces. The problem is with the size of the repro fiber disc.

How much for the two backup light pigtails? Could you ship them with the harness?

Thanks for all your help. Chad will be with you on the payment soon.

POP

54belair · 01-16-2016, 10:10 PM

Shipment received---thank you , sir-----nice collection!!

toolboxchev · 01-17-2016, 12:38 AM

How about a fuse panel with the wiring for a 70 v8 with gauges?

**DaHos** · 01-17-2016, 10:12 AM

Quote:

Originally Posted by CC69Rat

I am looking for the wiring that goes up to the tail lights, rear side marker lights, reverse lights, and tag light. If I could find that whole piece that runs from the frame rail up controlling the rear panel I'd take the whole thing.. pig tails, sockets for the tail light housings etc.

68 CST truck. Not sure if a 68 had a tag light, but I could run the later stuff too, no worries, let me know what you may have... Thanks.

PM sent..

Quote:

Originally Posted by toolboxchev

How about a fuse panel with the wiring for a 70 v8 with gauges?

Auto or Manual? And do you need an entire plug and play harness or just the fuse box w leads (have some I've cut)?

toolboxchev · 01-17-2016, 01:35 PM

Auto if possible

Hunter67stepside · 01-22-2016, 09:19 AM

Got my dome light wire. Thanks good deal! Here a bump for you

NoNeck · 01-22-2016, 02:03 PM

We got our tail light harness in the mail yesterday. It will work just fine. Thanks!

POP

b.sharp · 01-24-2016, 09:42 PM

wires were cut off, the rest is very nice. Have the pigtails (included) $50 shipped, lmk if interested.

I would prefer to have one that is complete. Thank you but Inwill keep looking.

SaltyC20 · 03-02-2016, 07:04 PM

Digging this up from the archives in the hopes of finding a Blower Motor Switch connector for an AC truck. Have one around?

01-11-2016, 10:45 AM	#76
greywurm Registered User Join Date: Jun 2014 Location: Temecula Posts: 227	Re: Wire Harness pig tails and cuts And I have gauges, but no tach... yet. __________________ 71 Long bed C10 w/68 front clip, 350 SBC+HEI, TH350 06 Yukon XL Denali - Stock

01-14-2016, 01:25 PM	#81
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	Re: Wire Harness pig tails and cuts All paid items have shipped this AM.... __________________ 1967 C10 SWB Owner - Rustbelt Restorations

01-14-2016, 07:47 PM	#82
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Wire Harness pig tails and cuts How about an under dash AC harness for a 71?

01-14-2016, 08:41 PM	#83
Hunter67stepside Registered User Join Date: Oct 2013 Location: Brentwood, Tn Posts: 315	Re: Wire Harness pig tails and cuts i would take the dome wire if you would include the plug for 10. Does that work?

01-15-2016, 10:08 AM	#85
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,210	Re: Wire Harness pig tails and cuts I am looking for the wiring that goes up to the tail lights, rear side marker lights, reverse lights, and tag light. If I could find that whole piece that runs from the frame rail up controlling the rear panel I'd take the whole thing.. pig tails, sockets for the tail light housings etc. 68 CST truck. Not sure if a 68 had a tag light, but I could run the later stuff too, no worries, let me know what you may have... Thanks. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-15-2016, 04:02 PM	#88
Hunter67stepside Registered User Join Date: Oct 2013 Location: Brentwood, Tn Posts: 315	Re: Wire Harness pig tails and cuts Payment sent

01-15-2016, 08:54 PM	#89
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: Wire Harness pig tails and cuts Do your you have a front harness for a 69 GMC? I need everything from the firewall plug out.

01-16-2016, 09:29 AM	#90
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Wire Harness pig tails and cuts DaHos, we will take the complete wiring harness Chad and I asked you about. Chad, pay the man. PayPal OK? If so, PM Chad your PayPal info. Thank you sir! POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

01-16-2016, 10:10 PM	#93
54belair Registered User Join Date: Mar 2011 Location: bolivar, mo Posts: 839	Re: Wire Harness pig tails and cuts Shipment received---thank you , sir-----nice collection!! __________________ 1997 shortie stepside 1968 short stepside 1966 mustang 1966 chevelle ss Dont always go the cheapest route--You can save yourself into the poorhouse! My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=489030

01-17-2016, 12:38 AM	#94
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Wire Harness pig tails and cuts How about a fuse panel with the wiring for a 70 v8 with gauges?

01-17-2016, 01:35 PM	#96
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: Wire Harness pig tails and cuts Auto if possible

01-22-2016, 09:19 AM	#97
Hunter67stepside Registered User Join Date: Oct 2013 Location: Brentwood, Tn Posts: 315	Re: Wire Harness pig tails and cuts Got my dome light wire. Thanks good deal! Here a bump for you

01-22-2016, 02:03 PM	#98
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Wire Harness pig tails and cuts We got our tail light harness in the mail yesterday. It will work just fine. Thanks! POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

01-24-2016, 09:42 PM	#99
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: Wire Harness pig tails and cuts wires were cut off, the rest is very nice. Have the pigtails (included) $50 shipped, lmk if interested. I would prefer to have one that is complete. Thank you but Inwill keep looking.

03-02-2016, 07:04 PM	#100
SaltyC20 Registered User Join Date: Nov 2014 Location: Chandler, Arizona Posts: 47	Re: Wire Harness pig tails and cuts Digging this up from the archives in the hopes of finding a Blower Motor Switch connector for an AC truck. Have one around? __________________ 1968 Chevy C20



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.