LS3 parts Cam, pushrods, valve springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 03-03-2016, 09:57 AM

I have a set of LS3 factory pushrods (7.4) and valve springs with less than 150 miles on them. I also have a L99 factory cam with less 150 miles on it. I replaced the parts when I went with a bigger cam. I will take $100 a set for the valve springs and pushrods and $100 for the cam. Let me know if you have any questions.

**First c10** · 03-04-2016, 03:45 PM

Hey rob,
How would this Cam do in a 5.3 LC9 Gen IV? the stock cam spec's are .467/.479-196/201 at .05 not sure the Lobe separation...

**Hart_Rod** · 03-04-2016, 03:50 PM

Quote:

Originally Posted by First c10

Hey rob,
How would this Cam do in a 5.3 LC9 Gen IV? the stock cam spec's are .467/.479-196/201 at .05 not sure the Lobe separation...

I'm not really sure. Does it have VVT and DOD?

**First c10** · 03-04-2016, 03:53 PM

its a 2011 with DOD no VVT. It also has the 6L80E trans all currently stock

**michael bustamante** · 03-04-2016, 05:17 PM

looks promising rob. will this set up work in my 03 yukon 5.3 set up 4l60 dbw?

**Hart_Rod** · 03-08-2016, 10:14 PM

Quote:

Originally Posted by First c10

its a 2011 with DOD no VVT. It also has the 6L80E trans all currently stock

Does it have a 1 bolt cam? Thats what this one is.

Quote:

Originally Posted by michael bustamante

looks promising rob. will this set up work in my 03 yukon 5.3 set up 4l60 dbw?

Michael - your motor has a 3 bolt cam, so this won't wok on your motor.

**First c10** · 03-09-2016, 12:06 AM

I am not sure on the 2011 LC9 but on the 4.8 I had to replace the sprocket to 3 bolt because the comp cam was a 3 bolt. So I have a singe bolt sprocket. I need to check lift and make sure it wont bring up any problems because the truck runs great just would like a little bigger cam.

**Hart_Rod** · 03-09-2016, 08:50 AM

Quote:

Originally Posted by First c10

I am not sure on the 2011 LC9 but on the 4.8 I had to replace the sprocket to 3 bolt because the comp cam was a 3 bolt. So I have a singe bolt sprocket. I need to check lift and make sure it wont bring up any problems because the truck runs great just would like a little bigger cam.

Kewl. Let me know if it will all work,

.

f.monroe · 07-20-2016, 03:14 PM

How was the idle with this cam? Noticeable chop or smooth? I need to check my sons truck but he has a GM reman 5.3 that he wants to swap the cam in. His truck is a 2006. If I can determine that it will work for him he would take all of it.

**Hart_Rod** · 07-20-2016, 03:52 PM

Quote:

Originally Posted by f.monroe

how was the idle with this cam? Noticeable chop or smooth? I need to check my sons truck but he has a gm reman 5.3 that he wants to swap the cam in. His truck is a 2006. If i can determine that it will work for him he would take all of it.

lmk!

f.monroe · 07-23-2016, 10:56 AM

My son says he needs a different cam so we will pass.
Thanks

**Hart_Rod** · 05-02-2018, 08:54 AM

bump

03-03-2016, 09:57 AM	#1
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	LS3 parts Cam, pushrods, valve springs I have a set of LS3 factory pushrods (7.4) and valve springs with less than 150 miles on them. I also have a L99 factory cam with less 150 miles on it. I replaced the parts when I went with a bigger cam. I will take $100 a set for the valve springs and pushrods and $100 for the cam. Let me know if you have any questions. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-04-2016, 03:45 PM	#2
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: LS3 parts Cam, pushrods, valve springs Hey rob, How would this Cam do in a 5.3 LC9 Gen IV? the stock cam spec's are .467/.479-196/201 at .05 not sure the Lobe separation... __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

03-04-2016, 03:53 PM	#4
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: LS3 parts Cam, pushrods, valve springs its a 2011 with DOD no VVT. It also has the 6L80E trans all currently stock __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!! Last edited by First c10; 03-04-2016 at 04:19 PM.

03-04-2016, 05:17 PM	#5
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: LS3 parts Cam, pushrods, valve springs looks promising rob. will this set up work in my 03 yukon 5.3 set up 4l60 dbw? __________________ 1967custom

03-09-2016, 12:06 AM	#7
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: LS3 parts Cam, pushrods, valve springs I am not sure on the 2011 LC9 but on the 4.8 I had to replace the sprocket to 3 bolt because the comp cam was a 3 bolt. So I have a singe bolt sprocket. I need to check lift and make sure it wont bring up any problems because the truck runs great just would like a little bigger cam. __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

07-20-2016, 03:14 PM	#9
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: LS3 parts Cam, pushrods, valve springs How was the idle with this cam? Noticeable chop or smooth? I need to check my sons truck but he has a GM reman 5.3 that he wants to swap the cam in. His truck is a 2006. If I can determine that it will work for him he would take all of it. __________________ Born and proudly residing in a Red State !

07-23-2016, 10:56 AM	#11
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: LS3 parts Cam, pushrods, valve springs My son says he needs a different cam so we will pass. Thanks __________________ Born and proudly residing in a Red State !

05-02-2018, 08:54 AM	#12
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: LS3 parts Cam, pushrods, valve springs bump __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.