OR 67-72 cross members

[DLTruck1973]

Originally Posted by aotte1

Thomas,

Received the spindles and they will fix me up!
Exactly as you described.
Thanks,
Les

Glad your happy Les.

Thank you for the purchase,

Thomas

[DLTruck1973]

Originally Posted by Frankie P.

In need of a 71 C10 SWB rear shock crossmember. If available, how much shipped to 90715?
Thank you

Nothing ready to ship. Stay tuned. I am going to be parting a 70 C10 coil spring truck in a few weeks.

Thank you for the interest,
Thomas

[Frugalmeyer]

I am looking for a 1972 Blazer 2wd TH400 automatic cross member? Do you have any for sale?

[DLTruck1973]

Originally Posted by Frugalmeyer

I am looking for a 1972 Blazer 2wd TH400 automatic cross member? Do you have any for sale?

Sure no problem. 40.00 plus shipping. Thanks, Tom

[Frugalmeyer]

Tom.
I would like to purchase the crossmember for a 1972 Blazer 2wd TH400 automatic. Shipped to 78233.
Michael

[un4gvn!]

Do you have the cross member that the rear shocks bolt to for coil spring truck? Also, would you have any of the plates that are riveted to the same cross member?

[Frugalmeyer]

I would like to purchase the transmission crossmember for a 1972 C10 or Blazer 2wd TH400 automatic. Shipped to 78233.
Michael

[cbeerman]

Any chance that you have a set of the reinforcement plates that are riveted to the inside of the frame next to the cross member?

Shipping to 08620

Thanks Chuck

[DLTruck1973]

Sorry for delay. Been away from computer for a couple weeks.

Originally Posted by Frugalmeyer

I would like to purchase the transmission crossmember for a 1972 C10 or Blazer 2wd TH400 automatic. Shipped to 78233.
Michael

Micheal, 70.00 shipped

Originally Posted by un4gvn!

Do you have the cross member that the rear shocks bolt to for coil spring truck? Also, would you have any of the plates that are riveted to the same cross member?

Sorry none available right now.

Originally Posted by cbeerman

Any chance that you have a set of the reinforcement plates that are riveted to the inside of the frame next to the cross member?

Shipping to 08620

Thanks Chuck

Sorry none available right now.

Thanks, Tom

[CrewCab59]

Tom ,

Do you have a 292 4x4 engine crossmember ? If so shipping to 37721

Thanks

[1968vetL-71]

Any upper rear crossmember (4x4) ?
Also upper shock mounts? (4x4)

Just curious about a front spring hanger thats cast for 67-68 4x4?

Thanks !!

[DLTruck1973]

Originally Posted by CrewCab59

Tom ,

Do you have a 292 4x4 engine crossmember ? If so shipping to 37721

Thanks

Sorry I don't have that one. Actually I have never had a 292 4x4 truck.

Originally Posted by 1968vetL-71

Any upper rear crossmember (4x4) ?
Also upper shock mounts? (4x4)

Just curious about a front spring hanger thats cast for 67-68 4x4?

Thanks !!

Yes on the crossmember and shock mounts. Don't have the front hangers. 100.00 for the crossmember and 45.00 for the pair of shock mounts, plus shipping. Both cut off and ready. Send zip for shipping cost if interested.

Thanks, Tom

[1968vetL-71]

37129. Probably just crossmember. Thx

[DLTruck1973]

Originally Posted by 1968vetL-71

37129. Probably just crossmember. Thx

Shipping is 29.00 via UPS. Thanks, Tom

[reb162]

Tom,
Looking for several frame members for a 1971 V8 short base coil frame.
Looking for paypal quote with shipping to 45431:

1. All Four Cab Mounts (2 front and 2 Rear)
2. Rear Cross member (with hole for electrical Harness)
3. Upper Spring Pads/Mounts (L&R)
4. Brackets that attaches engine Cradle to Frame (L&R) see picture

My engine cradle also has some pinholing, not major but would be curious what one would cost to ship.

Thanks
-Bob

[71proj]

Hi Tom,

I am wondering if you happen to have, or will have, a couple of frame sections. I need a section a couple of feet on either side of the rear spring perches. For both the left and right frame rails. The truck is a 71 C10 (2wd). Also the top spring mounts if you have a set.

Thanks!

[TahoeK10]

Looking for the rear most crossmember for a 71' 4x4 swb, shipped to 96150.

[D.W.jr]

looking for the engine stands for a 4x4 k10 with a v8. the short pieces that go from top of frame to crossmember. My frame is missing them. Thanks

[chickamaugajay]

Looking for 4x4 engine cross member, and engine stands SBC.
Also Front Spring hanger 4x4

30707

Thank you Sir.

Jay

[hoss67]

Would you happen to have the cross sills for a wood bed swb 1967 c10? Need all of them even the rear cross sill.

[reb162]

Not sure Tom is on the board anymore...he hasn't replied to any posts and any of my PMs from several weeks. Hope he is OK.
-Bob

[c10-72 II]

Looking for a 1972 th350/th400 2wd trans crossmember and also do you have any upper and lower control arms for a 1967-1972 C10? thanks

[Oregon 1967 GMC]

Looking for a 67 rear crossmember, right before the bumper. It's a C-10 Short Stepside. Uprooting tree stumps with chain way back when, here's what it looks like: http://67-72chevytrucks.com/vboard/s...d.php?t=711020 AND I can drive down and pickup. Thanks mucho.

[khoult]

I'm looking for the very rear cross member (has hole for tail light wiring harness) 2wd shipped to 36830. If you still have one, please send total and paypal info.

Thanks.

[bubs396]

Im looking for front small block engine crossmember and engine brackets for 1968 K10 chevy pickup shipped to murrysville Pa any help would be appreciated. This is the first time posting on this site so please bear with me. Thanks Rich