The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-06-2016, 03:00 PM   #1
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
1959 3100 shock help

Hey Guys, I have a stock '59 3100 fleetside. I want to replace the front and rear shocks. Took off front shocks and the number is #39047. On Summits website, that equates to a Gabriel shock (#82047) for a 1957 & 1958.....
NOT a 1959? Why would that be?

For the rear shocks I have #739060 on the shock.....Googled this number and can't find anything. I was looking for front and rear shock options. Any help with part numbers would be great. Why are the rear shock numbers different than the front?

Brothers has stock replacement shocks, BUT, they are $50 each. Way too pricey for me.
What are you guys using for stock replacement shocks front and rear?
Tod59 is offline   Reply With Quote
Old 03-06-2016, 03:49 PM   #2
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: 1959 3100 shock help

No real help here, my shocks are for a lifted truck. But I found the attached at Gabriels site. Determine the end configuration, measure the static length at ride height, then the minimum and maximum from the ones you removed. Charts should have one that will work. Good counter man at a real parts store could probably find one based on the existing too.

http://gabriel.com/wp-content/upload...re_Catalog.pdf
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 03-06-2016, 04:14 PM   #3
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,131
Re: 1959 3100 shock help

Most online parts catalogs end 3100 in 1958 and use 3A for 59 so it shows for 59 as a separate truck from 58 when its not. The shocks are the same

rockauto for 1958 3100
but will fit 1959
ACDELCO 520300 {#88946145} Advantage; Gas Charged
Front; Gas Charged Shocks $16.53

ACDELCO 520310 {#88946155} Advantage; Gas Charged
Rear; 3100 Model; 3200 Model; 3600 Model; Gas Charged Shocks $18.82
dwcsr is offline   Reply With Quote
Old 03-06-2016, 04:20 PM   #4
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Re: 1959 3100 shock help

Thank you for the explanation regarding the 58 & 59 model year. I'll be going to my "old school" guy at the local parts store tomorrow morning.
Tod59 is offline   Reply With Quote
Old 03-06-2016, 04:32 PM   #5
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,708
Re: 1959 3100 shock help

Had to edit after reading DW's post.

Hard to fight with Rock Auto's prices and from experience their service is stellar.

This is what O'Reillys shows and you should be able to cross the Monroe numbers with any shock brand.
http://www.oreillyauto.com/site/c/se...146&year=1959&

Otherwise it's get the extended and compressed lengths and end design and go to the shock catalogs page with the dimensions for shocks
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 03-06-2016, 04:45 PM   #6
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Re: 1959 3100 shock help

Quote:
Originally Posted by mr48chev View Post
Had to edit after reading DW's post.

Hard to fight with Rock Auto's prices and from experience their service is stellar.

This is what O'Reillys shows and you should be able to cross the Monroe numbers with any shock brand.
http://www.oreillyauto.com/site/c/se...146&year=1959&

Otherwise it's get the extended and compressed lengths and end design and go to the shock catalogs page with the dimensions for shocks
I'm the 1st to admit, I'm a computer dummy. I went to the website you posted for me (orielys), seen it already had the 59 truck for shocks, screen asked me my zip code (49203), I hit submit and then nothing? Can't find a price? Sorry, but can you help me out 1 more time?

Probably won't use rockauto....I've never purchased anything on line. Yea, I'm old school.
Tod59 is offline   Reply With Quote
Old 03-06-2016, 05:54 PM   #7
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,708
Re: 1959 3100 shock help

You may have to jump though the hoops to get a store in or close to your zip listed as your "store" Then list the truck in My vehicles to get the price.
I use the page a lot just to find if something fits and compare prices with other sources. You can also hit "compatibility" on the item page and find what else it fits. That works good if you plan on doing some pick a part parts chasing as you then have a list of potential donors.

Another source to check if you don't already do so is Amazon. I pay for my Amazon prime just in the savings on shipping on hard parts for my rigs let alone the savings on a lot of parts. Another thing from them especially on chassis parts is if it shows a "used" one coming from their warehouse it usually means that the box or packaging it is in is damaged and you can save big bucks because the box you are going to throw away is damaged and they are going to ship it in their box anyhow. I'm tight with my money I spend on my hobby stuff and if I can save a few bucks because it comes in a wrinkled box all the more the better as long as it's a top rate part.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 03-08-2016, 07:21 PM   #8
Apachemike
Registered User
 
Apachemike's Avatar
 
Join Date: Sep 2014
Location: Austell, Georgia
Posts: 162
Re: 1959 3100 shock help

If I get a moment I'll get the numbers off my shocks and send them to you
Apachemike is offline   Reply With Quote
Old 03-08-2016, 07:34 PM   #9
1project2many
Registered User
 
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,200
Re: 1959 3100 shock help

Quote:
Another thing from them especially on chassis parts is if it shows a "used" one coming from their warehouse it usually means that the box or packaging it is in is damaged and you can save big bucks because the box you are going to throw away is damaged and they are going to ship it in their box anyhow.
Good tip!
1project2many is offline   Reply With Quote
Old 03-08-2016, 08:30 PM   #10
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Re: 1959 3100 shock help

Quote:
Originally Posted by Apachemike View Post
If I get a moment I'll get the numbers off my shocks and send them to you
Hey, thanks anyway. My small town parts store guy helped me out by cross referencing the part numbers. I got a set of Gabriel's.....I don't have the part numbers right now. Will post at a later date.
Tod59 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com