Advice Please - Patina Steel Wheels?

[Shake N Bake]

Meet the Grinch! I am just starting to work on this monster and wanted your opinions. Would it look ok to leave these steel wheels in patina and maybe bling them with bullet centers and lugs and maybe thin rings or would it look better to paint the wheels? If so, what color? I ordered a set of 235/75s with thin white walls today. Big thanks!

P.S. I have no idea why my pics are posting upside down. I apologize.

[mehoff400]

heres mine for reference

[NVS-C10]

I'd say shoot them black then satin green to match and scuff some of the green back off to reveal some black.. then mount skinny whitewall facing out with stainless 64-66 dog dish caps.


Or shoot them an almond or biscuit color and paint the white stripes in between your custom trim white.. I think with this color no caps and maybe not whitewall.


Here's one of mine...

[TheCougarine]

i've always kinda liked a nice clean set of wheels on a patina'd truck, black or white would look good for sure. That being said you could always try it out the way you're thinking and then if you don't like it you can always paint them later.

[C/10 King]

Matching patina with less than nice caps, with skinny "dirty" whites is what I used.

[akaupp]

I went black wheels with chrome bullet lugs on mine. Whitewalls Will come later.

[BFoley]

I think darker wheels would look good. I am a huge fan of white steelies, but I think darker ones would bring your truck together a little more. I think it would look great if you shot them with red-oxide, top-coated with a similar shade of green (or a shade darker), and then "distressed" them (sand through green to expose primer and then flatten paint).

[urmyboyblue]

Greetings to the new member who is obviously from Australia.

I would leave the wheels like they are and add old dog dishes to them. Adding something too shiny to the patina'd wheels will look out of place, IMO.

[60chevyjim]

with the whitewalls I would paint the wheels satin black with some chrome lugnuts.
I would paint the side stripe off satin or flat white too with a light coat so it don't cover real good.

[Figuarus]

Originally Posted by akaupp

I went black wheels with chrome bullet lugs on mine. Whitewalls Will come later.

I knew I recognized that truck!

[Figuarus]

This is how my truck looked like when I drove it home, VS when the wheels got a new coat of black Caliper paint and some beauty trim rings from an old Cherokee.

[Shake N Bake]

Originally Posted by NVS-C10

I'd say shoot them black then satin green to match and scuff some of the green back off to reveal some black.. then mount skinny whitewall facing out with stainless 64-66 dog dish caps.


Or shoot them an almond or biscuit color and paint the white stripes in between your custom trim white.. I think with this color no caps and maybe not whitewall.


Here's one of mine...

Hmmm. Good ideas. Thanks and nice truck!

[Shake N Bake]

Originally Posted by c/10 king

matching patina with less than nice caps, with skinny "dirty" whites is what i used.

sweet!

[Shake N Bake]

Thanks to everyone! All of this is great advice and I appreciate you taking the time!

[chevy2tom]

Satin black with caps

[60chevyjim]

chevy2tom I like it !!
how's your engine coming along

[chevy2tom]

Jim, the engine is ready to put in but the engine bay was nasty from the original engine leaking oil so I'm cleaning it up a little & giving it a fresh rattle can black paint job. I'm hoping to get the engine in next week.

[Jferrante]

Gulf Orange

[SLAB_CYCLES]

Everyone does black. I say do a clean off white